pH 완충 용액 환경에서 기가급 강도의 강철과 열 영향부에서 발생하는 피로균열 전파에 대한 부식 영향 연구
Study of Corrosion Effect on Fatigue Crack Propagation in Giga-Strength Steel and Heat Affected Zone in pH Buffer Environment
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, corrosion fatigue crack propagation was investigated in pH buffer environment using the giga strength steel and its heat-affected zone, and the results were compared with theoretical model prediction. Also, the pure corrosion effect on fatigue crack propagation in a corrosive environment was compared with the modified Forman equation. As results, the average value of corrosion rate obtained as the ratio of the net corrosion-induced crack length to the total crack length under cyclic loading in the base metal and heat-affected zone under experimental loading conditions. These results exhibit a new theoretical method for corrosion fatigue crack propagation that predicts a purely corrosion effect on the behavior to be determined.
Abstract
In this study, corrosion fatigue crack propagation was investigated in pH buffer environment using the giga strength steel and its heat-affected zone, and the results were compared with theoretical model prediction. Also, the pure corrosion effect on fatigue crack propagation in a corrosive environment was compared with the modified Forman equation. As results, the average value of corrosion rate obtained as the ratio of the net corrosion-induced crack length to the total crack length under cyclic loading in the base metal and heat-affected zone under experimental loading conditions. These results exhibit a new theoretical method for corrosion fatigue crack propagation that predicts a purely corrosion effect on the behavior to be determined.
참고문헌 (9)
- J. O. Moon, "Development Trend of Advanced Automotive Steels", Auto Journal, 39(6), pp.22~26 (2017)
- J, S. Noh, "Effect of nitric acid passivation on the pitting resistance of 316 stainless steel", Corr. Sci, 42, pp.2069~2084 (2000)
- A. Adebayo, "Corrosion inhibition of alkaline solution on low carbon steel in local water(Okun river)", Int. J. Sci. Tech. Research in Eng, 14(2), pp.79~91 (2019)
- R. Wang, "A fracture model of corrosion fatigue crack propagation of aluminum alloys based on the material elements fracture ahead of a crack tip", Int. J. Fatigue, 30(8), pp.1376~1386 (2008)
- J. Ruiz, "Environmental fatigue in a 7000 series aluminium alloy", Corros. Sci, 38(10), pp.1815~1837 (1996)
- X. Zheng, "Fatigue crack propagation in steels", Eng. Fract. Mech, 18(5), pp.965~973 (1983)
- K. Easterling, "Introduction to the Physical Metallurgy of Welding" (1983), Butterworth
- G. Hénaff, "Environmental influence on the near-threshold fatigue crack propagation behaviour of a high-strength steel", Int. J. Fatigue, 14(4), pp.211~218 (1992)
- F. Ellyin, "Effect of hydride precipitation on the elastoplastic stress field near a crack tip", Acta Metall. Mater, 42, pp.2709~2717 (1994)