텐던 구동 시스템의 마찰 모델 파라미터 추정
Parameter Estimation of a Friction Model for a Tendon-sheath Mechanism
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Mechanical systems using tendon-driven actuators have been widely used for bionic robot arms because not only the tendon based actuating system enables the design of robot arm to be very efficient, but also the system is very similar to the mechanism of the human body’s operation. The tendon-driven actuator, however, has a drawback caused by the friction force of the sheath. Controlling the system without considering the friction force between the sheath and the tendon could result in a failure to achieve the desired dynamic behaviors. In this study, a mathematical model was introduced to determine the friction force that is changed according to the geometrical pathway of the tendon-sheath, and the model parameters for the friction model were estimated by analyzing the data obtained from dedicated tests designed for evaluating the friction forces. Based on the results, it is possible to appropriately predict the friction force by using the information on the pathway of the tendon.
Abstract
Mechanical systems using tendon-driven actuators have been widely used for bionic robot arms because not only the tendon based actuating system enables the design of robot arm to be very efficient, but also the system is very similar to the mechanism of the human body’s operation. The tendon-driven actuator, however, has a drawback caused by the friction force of the sheath. Controlling the system without considering the friction force between the sheath and the tendon could result in a failure to achieve the desired dynamic behaviors. In this study, a mathematical model was introduced to determine the friction force that is changed according to the geometrical pathway of the tendon-sheath, and the model parameters for the friction model were estimated by analyzing the data obtained from dedicated tests designed for evaluating the friction forces. Based on the results, it is possible to appropriately predict the friction force by using the information on the pathway of the tendon.
참고문헌 (9)
- B. B. Kang, "Development of a polymer-based tendon-driven wearable robotic hand", 2016 IEEE International Conference on Robotics and Automation (ICRA), pp.3750~3755 (2016)
- Z. Li, "Kinematic comparison of surgical tendon-driven manipulators and concentric tube manipulators", Mechanism and Machine Theory, 107, pp.148~165 (2016)[DOI]
- C. C. de Wit, "A new model for control of systems with friction", IEEE Transactions on Automatic Control, 40(3), pp.419~425 (1995)[DOI]
- J. Swevers, "An integrated friction model structure with improved presliding behavior for accurate friction compensation", IEEE Transactions on Automatic Control, 45(4), pp.675~686 (2000)[DOI]
- J. H. Jung, "Generalized capstan problem : Bending rigidity, nonlinear friction, and extensibility effect", Tribology International, 41(6), pp.524~534 (2008)[DOI]
- Lingyuan Kong, "Mechanics and Sliding Friction in Belt Drives With Pulley Grooves", Journal of Mechanical Design, 128(2), pp.494~502 (2006), ASME International[DOI]
- B. Supriyo, "Electro-mechanical Transmission Ratio Shifter of Rubber Belt Continuously Variable Transmission for Motorcycle Applications", Journal of Physics : Conference Series, 1273(1) (2019)[DOI]
- T. N. Do, "A new approach of friction model for tendon-sheath actuated surgical systems : Nonlinear modelling and parameter identification", Mechanism and Machine Theory, 85, pp.14~24 (2017)[DOI]
- U. Jeong, "A novel low-cost, large curvature bend sensor based on a Bowden-cable", Sensors, 16(7), pp.961~ (2016)[DOI]