Epoxylite Influece on Field Electron Emission Properties of Tungsten and Carbon Fiber Tips
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This investigation deals with the process of field electron emission from composite microemitters. Tested emitters consisted of a tungsten or carbon-fiber core, coated with a dielectric material. Two coating materials were used: (1) Clark Electromedical Instruments Epoxylite resin and (2) Epidian 6 Epoxy resin (based on bisphenol A). Various properties of these emitters were measured, including the current-voltage characteristics, which are presented as Fowler-Nordheim plots, and the corresponding electron emission images. A field electron microscope with a tip (cathode) to screen (anode) distance of 10 mm was used to electrically characterize the emitters. Measurements were carried out under ultrahigh vacuum conditions with a base pressure of 10–6 Pascal (10–8 mbar).
Abstract
This investigation deals with the process of field electron emission from composite microemitters. Tested emitters consisted of a tungsten or carbon-fiber core, coated with a dielectric material. Two coating materials were used: (1) Clark Electromedical Instruments Epoxylite resin and (2) Epidian 6 Epoxy resin (based on bisphenol A). Various properties of these emitters were measured, including the current-voltage characteristics, which are presented as Fowler-Nordheim plots, and the corresponding electron emission images. A field electron microscope with a tip (cathode) to screen (anode) distance of 10 mm was used to electrically characterize the emitters. Measurements were carried out under ultrahigh vacuum conditions with a base pressure of 10–6 Pascal (10–8 mbar).
참고문헌 (24)
- Alnawasreh S, "Investigating the effects of sample conditioning on nano-apex carbon fiber tips for efficient field electron emission", Jo. J. Phys, 2, pp.95~101 (2015)
- Al-Qudah A M, "Effect of insulating layer on the field electron emission performance of nano-apex metallic emitters", IOP Conf. Ser.: Mater. Sci. Eng, 92, pp.012021~ (2015)
- Bajic S, "Factors influencing the stability of cold-cathodes formed by coating a planar electrode with a metal-insulator composite", J. Phys, 50, pp.C8 79~C8 84 (1989)
- Forbes R G, "Extraction of emission parameters for large-area field emitters, using a technically complete Fowler–Nordheim-type equation", Nanotechnology, 23, pp.095706~ (2012)
- Forbes R G, "Fowler-Nordheim plot analysis: a progress report", Jo. J. Phys, 8, pp.125~147 (2015)
- Latham R V, "Hot electron emission from composite metal-insulator micropoint cathodes", J. Phys. D: Appl. Phys, 19, pp.699~713 (1986)
- Hee-Sun Lee, "Transmission Electron Microscopy Sample Preparation of Ge2Sb2Te5 Nanowire Using Electron Beam", 한국현미경학회지, 45(4), pp.199~202 (2015), 한국현미경학회
- Lilienfeld J R, "The auto electronic discharge and its application to the construction of a New form of X-ray tube", Am. J. Roentgenol, 9, pp.172~179 (1922)
- Madanat M A, "Electronmicroscopy-based performance evaluation of various tungsten fieldemitter tips apex radii", Jo. J. Phys, 8, pp.79~85 (2015)
- Moran Meza J A, "Fabrication of ultra-sharp tips from carbon fiber for scanning tunneling microscopy investigations of epitaxial graphene on 6H-SiC(0001) surface", Carbon, 86, pp.363~370 (2015)
- Mousa M S, "Study of field induced hot-electron emission using the composite microemitters with varying dielectric layer thickness", J. Phys, 48, pp.C6 115~C6 120 (1987)
- Mousa M S, "Effect of Lacomit films on cold-cathode hot-electron emission", J. Phys, 49, pp.C6 237~C6 242 (1988)
- Mousa M S, "A new perspective on the hot-electron emission from metal-insulator microstructures", Surf. Sci, 231, pp.149~159 (1990)
- Mousa M S, "Field electron emission studies on zinc oxide coated tungsten micro emitters", Surf. Sci, 266, pp.110~120 (1992)
- Mousa M S, "Investigations of in-situ carbon coating on field emitter arrays", Vacuum, 45, pp.241~244 (1994)
- Mousa M S, "Influence of a dielectric coating on electron emission from micropoint electron sources", Surf. Interface Anal, 39, pp.102~110 (2007)
- Mousa M S, "Investigating of the field emission performance on nano-apex carbon fiber and tungsten tips", IOP Conf. Ser.: Mater. Sci. Eng, 92, pp.012022~ (2015)
- Mousa M S, "Study of the MgO-coated W emitters by field emission microscopy", Ultramicroscopy, 79, pp.195~202 (1999)
- Mousa M S, "Prototypesusing metal, carbon fiber and composite field emission sources modulated by a laser beam", Ultramicroscopy, 89, pp.129~135 (2001)
- Mousa M S, "Metallic and composite micropoint cathodes : aging effect and electronic and spatial characteristics", Jo. J. Phys, 1, pp.21~26 (2012)
- Mousa M S, "Stabilization of carbon-fiber cold fieldemission cathodes with a dielectric coating", Ultramicroscopy, 95, pp.125~130 (2003)
- Murphy E L, "Thermionic emission, field emission and the transition region", Phys. Rev, 102, pp.1464~1473 (1956)
- Mussa K O, "Characterizing a new composite material: effect of NaOH coating of variable thickness on the properties of a tungsten microemitter", Jo. J. Phys, 5, pp.27~31 (2012)
- Winkler J H, "Gedanken von den Eigenschaften, Wirkungen und Ursachen der Electrizität nebst Beschreibung zweier electrischer Maschinen", Verlag B. Ch