개선된 엑세스 홀 형상을 갖는 WUF-W접합부의 실험 을 통한 내진성능평가
Experimental Evalutation of the Seismic Performance of WUF-W Moment Connections with a Modified Access Hole
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Welded Unreinforced Flange-Welded Web (WUF-W) connection is one of Special Moment Frame (SMF) specified in ANSI/AISC-358. From the experimental test of WUF-W connection specimens conducted by the previous study, fracture occurred in the beam flange before achieving total inter-story drift angle of 0.04radian required for Special Moment Frames (SMF) system even though the specimens satisfied the design and detailing requirement specified in ANSI/AISC-358. These results are estimated as problem of the access hole geometry. In this study, a full-scale WUF-W connection specimen was made with a modified access hole geometry, and tested with the same test setting and loading as the previous test. From test results, the deformation capacity of the tested WUF-W connection specimen exceeded 4%, which is required for connections in SMF system. Comparing with the WUF-W specimens of the previous study, the strain demand of the beam flange in the tested specimen was decreased and energy dissipation capacity of the specimen was improved.
Abstract
Welded Unreinforced Flange-Welded Web (WUF-W) connection is one of Special Moment Frame (SMF) specified in ANSI/AISC-358. From the experimental test of WUF-W connection specimens conducted by the previous study, fracture occurred in the beam flange before achieving total inter-story drift angle of 0.04radian required for Special Moment Frames (SMF) system even though the specimens satisfied the design and detailing requirement specified in ANSI/AISC-358. These results are estimated as problem of the access hole geometry. In this study, a full-scale WUF-W connection specimen was made with a modified access hole geometry, and tested with the same test setting and loading as the previous test. From test results, the deformation capacity of the tested WUF-W connection specimen exceeded 4%, which is required for connections in SMF system. Comparing with the WUF-W specimens of the previous study, the strain demand of the beam flange in the tested specimen was decreased and energy dissipation capacity of the specimen was improved.
참고문헌 (16)
- A survey of steel momnet resisting frame buildings affected by the 1994 Northridge earthquake, "Youssef NFG", National Institute of Standard and Technology, ~, pp.Rep. No. NISTIR 5625 (1995)
- Development and evaluation of improved ductile welded unreinforced flange connections, "Ricles JM", SAC Joint Venture, Sacramento, Calif., ~, pp.Rep. No. SAC (2000), BD-00[DOI]
- Lee D, "Cyclic connections Reinforced by Alternative Column Stiffner Details Ⅰ., Panel Zone Behavior and Doubler Plate Detailing", Engineering Journal, 42(4), pp.189~214 (2005)
- Lee D, "Cyclic connections Reinforced by Alternative Column Stiffner Details Ⅱ., Panel Zone Behavior and Doubler Plate Detailing", Engineering Journal, 42(4), pp.215~238 (2005)
- AISC, "Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications. ANSI", AISC 358-05, 2005
- 황성훈, "WUF-W 모멘트 접합부의 비탄성 반복 하중 실험", 대한건축학회논문집 구조계, 26(10), pp.61~68 (2010), 대한건축학회
- Lu LW, "Critical issues in achieving ductile behaviour of welded moment connections", Journal of Constructional Steel Research, 55, pp.325~341 (2000)
- Mao C, "Effect of local details on ductility of welded momnet connections", Journal of Structural Engineering, 127(9), pp.1036~1044 (2001)
- AWS, "Structural Welding Code-Seismic Supplement. AWS D1.8", D1.8M, 2009
- AISC, "Seismic provisions for structural steel buildings. ANSI", AISC341-05, 2005
- AISC, "Specification for Structural Steel Buildings. ANSI", AISC360-05, 2005
- Loading histories for seismic performance testing of SMRF components and assemblies, "Krawinkler H", SAC Joint Venture. Sacramento. Calif., ~, pp.Report No. SAC, BD-00[DOI]
- Ricles JM, "Inelastic Cyclic Testing of Welded Unreinforced Moment Connections", Journal of Structural Engineering, 128(4), pp.429~440 (2002)
- Strength and Ductility of FR Welded-Bolted Connections, "El-Tawil S", SAC Joint Venture, ~, pp.Report No. SAC (1998), BD-98[DOI]
- Han SW, "Cyclic behaviour of post-Northrdge WUF-B connections", Jounal of Constructional Steel Research, 63(3), pp.365~374 (2000)
- Ricles JM, "Development of improved welded moment connections for earthquake-resistant design", Journal of Structural Engineering, 58(19), pp.565~604 (2000)