티타늄 가공에서 절삭력 분석을 위한 ADL 밀링 가공특성
ADL Milling Characteristics for the Analysis of Cutting Force of Titanium Machining
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The purpose of using coolant in machining is both to increase a tool life and also to prevent product deformation and thus, stabilize the surface quality by lubricating and cooling the tool and the machining surface. However, a very small amount of cutting mist should be used because chlorine-based extreme pressure additives are used to generate environmental pollutants in the production process and cause occupational diseases of workers. In this study, medical titanium alloy (Ti-6Al-7Nb) was subjected to a processing experiment by selecting factors and levels affecting cutting power in the processing of the Aerosol Dry Lubrication (ADL) method using vegetable oil. The machining shape was a slot to sufficiently reflect the effect of the cutting depth. As for the measurement of cutting force, the trend of cutting characteristics was identified through complete factor analysis. The factors affecting the cutting force of ADL slot processing were identified using the reaction surface analysis method, and the characteristics of the cutting force according to the change in factor level were analyzed. As the cutting speed increased, the cutting force decreased and then increased again. The cutting force continued to increase as the feed speed increased. The increase in the cutting depth increased the cutting force more significantly than the increase in the cutting speed and the feed speed. Through the reaction surface analysis method, the regression equation for predicting cutting force was identified, and the optimal processing conditions were proposed. The cutting force was predicted from the secondary regression equation and compared with the experimental value.
Abstract
The purpose of using coolant in machining is both to increase a tool life and also to prevent product deformation and thus, stabilize the surface quality by lubricating and cooling the tool and the machining surface. However, a very small amount of cutting mist should be used because chlorine-based extreme pressure additives are used to generate environmental pollutants in the production process and cause occupational diseases of workers. In this study, medical titanium alloy (Ti-6Al-7Nb) was subjected to a processing experiment by selecting factors and levels affecting cutting power in the processing of the Aerosol Dry Lubrication (ADL) method using vegetable oil. The machining shape was a slot to sufficiently reflect the effect of the cutting depth. As for the measurement of cutting force, the trend of cutting characteristics was identified through complete factor analysis. The factors affecting the cutting force of ADL slot processing were identified using the reaction surface analysis method, and the characteristics of the cutting force according to the change in factor level were analyzed. As the cutting speed increased, the cutting force decreased and then increased again. The cutting force continued to increase as the feed speed increased. The increase in the cutting depth increased the cutting force more significantly than the increase in the cutting speed and the feed speed. Through the reaction surface analysis method, the regression equation for predicting cutting force was identified, and the optimal processing conditions were proposed. The cutting force was predicted from the secondary regression equation and compared with the experimental value.
참고문헌 (22)
- Al-Samarrai, I, "Hybrid Cryogenic MQL for Improving Tool Life in Machining of Ti-6Al-4V Titanium Alloy", Journal of Manufacturing Processes, 43(Part A), pp.229~243 (2019)
- Bermingham, M. J, "A Comparison of Cryogenic and High Pressure Emulsion Cooling Technologies on Tool Life and Chip Morphology in Ti– 6Al– 4V Cutting", Journal of Materials Processing Technology, 212(Issue 4), pp.752~765 (2012)
- Caudill, J, "Numerical Modeling of Cutting Forces and Temperature Distribution in High Speed Cryogenic and Flood-cooled Milling of Ti- 6Al-4V,", Procedia CIRP, 82, pp.83~88 (2019)
- Cho, W.S, "Environment-friendly Metal Cutting Technology Using Cooled Air", Korean Society for Precision Engineering, 18(6), pp.114~120 (2001)
- 황영국, "MQL 선삭가공에서 절삭력과 표면거칠기 향상에 관한 연구", 한국생산제조학회지, 15(4), pp.83~91 (2006), 한국생산제조학회
- Gaurav, G, "Assessment of Jojoba as a Pure and Nano-fluid Base oil in Minimum Quantity Lubrication (MQL)Hard-turning of Ti–6Al–4V_ A Step Towards Sustainable Machining", Journal of Cleaner Production, 272, pp.122553~ (2020)
- Han, J.S, "The Characteristics of Titanium Alloy (Ti-6Al-7Nb) for Cutting Force in Aerosol Dry Lubrication (ADL) Machining", 2022 Spring Conference & International Symposium of Korean Society of Industrial and Systems Engineering, pp.134~ (2022)
- Hong, S.Y, "Friction and Cutting Forces in Cryogenic Machining of Ti–6Al–4V", International Journal of Machine Tools & Manufacture, 41(Issue 15), pp.2271~2285 (2001)
- Huanga, B, "Enhanced Machinability of Ti-5553 Alloy from Cryogenic Machining Comparison with MQL and Flood-cooled Machining and Modeling", Procedia CIRP, 31, pp.477~482 (2015)
- 정종윤, "MQL 가공에서 기계가공면의 표면 품위 향상", 한국산업경영시스템학회지, 30(3), pp.54~61 (2007), 한국산업경영시스템학회
- Jung, S.C, "A Study on the Cutting Forces Prediction using Machining Theory in End Milling", Proceedings of the 2004 Fall Conference of the Korean Society of Mechanical Engineers, pp.928~933 (2004)
- Kistler, "Milling with Stationary Dynamometer, CAL -ST-M3-Typical Signal Curves 1", Bia, 11~15
- Lee, Y.M, "Mechanics of Three Dimensional Cutting Processes", pp.110~130 (2005), DAGA
- Lim Y.B, "Design Expert, Minitab and Design of Experiments using R", pp.298~337 (2020), Free Academy
- Park, J.S, "Completion of New Mini-Tab Practice", pp.618~656 (2005), Ire tech Mini Tab Division
- Park, S.H, "Design of Experiments", pp.453~504 (2022), Min Young-Sa
- ROTHER, "Technologie", pp.7~17 (2016), Rother Techno logic GmbH &Co
- Sharma, A, "Potential Use of Minimum Quantity Lubrication (MQL) in Machining of Biocompatible Materials Using Environment Friendly Cutting Fluids: An Overview", Materials Today:Proceedings, 45, pp.5315~5319
- Sharma, A. K, "Effects of Minimum Quantity Lubrication (MQL) in Machining Processes Using Conventional and Nanofluid Based Cutting Fluids, A Comprehensive Review", Journal of Cleaner Production, 127, pp.1~18 (2016)
- Seo, N.S, "Machining Engineering", pp.44~45 (2010), Dong Myeog Sa
- Yoo, S.M, "Materials and Processes in Manufacturing", pp.427~443 (2004), SciTech Media
- Wu, G, "Experimental Investigation of Eco-friendly Cryogenic Minimum Quantity Lubrication (CMQL) Strategy in Machining of Ti–6Al–4V Thin-wall Part", Journal of Cleaner Production, 357, pp.131993~ (2022)