셀프 레벨라이저에서 로드의 하중 변화에 따른 구조적 안정성에 대한 연구
A Study on the Structural Stability According to Load Variation of Rod in Self-Levelizer
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In a self-level riser, the piston rod generates hydraulic pressure while reciprocating along the pump rod, so components such as rods and valves require precise processing technology. Among them, the design of the pump rod was changed to a spiral groove method because there was a risk of poor operation during eccentricity. In this paper, the design and 3D modeling of the pump rod were conducted, and the structural stability of the core part according to the load change applied to the pump rod was confirmed.
Abstract
In a self-level riser, the piston rod generates hydraulic pressure while reciprocating along the pump rod, so components such as rods and valves require precise processing technology. Among them, the design of the pump rod was changed to a spiral groove method because there was a risk of poor operation during eccentricity. In this paper, the design and 3D modeling of the pump rod were conducted, and the structural stability of the core part according to the load change applied to the pump rod was confirmed.
참고문헌 (6)
- 조재웅, "자동차 현가장치의 구조 강도 해석", 한국생산제조학회지, 19(1), pp.89~93 (2010), 한국생산제조학회
- 이상범, "전복 안정성을 고려한 SUV 현가장치 파라미터의 최적설계", 한국생산제조학회지, 18(4), pp.410~416 (2009), 한국생산제조학회
- 유승현, "쇼크 업소버 피스톤로드에 경질크롬코팅을 위한 백금티타늄양극의 구조 설계 및 해석", 한국기계기술학회지, 22(3), pp.597~602 (2020), 한국기계기술학회[DOI]
- J. W. Park, "Mount Design of Shock Absorber for Reducing Vehicle Noise", 2(2), pp.187~193 (2000)
- 한문식, "자동차의 쇽업쇼바 마운트에 대한 구조 및 피로해석", 한국기계가공학회지, 11(1), pp.125~133 (2012), 한국기계가공학회
- 하정수, "에어 서스펜션 시트의 구조 및 진동해석에 관한 연구", 한국기계가공학회지, 16(6), pp.47~54 (2017), 한국기계가공학회[DOI]