사이펀 노즐의 오리피스 직경변화에 따른 분무특성에 관한 연구
A Study on the Spray Characteristics According to the Orifice Diameter Change of Siphon Nozzle
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, we examined the effect of orifice diameter on atomization performance such as SMD(Sauter Mean Diameter), MMD(Mass median diameter), particle size distribution, spray distance, and spray angle when water was sprayed through a siphon nozzle. In addition, the behavior characteristics of spray were analyzed using the CFD(Computational Fluid Dynamics) commercial program. In the downstream direction of the flow, the dispersion and diffusion power of the droplets increased, greatly improving atomization performance. The spray spread in the radial direction when the jet velocity of water increased. As a result, atomization performance improved as the jet velocity increased.
Abstract
In this study, we examined the effect of orifice diameter on atomization performance such as SMD(Sauter Mean Diameter), MMD(Mass median diameter), particle size distribution, spray distance, and spray angle when water was sprayed through a siphon nozzle. In addition, the behavior characteristics of spray were analyzed using the CFD(Computational Fluid Dynamics) commercial program. In the downstream direction of the flow, the dispersion and diffusion power of the droplets increased, greatly improving atomization performance. The spray spread in the radial direction when the jet velocity of water increased. As a result, atomization performance improved as the jet velocity increased.
참고문헌 (7)
- 김형곤, "분리된 2개의 기체 주입 관을 갖는 기체 주입 미립화기의 미립화 특성", 한국기계기술학회지, 18(1), pp.30~35 (2016), 한국기계기술학회[DOI]
- 김형곤, "회전 분무장치에서 작동조건의 변화가 미립화 성능에 미치는 영향", 한국기계기술학회지, 21(3), pp.405~410 (2019), 한국기계기술학회[DOI]
- J. H. Kim, "Liquid Atomization and Spray Characteristics in Electrostatic Spray of Twin Fluids", Transactions of Korean Society of Mechanical Engineering B, 25(11), pp.1552~1560 (2001)
- 장성호, "단열식 오리피스를 적용한 고속회전 분무노즐의 미립화 특성", 한국분무공학회지, 14(3), pp.97~102 (2009), 한국분무공학회
- D. J. Cho, "An Experimental Study on the Spray Characteristics of the Pressure Swirl Atomizer", Journal of ilass-korea, 2(1), pp.46~51 (1997)
- 김범준, "가솔린 엔진용 2홀 2분류와 4홀 2분류 타입 인젝터의 액적 평균 직경의 동적 거동 비교", 한국분무공학회지, 11(1), pp.17~23 (2006), 한국분무공학회
- TSNE, "ANSYS Fluent User’s Guid", ANSYS Co., ~ (2018)