LNG C-type Tank 내부 천연가스의 안전 배출조건에 대한 가이드 라인 제시를 위한 수치해석적 연구
A Numerical Study on Suggesting Guidelines for Safe Venting Conditions of Natural Gas in LNG C-type Tank
3
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
LNG propulsion ships are actively being built as an eco-friendly fuel for ships, and ships with C-type LNG tanks are being widely built. In order to analyze the risk of LNG venting from operating ships and test-run ships, the flow characteristics according to operating conditions were reviewed using ANSYS FLUENT, a computational fluid dynamics (CFD) software. As a result of the study, it was confirmed that the distribution area exceeding the lower explosion limit of natural gas and the area where the natural gas temperature rose to 17 ° C had similarities. In addition, it was confirmed that the change in the horizontal direction was greater than the change in the vertical direction when the natural gas distribution range was changed. Since the valve opening has a greater effect than the tank pressure, if natural gas must be vented to the atmosphere inevitably, the risk can be reduced by operating the valve opening at 50% or less.
Abstract
LNG propulsion ships are actively being built as an eco-friendly fuel for ships, and ships with C-type LNG tanks are being widely built. In order to analyze the risk of LNG venting from operating ships and test-run ships, the flow characteristics according to operating conditions were reviewed using ANSYS FLUENT, a computational fluid dynamics (CFD) software. As a result of the study, it was confirmed that the distribution area exceeding the lower explosion limit of natural gas and the area where the natural gas temperature rose to 17 ° C had similarities. In addition, it was confirmed that the change in the horizontal direction was greater than the change in the vertical direction when the natural gas distribution range was changed. Since the valve opening has a greater effect than the tank pressure, if natural gas must be vented to the atmosphere inevitably, the risk can be reduced by operating the valve opening at 50% or less.
참고문헌 (8)
- 길상철, "LNG저장과 수송설비의 최신용접기술", 한국마린엔지니어링학회지, 40(1), pp.17~27 (2016), 한국마린엔지니어링학회[DOI]
- H. K. Kang, "A Study of Compatibility for the Minimum Height of Vent Exits in Membrane Type LNG Ship", 한국마린엔지니어링학회 학술대회 논문집, pp.259~261 (2009)
- W. R. Lee, "Design Validation of HP Vent Mast for LNG Carrier", 대한기계학회 춘추학술대회, pp.339~341 (2015)
- 강우제, "축류 팬 허브의 홀 형상 최적화를 통한 모터 열 해석 및 유동특성에 대한 수치해석적 연구", 한국유체기계학회 논문집, 22(1), pp.19~26 (2019), 한국유체기계학회[DOI]
- 박수현, "슬로싱 유동에 대한 2유체 방법과 VOF 방법의 비교 연구", 대한기계학회논문집 B, 44(12), pp.711~716 (2020), 대한기계학회
- J. H. Lee, "NUMERICAL ANALYSIS FOR SIPHON BREAKER USING VOF METHOD", 한국전산유체공학회 학술대회논문집, pp.166~167 (2017)
- 하태웅, "밀폐공간 및 강제환기공간에의 천연가스 고압분출 시 농도 확산분포 거동해석 (I)", 한국가스학회지, 16(4), pp.23~31 (2012), 한국가스학회[DOI]
- Y.S. Im, "Understanding ENVIRONMENTALLY –FRIENDLY SHIPS" (2023), Sungandang