유동 중개륜에 의한 유성 기어의 하중 분담율
Load Sharing Rate of Planetary Gearing Systems by Using Floating Intermediate Rings
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The planetary gearing system is compact and lightweight. The performance of planetary gearing system which uses floating intermediate rings have been found to be very good for practical systems. To apply this system for the reduction of rotation of an engine, in designing stage, the quantitative estimate of the load sharing factors is required for understanding the performance. The method widely used for this purpose is to make use of elastic deformation of components of the structure or to utilize hydrodynamic oil film. This paper shows the way how to analyze the static load sharing factors by using the coefficient ''. This method can be applied for non-linear systems such as oil film bearing. The influences of various factors on '' of oil film spring are also shown. Furthermore, It is established in this study that the use of floating intermediate ring in designing the planetary gearing system has a very high reliability.
Abstract
The planetary gearing system is compact and lightweight. The performance of planetary gearing system which uses floating intermediate rings have been found to be very good for practical systems. To apply this system for the reduction of rotation of an engine, in designing stage, the quantitative estimate of the load sharing factors is required for understanding the performance. The method widely used for this purpose is to make use of elastic deformation of components of the structure or to utilize hydrodynamic oil film. This paper shows the way how to analyze the static load sharing factors by using the coefficient ''. This method can be applied for non-linear systems such as oil film bearing. The influences of various factors on '' of oil film spring are also shown. Furthermore, It is established in this study that the use of floating intermediate ring in designing the planetary gearing system has a very high reliability.
참고문헌 (10)
- 조인성, "유성 기어 유동 중개륜의 컴플라이언스 해석", 한국윤활학회지, 29(6), pp.378~385 (2013), 한국윤활학회[DOI]
- 김진택, "수직축 소형풍력발전기의 허브 구조 변경에 관한 연구", 한국기계기술학회지, 15(6), pp.987~992 (2013), 한국기계기술학회
- 윤영길, "토크컨버터 댐퍼 스프링의 강성 변화가 동적히스테리시스에 미치는 영향", 한국기계기술학회지, 17(1), pp.45~50 (2015), 한국기계기술학회[DOI]
- Y. H. Kim, "Analysis of the dynamic characteristics of a passenger car automatic transmission", Trans. Korean Soc. Automot. Eng, 5(3), pp.172~181 (1997)
- Y. S. Hong, "A study on the transmission error of a star type epicyclic gear train", Trans. Korean Soc. Automot. Eng, 7(5), pp.206~212 (1999)
- 천길정, "가공오차 및 조립오차가 유성기어열의 종특성에 미치는 영향", 대한기계학회논문집 A, 27(9), pp.1597~1606 (2003), 대한기계학회
- 천길정, "링기어의 경계조건이 가공오차를 가지는 유성기어열의 정특성에 미치는 영향", 대한기계학회논문집 A, 27(11), pp.1949~1957 (2003), 대한기계학회
- A. Bodas, "Influence of carrier and gear manufacturing errors on the static load sharing behavior of planetary gear sets", JSME Int. J., Ser. C, 47(3), pp.908~915 (2004)
- 박진환, "풍력발전기 요 브레이크 시스템의 설계", 한국윤활학회지, 27(4), pp.204~208 (2011), 한국윤활학회
- 김영진, "풍력발전기용 피치베어링의 하중분배, 접촉 및 피로수명 해석", 한국윤활학회지, 29(1), pp.33~38 (2013), 한국윤활학회[DOI]