본문 바로가기
KERD
논문KCI 미등재

Microscopic analysis of metal matrix composites containing carbon Nanomaterials

최현주|장혜정|김대영
한국현미경학회 (Korean Society Of Microscopy)|2020.05|Applied Microscopy|제50권 제1호|pp. 1-10|DOI https://doi.org/10.1186/s42649-019-0024-2

2

조회

0

다운로드

0

인용

0

참고문헌

주제분류자연과학일반

초록

Metallic matrix composites reinforced with carbon nanomaterials continue to attract interest because of their excellent mechanical, thermal, and electrical properties. However, two critical issues have limited their commercialization. Uniform distribution of carbon nanomaterials in metallic matrices is difficult, and the interfaces between the nanomaterials and matrices are weak. Microscope-based analysis was recently used to quantitatively examine these microstructural features and investigate their contributions to the composites’ mechanical, thermal, and electrical properties. The impacts of the microstructure on these properties are discussed in the first section of this review. In the second section, the various microscopic techniques used to study the distribution of carbon nanomaterials in metallic matrices and their interfaces are described.

Abstract

Metallic matrix composites reinforced with carbon nanomaterials continue to attract interest because of their excellent mechanical, thermal, and electrical properties. However, two critical issues have limited their commercialization. Uniform distribution of carbon nanomaterials in metallic matrices is difficult, and the interfaces between the nanomaterials and matrices are weak. Microscope-based analysis was recently used to quantitatively examine these microstructural features and investigate their contributions to the composites’ mechanical, thermal, and electrical properties. The impacts of the microstructure on these properties are discussed in the first section of this review. In the second section, the various microscopic techniques used to study the distribution of carbon nanomaterials in metallic matrices and their interfaces are described.

참고문헌 (52)

  1. I. Alfonso, "FEA evaluation of the Al4C3 formation effect on the Young’s modulus of carbon nanotube reinforced aluminum matrix composites", Compos. Struct, 127, pp.420~425 (2015)
  2. R. J. Arsenault, "Dislocation generation due to differences between the coefficients of thermal expansion", Mater. Sci. Eng, 81, pp.175~187 (1986)
  3. S. R. Bakshi, "Carbon nanotube reinforced aluminum composite coating via cold spraying", Surf. Coat. Technol, 202, pp.5162~5169 (2008)
  4. S. R. Bakshi, "Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders", Surf. Coat. Technol, 203, pp.1544~1554 (2009)
  5. 최현주, "풀러렌이 분산된 알루미늄기지 나노복합재의 기계적 거동", Composites Research, 26(2), pp.111~115 (2013), 한국복합재료학회
  6. H. J. Choi, "Reinforcement with carbon nanotubes in aluminum matrix composites", Scr. Mater, 59, pp.360~363 (2008)
  7. H. J. Choi, "Self-assembled network structures in Al", C60 composites, 2010, pp.48, 3700~3707
  8. H. J. Choi, "The effect of milling conditions on microstructures and mechanical properties of Al", MWCNT composites, 2012, pp.43, 1061~1072
  9. H. J. Choi, "Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites", J. Mater. Res, 24, pp.2610~2616 (2009)
  10. T. W. Clyne, "An Introduction to Metal Matrix Composites" (1993), Cambridge University Press
  11. T. H. Courtney, "Mechanical Behavior of Materials" (2005), Waveland Press
  12. H. L. Cox, "The elasticity and strength of paper and other fibrous materials", Br. J. Appl. Phys, 3, pp.72~ (1952)
  13. L. H. Dai, "Size-dependent inelastic behavior of particle-reinforced metal–matrix composites", Compos. Sci. Technol, 61, pp.1057~1063 (2001)
  14. A. Esawi, "Dispersion of carbon nanotubes(CNTs)in aluminum powder", Compos. Pt. A-Appl. Sci. Manuf, 38, pp.646~650 (2007)
  15. A. M. K. Esawi, "Carbon nanotube-reinforced aluminium strips", Compos. Sci. Technol, 68, pp.486~492 (2008)
  16. A. M. K. Esawi, "Fabrication and properties of dispersed carbon nanotube–aluminum composites", Mater. Sci. Eng. A, 508, pp.167~173 (2009)
  17. N. A. Fleck, "The role of geometrically necessary dislocations in giving material strengthening", Scr. Mater, 48, pp.179~183 (2003)
  18. R. George, "Strengthening in carbon nanotube", aluminium(CNT, Scr. Mater, pp.2005, 53[DOI]
  19. C. S. Goh, "Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes", Mater. Sci. Eng. A, 423, pp.153~156 (2006)
  20. C. S. Goh, "Ductility improvement and fatigue studies in mg-CNT nanocomposites", Compos. Sci. Technol, 68, pp.1432~1439 (2008)
  21. J. C. Halpin Affdl, "The Halpin-Tsai equations : A review", Polym. Eng. Sci, 16, pp.344~352 (1976)
  22. P. M. Hazzledine, "Direct versus indirect dispersion hardening", Scripta Metall. Mater, 26, pp.57~58 (1992)
  23. H. Huang, "A numerical study of effect of grain boundaries on elastic and plastic properties in Nanocomposite materials", Key Eng. Mater, 1191, pp.127~131 (1996)
  24. H. Izadi, "Distribution and stability of carbon nanotubes during multipass friction stir processing of carbon nanotube", aluminum composites, 2012, pp.50, 4744~4749
  25. H. N. Jang, "Reduced graphene oxide as a protection layer for Al", Appl. Surf. Sci, 407, pp.1~7 (2017)
  26. M. Kamiński, "Sensitivity and randomness in homogenization of periodic fiberreinforced composites via the response function method", Int. J. Solids Struct, 46, pp.923~927 (2009)
  27. A. K. Keshri, , Surf. Coat. Technol., 203, pp.2193~2201 (2009)
  28. D. Y. Kim, "Synthesis of reduced graphene oxide", aluminum nanocomposites via chemicalmechanical processes, 2018, pp.52, 3015~3025
  29. D. Y. Kim, "Effect of interfacial features on the mechanical and electrical properties of rGO", Al composites, 2017, pp.52, 12001~12012
  30. H. S. Kwon, "Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites", Carbon, 47, pp.570~577 (2009)
  31. T. Laha, "Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming", Compos. Pt. A-Appl. Sci. Manuf, 40, pp.589~594 (2009)
  32. K. Liu, "Theoretical and experimental study on multiphase model of thermal conductivity of fiber reinforced concrete", Constr. Build. Mater, 148, pp.465~475 (2017)
  33. J. W. Luster, "Mechanical properties of aluminium alloy 6061-Al2O3 composites", Mater. Sci. Technol, 9, pp.853~862 (1993)
  34. W. S. Miller, "Strengthening mechanisms in particulate metal matrix composites", Scripta Metall. Mater, 25, pp.33~38 (1991)
  35. K. Morsi, "Spark plasma extrusion(SPE)of ball-milled aluminum and carbon nanotube reinforced aluminum composite powders", Compos. Pt. A-Appl. Sci. Manuf, 41, pp.322~326 (2010)
  36. I. L. Ngo, "A modified Hashin-Shtrikman model for predicting the thermal conductivity of polymer composites reinforced with randomly distributed hybrid fillers", Int. J. Heat Mass Transf, 114, pp.727~734 (2017)
  37. E. Orowan, "Zur Kristallplastizität III", Z. Phys, 89, pp.634~659 (1934)
  38. M. Paramsothy, "Adding carbon nanotubes and integrating with AA5052 aluminium alloy core to simultaneously enhance stiffness, strength and failure strain of AZ31 magnesium alloy", Compos. Pt. AAppl. Sci. Manuf, 40, pp.1490~1500 (2009)
  39. K. T. Park, "High-temperature deformation of 6061 Al", Acta Metall. Mater, 42, pp.667~678 (1994)
  40. R. Pérez-Bustamante, "Microstructural and mechanical characterization of Al–MWCNT composites produced by mechanical milling", Mater. Sci. Eng. A, 502, pp.159~163 (2009)
  41. J. Phiri, "A comparative study of mechanical, thermal and electrical properties of graphene-, graphene oxide- and reduced graphene oxide-doped microfibrillated cellulose nanocomposites", Compos. Pt. B-Eng, 147, pp.104~113 (2018)
  42. F. Scarpa, "Effective elastic mechanical properties of single layer graphene sheets", Nanotechnology, 20, pp.065709~ (2009)
  43. S. E. Shin, "Strengthening behavior of few-layered graphene", aluminum composites, 2015, pp.82, 143~151
  44. S. E. Shin, "Strengthening behavior of carbon", metal nanocomposites, 2015, pp.5, 16114~
  45. I. Sridhar, "Processing and characterization of MWCNT reinforced aluminum matrix composites", J. Mater. Sci, 44, pp.1750~1756 (2009)
  46. L. Thilly, "Deformation mechanism in high strength cu", Nb nanocomposites, 2001, pp.309-310, 510~513
  47. W. Tian, "Interphase model for FE prediction of the effective thermal conductivity of the composites with imperfect interfaces", Int. J. Heat Mass Transf, 145, pp.118796~ (2019)
  48. S. I. Torigoe, "Study on evaluation method for PVA Fiber distribution in engineered Cementitious composite", J. Adv. Concr. Technol, 1, pp.265~268 (2003)
  49. H. Uozumi, "Fabrication process of carbon nanotube", light metal matrix composites by squeeze casting, 2008, pp.495, 282~287
  50. R. Vogt, "The absence of thermal expansion mismatch strengthening in nanostructured metal–matrix composites", Scr. Mater, 61, pp.1052~1055 (2009)
  51. Z. Zhang, "Consideration of Orowan strengthening effect in particulatereinforced metal matrix nanocomposites : A model for predicting their yield strength", Scr. Mater, 54, pp.1321~1326 (2006)
  52. R. Zhong, "Fabrication of nano-Al based composites reinforced by single-walled carbon nanotubes", Carbon, 41, pp.848~851 (2003)

관련 논문AI추천

Influence of ball milling time on structural stability and distribution of CNTs in aluminium matrix compositesG. Murali, M. Gopal, R. Murugesan청정에너지연구소 · Journal of Ceramic Processing Research2019 · 제20권 제5호Experimental investigation on mechanical properties of Multi Wall Carbon Nanotubes (MWCNT) reinforced aluminium metal matrix compositesElif Burcu Yilmaz, İsmail Topcu, Muhammet Ceylan청정에너지연구소 · Journal of Ceramic Processing Research2020 · 제21권 제5호최신 금속복합재료의 연구 개발 동향 및 응용 현황김효섭한국분말재료학회 · 한국분말재료학회지2020 · 제27권 제2호Tensile properties of three-dimensionally interconnected graphene-networked Cu composite and changes in its microstructure in relation to heat treatment temperature조동민, 조용덕, 최병상, Xue Li공학기술연구원 · 공학기술논문지2019 · 제12권 제2호Fabrication and Mechanical Characteristics of Bulk Nickel/Carbon Nanotube Nanocomposites via the Electrical Explosion of Wire in Liquid and Spark Plasma Sintering Method김진천, Hai-Nguyen Hong, Ho Yoon Kim, Thuyet-Nguyen Minh, Won Joo Kim한국분말재료학회 · 한국분말재료학회지2016 · 제23권 제3호Investigations on aluminium hybrid composites reinforced with ZrB2/Al2O3/Multi-Walled Carbon Nanotube (MWCNT) for aerospace applicationsAmal Bosco Jude S, Elaya Perumal Annamalai, Jinu GR, Vidhyalakshmi S청정에너지연구소 · Journal of Ceramic Processing Research2020 · 제21권 제5호

이 간행물의 다른 논문 (3건)

Microstructural evolution of tantalum nitride thin films synthesized by inductively coupled plasma sputtering김영운, Sung-Il Baikpp. 1-10Introduction to the standard reference data of electron energy loss spectra and their database: eel.geri.re.kr김지수, 김민수, 박주철, 채정은, 남상열pp. 1-7Differential synapse density between Purkinje cell dendritic spine and parallel fiber varicosity in the rat cerebellum among the phylogenic lobules이세정, 김현욱, Seung Hak Oh, Ji eun Na, 유임주pp. 1-6
원문 보기