공급망 ESG 리스크관리의 제품안전 지표를 위한 제품리스크 평가기법 연구
A product risk assessment method for product safety indicators of supply chain ESG risk management
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
기업의 ESG에 대한 국제 사회의 요구가 점점 높아지는 것과 함께 EU에서 공급망 실사 지침을 발표함에 따라 기업은 이제 공급망 전반에서 발생하는 리스크로 범위를 확대하여 관리해야 한다. 본 논문에서는 공급망ESG 리스크관리를 위하여 공급망에서 발생 가능한 리스크 중 사회 영역의 제품안전과 관련된 지표를 위하여 필요한 제품리스크를 평가하는 기법을 제시한다. 본 논문에서 제시하는 기법은 제품의 고유한 특성인 제품요인과제품 사용과 관련된 환경요인, 그리고 제품 사용 과정 중 발생하는 사고와 이로 인한 부상 간의 인과관계를 반영한 확률 기반의 평가기법이다. 이와 함께 어린이물놀이기구에 리스크평가 기법을 적용한 사례를 보이고 EU의리스크 평가기법과 비교해 본다. 본 논문의 리스크평가 기법은 제품사용 중 발생한 사고 데이터를 사용하여 인과성에 기반하여 리스크를 평가하기 때문에 일반적인 시나리오 기반 평가기법이 지니고 있는 한계를 보완할 수 있다.
Abstract
With the international community's growing demand for corporate ESG and the EU's supply chain due diligence guidelines, companies now have to manage by expanding their scope to risks arising across the supply chain. This paper presents a method for assessing product risks necessary for indicators related to product safety in the social sector among the risks that may occur in the supply chain for ESG risk management. The method presented in this paper is a probability-based assessment method that reflects the causal relationship between product factors, which are the unique characteristics of products, environmental factors related to product use, and accidents that occur during product use and resulting injuries. In addition, an example of applying the risk assessment method to children's water play equipment is shown and compared with EU's risk assessment method. The risk assessment method in this paper can supplement the limitations of general scenario-based assessment methods because it assesses risks based on causality using accident data that occurred during product use
참고문헌 (42)
- 공산품 안전관리를 위한 위해도평가 및 평가모델 구축방안 연구, "국가기술표준원", 산업통상자원부, ~ (2012)
- 위해도 평가모델의 타당성검증및 평가기법의 고도화 연구, "국가기술표준원", 산업통상자원부, ~ (2013)
- 생활제품 안전성향상 기술개발, "국가기술표준원", 산업통상자원부, ~ (2015)
- 어린이제품 품목특성별 제품위해성평가 및 안전관리 개선연구, "국가기술표준원", 산업통상자원부, ~ (2015)
- 박성욱, "중소기업 ESG에 대한 향후 연구 및 지원정책 방향: 키워드 네트워크 분석을 중심으로", 기업경영연구, 29(6), pp.71~95 (2022), 한국기업경영학회
- 법무부, "중대재해 처벌 등에 관한 법률, 법무부 공공형사과 등", 법률 제17907호, 시행 2022.1.27, ~ (2022)
- 산업통상자원부, "어린이제품 안전 특별법. 국가기술표준원 생활어린이제품안전과", 법률 제18819호. 시행 2022.8.4, ~ (2022)
- 산업통상자원부, "공급망 대응 K-ESG 가이드라인", ~ (2022)
- 서정대, "인과네트워크 기반의 제품 리스크 평가모델 연구", 기업경영연구, 22(5), pp.289~306 (2015), 한국기업경영학회
- 중소기업중앙회, "대기업의 협력사 ESG 관리현황", ~ (2023)
- 한국거래소, "ESG 정보 공개 가이던스", ~ (2021)
- 한국소비자원, "『공기주입식 물놀이기구』안전실태 조사 결과", ~ (2022)
- 황재호, "빅데이터를 활용한 ESG의 키워드 연구", 기업경영연구, 29(2), pp.111~136 (2022), 한국기업경영학회
- AAAM, "AIS 2015 Released", Association for the Advancement of Automotive Medicine, INROADS, ~ (2016)
- ACCC, "ACCC Product Safety Nomograph Instructions for Use", Australian Competition &Consumer Commission, ~ (2023)
- Aven, T., "Risk assessment and risk management : Review of recent advances on their foundation", European Journal of Operational Research, 253(1), pp.1~13 (2016)
- "Consumer Injury Surveillance System" (2023)[URL]
- CPSC, "Consumer Product System Safety:Identifying and Managing Risk", Consumer Product Safety Commission, ~ (2015)
- "United States Consumer Product Safety Commission" (2023)[URL]
- Djapic, M., "Technical Product Risk Assessment Standards, Integration in the ERM Model and Uncertainty Modeling", International Journal for Quality Research, 10(1), pp.159~176 (2016)
- Product Risk Assessment Practices of Regulatory Agencies, "DSTI", Directorate for Science, Technology and Innovation. Committee on Consumer Policy. Organisation for Economic Co-operation and Development, ~ (2016)
- Report on International Consumer Product Safety Risk Assessment Practices, "DSTI", Directorate for Science, Technology and Innovation. Committee on Consumer Policy. Organisation for Economic Co-operation and Development, ~ (2016)
- EC, "Commisson Implementing Decision (EU)2019", 417, 2019, ~[DOI]
- EC, "Corporate Sustainability Due Diligence Directive", European Commission, ~ (2022)
- "European Commission" (2023)[URL]
- Fenton, N., "Risk assessment and decision analysis with Bayesian networks" (2018), Crc Press
- Halabi, A., "Using dynamic Bayesian networks to model technical risk management efficiency", Quality and Reliability Engineering International, 33(6), pp.1179~1196 (2017)
- "Health Canada" (2023)[URL]
- IISC, "International Injury Scaling Committee, Abbreviated Injury Scale Update 2008", Association for the Advancement of Automotive Medicine, ~ (2008)
- "NSW Institute of Trauma and Injury Management" (2023)[URL]
- Li, N., "Risk assessment model based on multi-agent systems for complex product design", Information Systems Frontiers, 17(2), pp.363~385 (2015)
- Mahmoudi, H., "A framework for combining social impact assessment and risk assessment", Environmental Impact Assessment Review, 43, pp.1~8 (2013)
- Ministry of Economy, "Risk Assessment Handbook", Trade and Industry, ~ (2011)
- Morfee, P., "The New Zealand Electrical Products Risk Engine", International Conference on Risk Assessment and Management (2009)
- Neil, M., "Causality, the critical but often ignored component guiding us through a world of uncertainties in risk assessment", Journal of Risk Research, 24(5), pp.617~621 (2021)
- "National Institute of Technology and Evaluation" (2023)[URL]
- Hunte, J., "A causal Bayesian network approach for consumer product safety and risk assessment", Journal of Safety Research, 80, pp.198~214 (2022)
- Product Safety Risk Assessment Methodology (PRISM), "OPSS", Office for Product Safety and Standards. Department for Business, Energy and Industrial Strategy, ~ (2022)
- A Primer: 11 Steps to Performing a Robust Product Risk Analysis. Simplexity Product Development, "Ramirez, T.", ~ (2022)
- Rider, G., "Framework model of product risk assessment", International Journal of Injury Control and Safety Promotion, 16(2), pp.73~80 (2009)
- Suh, J., "A Framework for Risk Assessment on Product Safety Management", Journal of Convergence Information Technology, 8(13), pp.587~592 (2013)
- Suh, J., "Development of a Risk Assessment Procedure for Industrial Products using Probabilities of Accidents and Injuries", International Journal of u- and e- Service, Science and Technology, 9(6), pp.101~114 (2016)
