CFRP 일방향 45도 배향각 프리프레그의 회전수 변화에 따른 HSS, TiAIN 드릴 절삭에 관한 연구
A study on HSS, TiAIN drill cutting according to the change in rotation speed of CFRP unidirectional 45 degree orientation angle prepreg
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Prepreg is an abbreviation of Preimpregnated Materials. It is a sheet-type product in which a matrix is impregnated with reinforced fiber. The prepreg has very different properties depending on the orientation of the fibers and the weaving method, and the orientation of the fibers plays an important role in determining the mechanical strength of CFRP. Short and randomly oriented reinforcing fibers show isotropy, while long, unidirectional reinforcing fibers exhibit anisotropic behavior and are strongest when the applied load is parallel to the reinforcing fibers. Classification by the direction of the fiber is divided into unidirectional, orthogonal, multiaxial, and the like. Uni-directional refers to a state in which almost all fibers in the fabric are aligned in one direction. When the fibers used as reinforcing materials are aligned in one direction, the fibers are used in a straight line without twisting during the fabric production process, and there is an advantage in that the amount of fibers used as a whole can be minimized. A uni-directional prepreg exhibits different cutting forces depending on the stacking orientation angle. In this experiment, the optimal cutting conditions for a uni-directional prepreg 45 degree orientation angle specimen are presented.
Abstract
Prepreg is an abbreviation of Preimpregnated Materials. It is a sheet-type product in which a matrix is impregnated with reinforced fiber. The prepreg has very different properties depending on the orientation of the fibers and the weaving method, and the orientation of the fibers plays an important role in determining the mechanical strength of CFRP. Short and randomly oriented reinforcing fibers show isotropy, while long, unidirectional reinforcing fibers exhibit anisotropic behavior and are strongest when the applied load is parallel to the reinforcing fibers. Classification by the direction of the fiber is divided into unidirectional, orthogonal, multiaxial, and the like. Uni-directional refers to a state in which almost all fibers in the fabric are aligned in one direction. When the fibers used as reinforcing materials are aligned in one direction, the fibers are used in a straight line without twisting during the fabric production process, and there is an advantage in that the amount of fibers used as a whole can be minimized. A uni-directional prepreg exhibits different cutting forces depending on the stacking orientation angle. In this experiment, the optimal cutting conditions for a uni-directional prepreg 45 degree orientation angle specimen are presented.
참고문헌 (6)
- 정성택, "CFRP복합재료의 적층수와 드릴직경에 관한 연구", 한국생산제조학회지, 12(6), pp.8~13 (2003), 한국생산제조학회
- Jcantwell, W. J., "Residual Strength Assessment of Impact Damaged RP Laminates", Proceeding of Int. Conf.Post-Failure Analysis of FIBER Reinforced Composites, 3, pp.241~257 (1985)
- Ferreira, J. R., "Machining Optimization in Carbon Fiber Reinforced Composite Materials", J. of MPT, 92, pp.135~140 (1999)
- Park. J. N., "A Study on the Cutting Characteristics of the Fiber Reinforced Plastics by Drill Tools", KSPE, 2002추계논문집, pp.180~185 (2002)
- Jeong. S. T., "A Study on the Drilling of Composites laminates with respect to Stacking sequences", KSMTE, 2002추계논문집, pp.180~185 (2002)
- Oxford. C. J., "On the drilling of metal", ~