CFD를 이용한 특수 목적 차량용 Wavy 핀 열교환기 성능에 관한 연구
A Study on the Performance of Wavy Fin Heat Exchangers for the Special Purpose Vehicle using CFD analysis
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The wavy fins have been widely used on the compact heat exchangers in aero system, automotive, air-conditioner and cooler system. The Special Purpose Vehicle has many oil used system and it need coolingsystem by air in form of fin-flat tube heat exchanger. The objective of this work is to evaluate the performance of wavy fin by Computational Fluid Dynamics(CFD) analysis. 3 modified models were suggested to change protrude direction or to remove blocked surface bot and top of corrugated fin. The base model shows the lowest performance in pressure drop, and modified model 3 shows the highest performance in heat transfer rate. But, modified model 2 has the highest value in the Area goodness factor results, and modifiedmodel 3 has the highest value in the Volume goodness factor results.
Abstract
The wavy fins have been widely used on the compact heat exchangers in aero system, automotive, air-conditioner and cooler system. The Special Purpose Vehicle has many oil used system and it need coolingsystem by air in form of fin-flat tube heat exchanger. The objective of this work is to evaluate the performance of wavy fin by Computational Fluid Dynamics(CFD) analysis. 3 modified models were suggested to change protrude direction or to remove blocked surface bot and top of corrugated fin. The base model shows the lowest performance in pressure drop, and modified model 3 shows the highest performance in heat transfer rate. But, modified model 2 has the highest value in the Area goodness factor results, and modifiedmodel 3 has the highest value in the Volume goodness factor results.
참고문헌 (5)
- H.Y. Lim, "Study on Frosting Phenomenon of a Heat Pump System for Vehicle with Louvered Fin-Flat Tube Type Exterior Heat Exchanger", pp.755~761 (2013)
- Y.J. Chang, "A gemeralized heat transfer correlation for louver fin geometry", International Journal of Heat and Mass Transfer, 40(3), pp.533~544 (1997)[DOI]
- 차선환, "자동차용 루버핀 열교환기의 열전달 및 유동 특성에 관한 수치해석", 한국기계기술학회지, 18(1), pp.18~23 (2016), 한국기계기술학회[DOI]
- 오영민, "루버 각도에 따른 차량용 루버핀 열교환기의 성능에 대한 3차원 수치 해석", 한국기계기술학회지, 19(2), pp.235~241 (2017), 한국기계기술학회[DOI]
- R.K. Shah, "Laminar Flow Forced Convection in Ducts" (1978), Academic Press