단방향 형상기억합금 기반 소형 브레이크 시스템 개발
Development of a Compact Brake System Based on One-way Shape Memory Alloy
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Tendon-driven mechanisms have gained prominence in a range of applications, including soft robots, exoskeletons, and prosthetic devices. These mechanism use flexible tendons or cables to transmit force and control joint movement. As the popularity of these mechanisms grows, there is an increasing demand for solutions to enhance stability and safety. The use of brakes is a well-known solution, but existing models are difficult to customize for small soft robots. In this paper, we present a one-way shape memory alloy-based compact brake for tendon-driven mechanisms. The proposed soft brake featured a thin design and was tailored for seamless integration within a tendon-driven mechanism. In addition, the use of the one-way shape memory alloys enabled the design of the brakes that are both compact and powerful. This brake is expected to be widely used in miniaturized tendon-driven robots.
Abstract
Tendon-driven mechanisms have gained prominence in a range of applications, including soft robots, exoskeletons, and prosthetic devices. These mechanism use flexible tendons or cables to transmit force and control joint movement. As the popularity of these mechanisms grows, there is an increasing demand for solutions to enhance stability and safety. The use of brakes is a well-known solution, but existing models are difficult to customize for small soft robots. In this paper, we present a one-way shape memory alloy-based compact brake for tendon-driven mechanisms. The proposed soft brake featured a thin design and was tailored for seamless integration within a tendon-driven mechanism. In addition, the use of the one-way shape memory alloys enabled the design of the brakes that are both compact and powerful. This brake is expected to be widely used in miniaturized tendon-driven robots.
참고문헌 (10)
- Y. Zhang, "Bioinspired soft robotic fingers with sequential motion based on tendon-driven mechanisms", Soft Robot, 9(3), pp.531~541 (2022)
- D. H. Kim, "Bioinspired high-degrees of freedom soft robotic glove for restoring versatile and comfortable manipulation", Soft Robot, 9(4), pp.734~744 (2022)
- L. Liow, "Olympic : A modular, tendon-driven prosthetic hand with novel finger and wrist coupling mechanisms", IEEE Robot. Autom. Lett, 5(2), pp.299~306 (2019)
- J. L. Pons et al., "The MANUS-HAND dextrous robotics upper limb prosthesis : mechanical and manipulation aspects", Auton. Robots, 16, pp.143~163 (2004)
- H. In, "Capstan brake: Passive brake for tendon-driven mechanism", IEEE Int. Conf. Intell. Robot. Syst, pp.2301~2306 (2012)
- 배희은, "이중 소재를 갖는 브레이크 디스크의 제동 성능에 관한 연구", 한국기계기술학회지, 20(3), pp.300~305 (2018), 한국기계기술학회[DOI]
- 고석조, "로봇암의 경량화를 위한 중공형 서보 조립체 개발 및 적용", 한국기계기술학회지, 11(2), pp.45~50 (2009), 한국기계기술학회[DOI]
- R. Hinchet, "Dextres : Wearable haptic feedback for grasping in VR via a thin form-factor electrostatic brake", UIST 2018 - Proc. 31st Annu. ACM Symp. User Interface Softw. Technol, pp.901~912 (2018)
- I. Choi, "A Soft, Controllable, High Force Density Linear Brake Utilizing Layer Jamming", IEEE Robot. Autom. Lett, 3(1), pp.450~457 (2018)
- S. B. Diller, "The effects of electroadhesive clutch design parameters on performance characteristics", J. Intell. Mater. Syst. Struct, 29(19), pp.3804~3828 (2018)