소형 특장차량 보조축의 응력분포특성 분석
Analysis of the Stress Distribution Characteristics of Auxiliary Axle in Compact Special Vehicles
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Numerical analysis has been performed to investigate the stress distribution characteristics of auxiliary axle system in a compact special vehicle. Structural and running stability of compact special vehicle is largely affected by auxiliary axle system installation. Structural characteristics of stress and deformation distributions withsafe factor in the auxiliary axle system are analyzed. It can be seen that maximum stress happens near the local axle position, and deformation is also predicted. Simulation results are also compared with experimental test data. These results from this study could be applicable for optimal design of diverse axle systems in the compact special vehicle.
Abstract
Numerical analysis has been performed to investigate the stress distribution characteristics of auxiliary axle system in a compact special vehicle. Structural and running stability of compact special vehicle is largely affected by auxiliary axle system installation. Structural characteristics of stress and deformation distributions withsafe factor in the auxiliary axle system are analyzed. It can be seen that maximum stress happens near the local axle position, and deformation is also predicted. Simulation results are also compared with experimental test data. These results from this study could be applicable for optimal design of diverse axle systems in the compact special vehicle.
참고문헌 (8)
- 배철용, "자동차 부품에 대한 다축 진동내구 시험용 신호처리 방법", 한국소음진동공학회논문집, 18(3), pp.368~374 (2008), 한국소음진동공학회
- 김성민, "변환영역 해석법을 통한 콘크리트 도로 포장의 다축 차량 하중에 대한 응력 분포 분석", 콘크리트학회 논문집, 18(5), pp.695~702 (2006), 한국콘크리트학회
- 진재현, "고하중 차량의 다목적 테스트를 위한 다축 가진 테이블의 기구학 해석", 제어.로봇.시스템학회 논문지, 18(9), pp.823~829 (2012), 제어·로봇·시스템학회[DOI]
- 김현민, "뇌졸중 환자의 손 고정장치 제어를 위한 다축 힘", 모멘트센서 개발, 2011, pp.20(5), 351~356[DOI]
- K. S. Song, "Optimum Design on Special Purpose Vehicle Light Outrigger Pad Using FEM", Proceeding of the Korean Society for Precision Engineering, pp.289~290 (2016)
- S. J. Lee, "Analysis and Investigation of Displacement on Contact Section in Automotive Steel Wheel", Journal of Korean Society of Mechanical Technology, 4(1), pp.95~104 (2002)
- S. Y. Oh, "FEM Analysis and Evaluation of Residual Strength under Biaxial Bend Stress in Brittle Material", Journal of Korean Society of Mechanical Technology, 4(1), pp.195~200 (2002)
- M. S. Lee, "Study on the Structural Properties for the Shape of Special Equipped Vehicles Cross Member", Proceeding of the Korean Society of Mechanical Engineering, pp.110~112 (2015)