리튬 이온 이차전지의 Quick Charge용 음극소재에 관한 연구
A Study on Quick Charge Anode Materials for Lithium Ion Secondary Battery
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Lithium ion batteries have been extensively used in portable electronic devices due to their high energy density and long cycle life. Recently, lithium ion batteries are required to run conditions that drive up to 1.5C, 2.0C, or higher in order to produce quick charge secondary cells, but the life degradation and safety concerns and rising. In other words, as the number of repetitions of the charge and discharge increases, the binding between the active materials and the ionic conductors becomes loose, and the contact resistance between the particles increases, and due to the increased resistance of the electrode, the battery performance is degraded, and during the life cycle degradation of cathode and anode materials occurs, and it is directly linked to life and safety issues. This study aims to improve the quick charge performance by improving the lithium ion material.
Abstract
Lithium ion batteries have been extensively used in portable electronic devices due to their high energy density and long cycle life. Recently, lithium ion batteries are required to run conditions that drive up to 1.5C, 2.0C, or higher in order to produce quick charge secondary cells, but the life degradation and safety concerns and rising. In other words, as the number of repetitions of the charge and discharge increases, the binding between the active materials and the ionic conductors becomes loose, and the contact resistance between the particles increases, and due to the increased resistance of the electrode, the battery performance is degraded, and during the life cycle degradation of cathode and anode materials occurs, and it is directly linked to life and safety issues. This study aims to improve the quick charge performance by improving the lithium ion material.
참고문헌 (11)
- Oh Seung-Mo, "Electro-chemistry" (2010), Freedom Acaemy
- 정선형, "구리 프탈로시아닌으로 표면처리된 흑연 음극의속도특성 및 저온성능 개선", 전기화학회지, 18(3), pp.130~135 (2015), 한국전기화학회[DOI]
- 강동현, "전구체의 물성에 따른 리튬 2차전지용 Li(Ni0.5Co0.2Mn0.3)O2의 전기화학적 특성 변화", 전기화학회지, 16(4), pp.191~197 (2013), 한국전기화학회
- Kim Young-Hun, "Polymer Science and Technology", 23(3)
- 김민정, "리튬 이차 전지용 실리콘 나노입자 음극의 고온 열안정성에 대한 Lithium bis(oxalato)borate첨가제의 효과", 전기화학회지, 17(2), pp.79~85 (2014), 한국전기화학회
- 유지민, "고전압용 리튬이차전지 바인더 개발을 위한 시뮬레이션 및 전기화학 평가 비교를 통한 산화분해전압 예측 연구", 전기화학회지, 16(3), pp.177~183 (2013), 한국전기화학회[DOI]
- Park Jung-Gi, "Principles and Applications of Lithium Ion Secondary Battery, 239" (2010), Hongrung Publishing Company
- T. M. Bandhauer, , Electrochem. Soc., 158(3)통권 : R1, pp.R1~ (2011)
- 이상건, "격자 볼츠만법을 이용한 리튬이온전지의 전극내 전해액 함침현상에 관한 수치적 연구", 대한기계학회논문집 B, 38(4), pp.357~363 (2014), 대한기계학회
- Li Wang, , Int. J.Electrochem. Sci., 7, pp.345~353 (2012)
- X. Sun, , Electrochem. Commun, 11, pp.1418~ (2009)