디바이더를 장착한 세단 자동차의 리어 디퓨저 주위의 유동해석
Flow Analysis of Sedan Car with a Divider around the Rear Diffuser
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study was performed to analyze the effect on driving performance by identifying the flow characteristics of the rear diffuser such as drag coefficient, lift coefficient, velocity vector, velocity streamlines, turbulence kinetic energy and vortex-core region according to the angle of the sedan rear diffuser and the shape of the divider. The angle of the diffuser was analyzed at 2° intervals from 0° to 18°, and the divider was analyzed by changing from one to five. The three-dimensional modeling was performed using CATIA V5 and the vehicle model was selected as a sedan car in the form of an LF Sonata. The CFD analysis was performed in order to identify the flow characteristics of rear diffuser using ANSYS CFX 14.5.7. For each model, the analysis was performed under each condition with speeds of 80km/h, 100km/h, 120km/h, 140km/h. The results of the flow analysis showed that the rear diffuser angle was the best result in driving stability at 6°. The results of the study on the number of dividers showed the best result value in driving stability when the rear diffuser angle was 6° and the divider was 3 and selected as the optimal shape.
Abstract
This study was performed to analyze the effect on driving performance by identifying the flow characteristics of the rear diffuser such as drag coefficient, lift coefficient, velocity vector, velocity streamlines, turbulence kinetic energy and vortex-core region according to the angle of the sedan rear diffuser and the shape of the divider. The angle of the diffuser was analyzed at 2° intervals from 0° to 18°, and the divider was analyzed by changing from one to five. The three-dimensional modeling was performed using CATIA V5 and the vehicle model was selected as a sedan car in the form of an LF Sonata. The CFD analysis was performed in order to identify the flow characteristics of rear diffuser using ANSYS CFX 14.5.7. For each model, the analysis was performed under each condition with speeds of 80km/h, 100km/h, 120km/h, 140km/h. The results of the flow analysis showed that the rear diffuser angle was the best result in driving stability at 6°. The results of the study on the number of dividers showed the best result value in driving stability when the rear diffuser angle was 6° and the divider was 3 and selected as the optimal shape.
참고문헌 (12)
- S. Dipak, "Aerodynamics Analysis of Passenger Vehicle using CFD Modelling", International Conference on Ideas, Impact Innovation in Mechanical Engineering, 5(6), pp.833~839 (2017)
- R. Ajay, "Methods of Improving Aerodynamics of a Vehicle - A Review", International Journal of Trend in Scientific Research and Development, 2(4), pp.2141~2146 (2018)
- Xingjun Hu, "Influence of Different Diffuser Angle on Sedan’s Aerodynamic Characteristics", International Conference on Physics Science and Technology(ICPST 2011), Physics Procedia, 22, pp.239~245 (2011)
- A. Anish, "Modelling and Analysis of a Car for Reducing Aerodynamic Forces", International Journal of Engineering Trends and Technology, 47(1), pp.239~245 (2017)
- M. Jesper, "Under-body and Diffuser Flows of Passenger Vehicles", Department of Applied Mechanics, Chalmers University of Technology, ~ (2013)
- 이교우, "자동차의 주행 성능에 미치는 리어 디퓨저 크기의 영향", 한국산학기술학회논문지, 20(2), pp.655~661 (2019), 한국산학기술학회[DOI]
- S. M. Hassan, "Numerical Study on the Aerodynamic Drag Reduction of Racing Cars", 10th International Conference on the Mechanical Engineering, ICME 2013, Procedia Engineering, 90, pp.308~313 (2013)
- ANSYS Inc, "ANSYS CFX User Manual Version 14.5", ~ (2014)
- K. Shashi, "A Review on CFD Analysis of Drag Reduction of a Generic Sedan and Hatchback", International Research Journal of Engineering and Technology, 4(5), pp.239~245 (2017)
- S. S. Shivaji, "Enhancement of Aerodynamic Drag Reduction of Passenger Vehicle using CFD Analysis-Review", International Journal of Innovative Research in Science, Engineering and Technology, 6(1), pp.239~245 (2017)
- P. Akshay, "Aerodynamic Analysis of a car Model using Fluent–ANSYS 14.5", International Journal on Research Technologies in the Mechanical and Electrical Engineering, 1(4), pp.7~13 (2014)
- J. S. Na, "Optimized Blade of Small Vertical Axis Wind Turbine and Vortex Strucure Analysis", Journal of Visualization of Korea, 13(1), pp.15~20 (2015)