EMP 기술표준 동향 및 군용 RF 안테나 유입 EMP 신호 분석
Recent EMP Standards and Analysis of EMP Signal Coming into Military RF Antenna
4
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, the EMP-related standards and test methods used by the civilian and military have been introduced. The incoming EMP signal for seven military RF antennas which are the first to face EMP threats among military weapon systems have been also measured and analyzed. Overall, as the applied signal strength increased, the strength of the EMP signal entering in the antenna also showed an upward trend. The highest level of entering was observed at the peak value of the applied EMP signal, 50 kV/m. And at the peak value, all antennas received threatening signals. In particular, antennas in low frequency bands such as AM and FM were getting high voltage signals as high as thousands of volts. This means that the weapon systems linked to the antennas could suffer severe damage. Therefore, based on this paper, systematic research for EMP threat should be conducted to identify EMP vulnerabilities of major weapons systems and to devise practical protective measures.
Abstract
In this paper, the EMP-related standards and test methods used by the civilian and military have been introduced. The incoming EMP signal for seven military RF antennas which are the first to face EMP threats among military weapon systems have been also measured and analyzed. Overall, as the applied signal strength increased, the strength of the EMP signal entering in the antenna also showed an upward trend. The highest level of entering was observed at the peak value of the applied EMP signal, 50 kV/m. And at the peak value, all antennas received threatening signals. In particular, antennas in low frequency bands such as AM and FM were getting high voltage signals as high as thousands of volts. This means that the weapon systems linked to the antennas could suffer severe damage. Therefore, based on this paper, systematic research for EMP threat should be conducted to identify EMP vulnerabilities of major weapons systems and to devise practical protective measures.
참고문헌 (17)
- 북한의 화생무기, 전자기펄스(EMP), 사이버 위협 : 특성과 대응 방안, "브루스 W., 베넷", 아산정책연구원, ~ (2022)
- 이원길, "EMP 방호대책과 소요 기술", 전자파기술, 24(1), pp.79~96 (2013)[DOI]
- Woolsey R. J., "The growing threat from an EMP Attack", The Wall Street Journal, 1~3 (2014)
- 표창균, "EMP 방호설비 설계기준 현황과 시사점", 정보통신산업동향, 24, pp.12~22 (2018)[DOI]
- 최효식, "EMP 방호시설의 기술동향", 한국건축시공학회지, 16(3), pp.22~27 (2016)
- 진정희, "무기체계의 EMP 방호성능 검증을 위한 시험평가 방안연구", 국방품질연구논집(JDQS), 4(1), pp.46~50 (2022), 국방기술품질원[DOI]
- Edward Savage, "The early-time(E1)high-altitude electromagnetic pulse(HEMP)and its impact on the US power grid", Report Meta, Jan (2010)
- High altitude electromagnetic pulse(HEMP)and high power microwave(HPM)devices : Threat assessments, "Clay Wilson", Congressional Research Service, ~ (2008)
- 장태헌, "EMP 표준화 동향", 한국전자파학회지, 28(3), pp.11~18 (2017)
- "IEC 61000-4-23, Test methods for protective devices for HEMP and other radiated disturbances", ~ (2016)
- "IEC 61000-4-24, Test methods for protective devices for HEMP conducted disturbance", ~ (2015)
- "IEC 61000-4-25, HEMP immunity test methods for equipment and systems", ~ (2019)
- "IEC 61000-4-36, IEMI immunity test methods for equipment and systems", ~ (2020)
- "MIL-STD-461G, Requirement for the control of electromagnetic interference characteristics of subsystems and equipment", ~ (2015)
- "MIL-STD-464D, Electromagnetic environmental effects requirements for systems", ~ (2020)
- "MIL-STD-188-125-2, High-altitude electromagnetic pulse(HEMP) protection for ground- based C4I facilities performing critical, time- urgent missions", ~ (2005)
- Derivative time- domain sensor and fibre optic correction factor calculation, "Marc Sallin", montena, ~, pp.montena technology technical note-TN15