LDV를 이용한 토크컨버터 내 유동의 실험적 분석
Experimental Analyses of Flow in a Production Torque Converter Using LDV
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
LDV(laser Doppler velocimetry) measurements were conducted on the exit region of the impeller passage and the gap between the impeller and turbine blades under 0.8 speed ratio. The 0.8 speed ratio has an impeller speed of 2000rpm and a turbine speed of 1600rpm. A periodic variation of the mass flow rate is present in many of the measurements made. The frequency of this variation is the same as the frequency of the turbine blades passing the impeller passage exit. It is found that the instantaneous position of the turbine had effect on fluid flow inside the impeller passage and gap region. This study would aid in the construction of higher accuracy CFD models of this complex turbomachinery device.
Abstract
LDV(laser Doppler velocimetry) measurements were conducted on the exit region of the impeller passage and the gap between the impeller and turbine blades under 0.8 speed ratio. The 0.8 speed ratio has an impeller speed of 2000rpm and a turbine speed of 1600rpm. A periodic variation of the mass flow rate is present in many of the measurements made. The frequency of this variation is the same as the frequency of the turbine blades passing the impeller passage exit. It is found that the instantaneous position of the turbine had effect on fluid flow inside the impeller passage and gap region. This study would aid in the construction of higher accuracy CFD models of this complex turbomachinery device.
참고문헌 (12)
- W. Fister, "Experimental Researches of Flow in Hydrodynamic Torque Converters", Proceeding of the 7th Conference of Fluid Machinery in Budapest, 1, pp.210~224 (1983)
- Technology Needs for the Automotive Torque Converter-Part I : Internal Flow, Blade Design, and Performance, "R. R. By", SAE, ~, pp.SAE Paper No. 880482 (1988)
- Laser Velocimetry Measurements in the Stator of a Torque Converter, "H. M. Bahr", SAE, ~, pp.SAE Paper No. 901769 (1990)
- R. R. By, "Measurement and Analysis of Static Pressure Field in a Torque Converter Pump", Journal of Fluids Engineering, 117, pp.109~115 (1995)
- J. K. Gruver, "Laser Velocimeter Measurements on the pump of an Automotive Torque Converter-Part I : Average Measurements", Transactions of the ASME, 118, pp.562~569 (1996)
- Measurements of Flows in the Impeller and Turbine Side of an Automotive Torque Converter at 0. 4 and 0. 8 Speed Ratio, "L. Dalimonte", Michigan State University, ~ (1998)
- A Quantitative Study of Primary Flow Fields within an Automotive Torque Converter Using Laser Doppler Velocimetry, "M. Foster", Michigan State University, ~ (1998)
- B. Lakshminarayna, "Perspective : Fluid Dynamics and Performance of Automotive Torque Converters : An Assessment", Journal of Fluids Engineering, 118, pp.665~676 (1996)
- J. K. Gruver, "Laser Velocimeter Measurements on the pump of an Automotive Torque Converter-Part II : Unsteady Measurements", Transactions of the ASME, 118, pp.570~577 (1996)
- Quantification of Primary Flows of a Torque Converter Using Laser Doppler Velocimetry, "K. Lee", SAE, ~, pp.SAE Paper No. 2000-05-0106 (2000)
- 유성출, "Intake System이 Four-valve SI 기관 연소실 내 난류 운동에너지에 미치는 영향", 한국기계기술학회지, 19(6), pp.771~777 (2017), 한국기계기술학회[DOI]
- 유성출, "실린더 내 유동해석에 레이저 기반 유동 진단기술 적용을 위한 실험용 Four-valve SI 기관의 설계 및 제작기술 개발", 한국기계기술학회지, 20(3), pp.377~382 (2018), 한국기계기술학회[DOI]