소형 유압실린더 개발을 위한 전산해석적 연구
Computational Analysis for the Development of Compact Hydraulic Cylinders
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Hydraulic cylinders are hydraulic system parts widely used in various industries such as construction machinery, machine tools, robots, automobiles, and automation systems. The maximum capacity of vane pumps used in machine tools is 70bar, but the actual operating pressure is less than 50bar. The allowable pressure of a commercial hydraulic cylinder is 140 - 210 bar, so it is heavy and uneconomical because it uses thick and strong materials. In this paper, we intend to develop a small and lightweight hydraulic cylinder suitable for the allowable pressure of 50bar or less so that it can be used in the hydraulic system field. In order to develop a compact hydraulic cylinder, flow analysis, and structural analysis were conducted under piston forward and backward conditions. The analyzed flow rate value was calculated to be suitable for the operation of the hydraulic cylinder. As a result of comparing the stress calculated under the forward/backward condition of the piston with the yield stress of the material, the safety factor was calculated to be more than 2.5.
Abstract
Hydraulic cylinders are hydraulic system parts widely used in various industries such as construction machinery, machine tools, robots, automobiles, and automation systems. The maximum capacity of vane pumps used in machine tools is 70bar, but the actual operating pressure is less than 50bar. The allowable pressure of a commercial hydraulic cylinder is 140 - 210 bar, so it is heavy and uneconomical because it uses thick and strong materials. In this paper, we intend to develop a small and lightweight hydraulic cylinder suitable for the allowable pressure of 50bar or less so that it can be used in the hydraulic system field. In order to develop a compact hydraulic cylinder, flow analysis, and structural analysis were conducted under piston forward and backward conditions. The analyzed flow rate value was calculated to be suitable for the operation of the hydraulic cylinder. As a result of comparing the stress calculated under the forward/backward condition of the piston with the yield stress of the material, the safety factor was calculated to be more than 2.5.
참고문헌 (18)
- 김성현, "유압 브레이커의 충격량 예측을 위한 모델링과 해석", 한국산학기술학회논문지, 20(2), pp.741~749 (2019), 한국산학기술학회[DOI]
- S. -H. Kim, "Comparative Analysis of Machine Learning Approaches to Predict Impact Energy of Hydraulic Breakers", Processes, 11(3), pp.772~ (2023)
- Sung-Hyun Kim, "Functional data analysis for assessing the fatigue life of construction equipment attachments", Journal of Mechanical Science and Technology, 35(2), pp.495~506 (2021), 대한기계학회[DOI]
- 김성현, "필드 데이터를 활용한 진동 해머 구조물의 수명예측에 관한 연구", 대한기계학회논문집 A, 43(11), pp.811~820 (2019), 대한기계학회
- S. -H. Kim, "Study of rod-eye strain characteristics of hydraulic cylinder", 138(141), pp.138~141 (2019)
- 신정훈, "NSWC 를 활용한 유공압 액추에이터 U 형 씰의 수명예측", 대한기계학회논문집 A, 38(12), pp.1379~1385 (2014), 대한기계학회
- J. Jeon, "A study on the Development of Smart Hydraulic Cylinder for Off-highway Equipment through Embedded Magnetostrictive Position Sensor Design", Ph.D., pp.2018
- 오재경, "가변형 베인펌프의 성능특성에 관한 해석적 연구", 석사, 기계공학과, pp.2014
- 딩광청, "Analysis of the Mathematical Model of a Variable Displacement Vane Pump for Engine Lubrication", 드라이브·컨트롤, 11(1), pp.14~24 (2014), 사단법인 유공압건설기계학회[DOI]
- 김철수, "자동변속기용 가변 용량 베인 펌프의 파워 절감 효과평가에 대한 실험적 연구", 한국자동차공학회 논문집, 22(7), pp.1~7 (2014), 한국자동차공학회[DOI]
- 박철우, "The Development of Aluminum Alloy Piston for Two-Stroke Cycle Engine by Powder Forging", 한국생산제조학회지, 22(1), pp.173~177 (2013), 한국생산제조학회[DOI]
- S. S. Kumaran, "High temperature sliding wear behavior of Al 4032-ZrB2 in situ composite", International Journal of Materials Science, 4(3), pp.283~298 (2009)
- J. P. Schaffer, "The Science and Design of Engineering Materials", pp.2000, WCB
- B. Bhushan, "Principles and applications of tribology" (1999), John Wiley & Sons
- "Compact type hydraulic cylinders", Korean Agency for technology and standards, ~ (2008)
- "Hydraulic cylinder for cargo cranes", Korean Agency for technology and standards, ~ (2008)
- P. J. Gamez-Montero, "Misalignment effects on the load capacity of a hydraulic cylinder", International Journal of Mechanical Sciences, 51(2), pp.105~113 (2009)
- J. P. Vidosic, "Machine design projects" (1957), Ronald Press Company