시트 프레임 경량화 소재의 해석 물성 구축 및 인장 시험과의 비교 해석에 관한 연구
A Study on the Construction of Analysis Material Card of Weight-Lightening Material of Seat Frame and the Comparative Analysis for Tensile Test
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In recent automobile development, vehicle weight reduction has become a very important goal. Seat weight reduction is a large portion of vehicle weight reduction. In this study, a specimen tensile tests were conducted on the Almag material, which is an alloy of aluminum and magnesium, and also conducted on SAFH440, SAFH 590, SAFC780, and SAFH980, which are mild steel materials used in the seat frame. The tensile specimen tests were carried out in two speed; 2mm/s and 4mm/s, and the obtained stress to strain curve was converted to the analysis material card of true stress to true strain curve to be used in the seat structural analysis. The constructed analysis material card was used in the specimen tensile finite element analysis, and the analysis result was able to obtain the stress to strain curve similar to the test result.
Abstract
In recent automobile development, vehicle weight reduction has become a very important goal. Seat weight reduction is a large portion of vehicle weight reduction. In this study, a specimen tensile tests were conducted on the Almag material, which is an alloy of aluminum and magnesium, and also conducted on SAFH440, SAFH 590, SAFC780, and SAFH980, which are mild steel materials used in the seat frame. The tensile specimen tests were carried out in two speed; 2mm/s and 4mm/s, and the obtained stress to strain curve was converted to the analysis material card of true stress to true strain curve to be used in the seat structural analysis. The constructed analysis material card was used in the specimen tensile finite element analysis, and the analysis result was able to obtain the stress to strain curve similar to the test result.
참고문헌 (13)
- J. W. Lee, "Automotive Sub-frame by Hydro-Forming for Light-Weight Design through Optimization Analysis", J. Korean Soc. Meeh. Technol, 24(3), pp.488~495 (2022)
- S. B. Kim, "A Study on the Analysis of Rotational Torque Values for Vehicle Seat Rail Lead Screws through Dynamic Analysis", J. Korean Soc. Meeh. Technol, 25(5), pp.792~801 (2023)
- K. J. Kim, "Evaluation of Influence of Component Parts on Design Variables of SUV Automotive Sub-frame through Optimization Analysis", J. Korean Soc. Meeh. TechnoL, 24(2), pp.310~315 (2022)
- J. H. Lim, "Material Constitutive Equation for Dynamic Behavior of Materials", KSAE Spring Conference Proceedings, pp.1742~1747 (2007)
- J. S. Lim, "Determining True stress-true strain Curves of Polypropylene Composite", KSAE Spring Conference Proceedings, pp.2315~2320 (2006)
- S. J. Lee, "A study on the comparison of mechanical properties for the development of aluminum embossed battery case", KSAE Fall Conference Proceedings, pp.1607~1607 (2022)
- M. K. Kim, "Asymmetric Hardening Behavior of AZ31B Magnesium Alloy Sheet with Large Strain at Various Strain Rates", International Journal of Automotive Technology, 20(4), pp.645~653 (2019)
- H. Huh, "Dynamic Hardening Equation of the Auto-Body Steel Sheet with the Variation of Temperature", International Journal of Automotive Technology, 13(1), pp.43~60 (2012)
- K. Y. Jeong, "Analysis Process Development for Design of 6000 Series Aluminum Alloy Door Impact Beam", Transactions of KSAE, 31(11), pp.895~903 (2023)
- P. K. Jeong, "Thermal Displacement Analysis of Aluminum Vehicle Parts by Finite Element Analysis", KSAE Spring Conference Proceedings, pp.648~648 (2021)
- R. H. Kim, "Warm Tensile Properties and Microstructures in Magnesium Alloy AZ31 Sheef", KSAE Annual Conference Proceedings, pp.2333~2337 (2011)
- K. S. Lee, "Quasi-static Analysis of Vehicle Seatbelt Using Analysis of Variance and Improvement of Tensile Test Correlation", Transactions of KSAE, 24(3), pp.273~278 (2016)
- S. B. Kim, "Dynamic Tensile Characteristics of the High Strength Steel Sheet for an Auto-body", Transactions of KSAE, 15(1), pp.171~176 (2007)