Cohesive Zone Model과 1-way 유체-구조 상호작용 해석을 이용한 폐이차전지 전극재 분리 시뮬레이션
Simulation of Separation of Electrode Materials from Waste Secondary Battery using CZM and 1-way FSI Analysis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The waste secondary battery contains a significant amount of valuable metals, making its recycling highly desirable. However, conventional chemical methods for recycling are environmentally unfriendly and cost-ineffective. Rather than the chemical method, this paper deals with a mechanical method for recovering electrode materials from waste secondary batteries by blowing pressurized air onto the interface area between the electrode and the separator. Especially, in this study, the effective blowing angle were searched by simulating the separation of the electrode material from the separator through 1-way fluid structure interaction analysis based on the Cohesive Zone Modeling technique.
Abstract
The waste secondary battery contains a significant amount of valuable metals, making its recycling highly desirable. However, conventional chemical methods for recycling are environmentally unfriendly and cost-ineffective. Rather than the chemical method, this paper deals with a mechanical method for recovering electrode materials from waste secondary batteries by blowing pressurized air onto the interface area between the electrode and the separator. Especially, in this study, the effective blowing angle were searched by simulating the separation of the electrode material from the separator through 1-way fluid structure interaction analysis based on the Cohesive Zone Modeling technique.
참고문헌 (11)
- Jiwoo Jung, "Recycling and Reuse of Waste Batteries from Electric Vehicles： A review", Journal of Korean Society of Environmental Engineers, 45(7), pp.325~335 (2023)
- Jin Suk Han, "Disposal of Waste Batteries for Electric Vehicles(l. Recycling)", Journal of the Korean Battery Society, 2(2), pp.135~146 (2022)
- EFC Inc, "Equipment and method for dismantling power battery. Korean Patent, 0133644", ~ (2022)
- "Z-folding, a technique that ensure the safety of SK Innovation's batteries" (2021)[URL]
- C. A. Felippa, "Staggered transient analysis procedures for coupled mechanical systems : formulation", Computer Methods in Applied Mechanics and Engineering, 24(1), pp.61~111 (1980)
- ANSYS Inc, "ANSYS Fluent Users Guide", ANSYS Inc, ~ (2012)
- Mohammadi B., "Analysis of the K-epsilon turbulence model" (1994), Wiley Masson
- O. C. Zienkiewicz, "The Finite Element Method, vol. 1" (2000), Butterworth- Heinemann
- You Sub Kim, "Evaluation of Peeling Property of Polyisoprene-Based Pressure Sensitive Adhesive", Polymer(Korea), 43(1), pp.1~9 (2019)
- Gustafson P. A., "The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints", Int J. Solids Struct, (46), pp.2201~2215 (2009)
- ANSYS Inc, "ANSYS Mechanical APDL Theory Reference ver. 17.2", ~ (2016)