Fabrication and Mechanical Characteristics of Bulk Nickel/Carbon Nanotube Nanocomposites via the Electrical Explosion of Wire in Liquid and Spark Plasma Sintering Method
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, bulk nickel-carbon nanotube (CNT) nanocomposites are synthesized by a novel method which includes a combination of ultrasonication, electrical explosion of wire in liquid and spark plasma sintering. The mechanical characteristics of the bulk Ni-CNT composites synthesized with CNT contents of 0.7, 1, 3 and 5 wt.% are investigated. X-ray diffraction, optical microscopy and field emission scanning electron microscopy techniques are used to observe the different phases, morphologies and structures of the composite powders as well as the sintered samples. The obtained results reveal that the as-synthesized composite exhibits substantial enhancement in the microhardness and values more than 140 HV are observed. However an empirical reinforcement limit of 3 wt.% is determined for the CNT content, beyond which, there is no significant improvement in the mechanical properties.
Abstract
In this study, bulk nickel-carbon nanotube (CNT) nanocomposites are synthesized by a novel method which includes a combination of ultrasonication, electrical explosion of wire in liquid and spark plasma sintering. The mechanical characteristics of the bulk Ni-CNT composites synthesized with CNT contents of 0.7, 1, 3 and 5 wt.% are investigated. X-ray diffraction, optical microscopy and field emission scanning electron microscopy techniques are used to observe the different phases, morphologies and structures of the composite powders as well as the sintered samples. The obtained results reveal that the as-synthesized composite exhibits substantial enhancement in the microhardness and values more than 140 HV are observed. However an empirical reinforcement limit of 3 wt.% is determined for the CNT content, beyond which, there is no significant improvement in the mechanical properties.
참고문헌 (21)
- IIjima S, , Nature, 354, pp.56~ (1991)
- S. R. Bakshi, , Thin Solid Films., 518, pp.1703~ (2010)
- J.N. Boland, , Materials, 3, pp.1390~ (2010)
- Nuno Silvestre, , Int. J. Compos. Mater., 3, pp.28~ (2013)
- S. R. Bakshi, , Int. Mater. Rev., 55, pp.41~ (2010)
- S. Yamanaka, , Mater. Trans., 48, pp.2506~ (2007)
- S. Cha, , Adv. Mater., 70, pp.1377~ (2005)
- J. Y. Hwang, , Carbon., 57, pp.282~ (2013)
- T. Borkar, , J. Mater. Res., 29, pp.761~ (2014)
- T. Borkar, , Mater. Sci. Eng. A, 618, pp.176~ (2014)
- N. Saheb, , J. Nanomater., 2012, pp.13~ (2012)
- L. H. Bac, , Res. Chem. Intermed., 36, pp.795~ (2010)
- L. H. Bac, , Mater. Res. Bull., 45, pp.352~ (2010)
- H. W. Kroto, , Nature, 318, pp.162~ (1985)
- D. Ugarte, , Nature, 359, pp.707~ (1992)
- M. Zeiger, , Carbon., 84, pp.584~ (2015)
- A. Koshio, , Nano Lett., 1, pp.361~ (2001)
- J. Zhu, , J. Phys. Chem. B, 108, pp.11317~ (2004)
- A. S. Muhsan, , Int. J. Powder Metall., 51, pp.57~ (2015)
- A. S. Muhsan, , Nanosci. Nanotechnol. Lett., 6, pp.865~ (2014)
- Suarez, , Mater. Sci. Eng.A, 587, pp.381~ (2013)