경량화 소재 변형률에 따른 에너지 흡수 특성을 고려한 시트 프레임 구조 해석
Seat Frame Structural Analysis Considering the Energy Absorption Characteristics according to the Strain Rate of Lightweight Material
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In the development of eco-friendly vehicles such as electric vehicles, weight reduction has become a very important design target. Seat weight reduction is very important in vehicle weight reduction. In this study, the energy absorption characteristics of Almag material, an alloy of aluminum and magnesium, and mild steel SAFH440, SAFH590, SAFC780, and SAFH980 were analyzed to obtain a true stress versus true strain curve that was correlated with the test. By performing the seat frame structure analysis using the obtained analysis material property, it was possible to compare the deformation between lightweight material, Almag and mild steel materials. In addition, it was confirmed that the weight reduction effect was 25.8% when applying Almag, an equivalent lightweight material that gives the same maximum deformation as SAFH980, a high-strength mild steel.
Abstract
In the development of eco-friendly vehicles such as electric vehicles, weight reduction has become a very important design target. Seat weight reduction is very important in vehicle weight reduction. In this study, the energy absorption characteristics of Almag material, an alloy of aluminum and magnesium, and mild steel SAFH440, SAFH590, SAFC780, and SAFH980 were analyzed to obtain a true stress versus true strain curve that was correlated with the test. By performing the seat frame structure analysis using the obtained analysis material property, it was possible to compare the deformation between lightweight material, Almag and mild steel materials. In addition, it was confirmed that the weight reduction effect was 25.8% when applying Almag, an equivalent lightweight material that gives the same maximum deformation as SAFH980, a high-strength mild steel.
참고문헌 (15)
- J. W. Lee, "Hydro-Forming Simulation of Automotive Sub-Frame Main Member by Computer Simulation", J. Korean Soc. Mech. Technol, 24(3), pp.391~395 (2022)
- J. W. Lee, "Automotive Sub-frame by Hydro-Forming for Light-Weight Design through Optimization Analysis", J. Korean Soc. Mech. Technol, 24(3), pp.488~495 (2022)
- S. B. Kim, "A Study on the Analysis of Rotational Torque Values for Vehicle Seat Rail Lead Screws through Dynamic Analysis", J. Korean Soc. Mech. Technol, 25(5), pp.792~801 (2023)
- K. J. Kim, "Evaluation of Influence of Component Parts on Design Variables of SUV Automotive Sub-frame through Optimization Analysis", J. Korean Soc. Mech. Technol, 24(2), pp.310~315 (2022)
- J. H. Lim, "Material Constitutive Equation for Dynamic Behavior of Materials", KSAE Spring Conference Proceedings, pp.1742~1747 (2007)
- J. S. Lim, "Determining True stress-true strain Curves of Polypropylene Composite", KSAE Spring Conference Proceedings, pp.2315~2320 (2006)
- S. J. Lee, "A study on the comparison of mechanical properties for the development of aluminum embossed battery case", KSAE Fall Conference Proceedings, pp.1607~1607 (2022)
- M. K. Kim, "Asymmetric Hardening Behavior of AZ31B Magnesium Alloy Sheet with Large Strain at Various Strain Rates", International Journal of Automotive Technology, 20(4), pp.645~653 (2019)
- H. Huh, "Dynamic Hardening Equation of the Auto-Body Steel Sheet with the Variation of Temperature", International Journal of Automotive Technology, 13(1), pp.43~60 (2012)
- K. Y. Jeong, "Analysis Process Development for Design of 6000 Series Aluminum Alloy Door Impact Beam", Transactions of KSAE, 31(11), pp.895~903 (2023)
- P. K. Jeong, "Thermal Displacement Analysis of Aluminum Vehicle Parts by Finite Element Analysis", KSAE Spring Conference Proceedings, pp.648~648 (2021)
- K. S. Lee, "Quasi-static Analysis of Vehicle Seatbelt Using Analysis of Variance and Improvement of Tensile Test Correlation", Transactions of KSAE, 24(3), pp.273~278 (2016)
- S. B. Kim, "Dynamic Tensile Characteristics of the High Strength Steel Sheet for an Auto-body", Transactions of KSAE, 15(1), pp.171~176 (2007)
- R. H. Kim, "Warm Tensile Properties and Microstructures in Magnesium Alloy AZ31 Sheet", KSAE Annual Conference Proceedings, pp.2333~2337 (2011)
- H. J. Ko, "Analytical Study on the Optimization of B-pillar Structures for the Satisfaction of FMVSS 201U Code", Transactions of KSAE, 29(12), pp.1115~1122 (2021)