1톤 트럭 후륜 에어 서스펜션 모듈 개발에 관한 연구
A Study on the Development of 1Ton Truck Rear Air Suspension Module
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In order to develop a 1 ton truck rear wheel air suspension module, this study designed and manufactured a Z-type spring and air suspension module test jig to optimize the design and reliability of the Z-type spring and vibration-free air suspension module, which are core parts, and to secure the reliability of the developed parts. We were able to achieve the technology development goal of this thesis by making a prototype and conducting a test evaluation at an external test and research institute to perform the vibration endurance test aimed in this study.
Abstract
In order to develop a 1 ton truck rear wheel air suspension module, this study designed and manufactured a Z-type spring and air suspension module test jig to optimize the design and reliability of the Z-type spring and vibration-free air suspension module, which are core parts, and to secure the reliability of the developed parts. We were able to achieve the technology development goal of this thesis by making a prototype and conducting a test evaluation at an external test and research institute to perform the vibration endurance test aimed in this study.
참고문헌 (8)
- 서재영, "적재 하중에 대한 Z형 스프링의 구조강도 평가", 한국기계기술학회지, 22(5), pp.809~813 (2020), 한국기계기술학회[DOI]
- K. C. Lim, "Frame member structure analysis for light truck weight", KSMTE Annual Spring Conference, pp.182~ (2017)
- S. H. Kwon, "Reliability Analysis of Fatigue Life for Truck Frame FE Model", KSME Annual Autumn Conference, 11, pp.1026~1031 (2010)
- V. Rahul, "Structural analysis of Pick-Up Truck Chassis using Fem", International Journal of ChemTech Research, 9(6), pp.384~391 (2016)
- J. J. Yun, "The Development of Cowl-Cross Member parts by High Strength Steel", KSME, Annual Spring Conference, 5, pp.307~308 (2013)
- E. P. Kwon, "Development of lightweight AHSS cross member", 2016 KSAE Annual Spring Conference, 5, pp.904~904 (2016)
- M. S. Lee, "Study on the structural prpperties for the shape of special equiied vehicles cross member", KSME Annual Spring Conference, 5, pp.110~112 (2015)
- G. M. Lee, "Structural analysis of the high stiffness cross member for commercial vehicle", 2015 KSAE General Conference, 5, pp.463~463 (2015)