세계지진기록에 근거한 우리나라의 지진하중 평가
Evaluation of Seismic Load Level in Korea based on Global Recorded Earthquake Ground Motions
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This paper briefly introduces the design seismic loads in Korea (KBC 2009). Then, over 10,000 recorded earthquake ground accelerograms, with their magnitude ranging from 4.0 to 8.0 and their epicentral distance ranging from 0 to 200 km, were used to examine the appropriateness of seismic load defined in Korea known as a low-to-moderate seismicity region. The following conclusions are drawn based on the results: (1) The effective peak ground accelerations (EPA) of recorded earthquake accelerograms under M ≤ 6.0 and R ≥15 km appear to be less than that of MCE in Korea for all site conditions defined in KBC 2009. (2) The design spectrum (two-thirds of the intensity of MCE) in KBC 2009 is comparable to those of earthquake records in the magnitude 6 - 7 and the epicentral distance less than 50 km. Therefore, (3) the intensity of Korean design earthquake is considered to be overly high since the Korea peninsula is generally conceived to be a low-seismicity region.
Abstract
This paper briefly introduces the design seismic loads in Korea (KBC 2009). Then, over 10,000 recorded earthquake ground accelerograms, with their magnitude ranging from 4.0 to 8.0 and their epicentral distance ranging from 0 to 200 km, were used to examine the appropriateness of seismic load defined in Korea known as a low-to-moderate seismicity region. The following conclusions are drawn based on the results: (1) The effective peak ground accelerations (EPA) of recorded earthquake accelerograms under M ≤ 6.0 and R ≥15 km appear to be less than that of MCE in Korea for all site conditions defined in KBC 2009. (2) The design spectrum (two-thirds of the intensity of MCE) in KBC 2009 is comparable to those of earthquake records in the magnitude 6 - 7 and the epicentral distance less than 50 km. Therefore, (3) the intensity of Korean design earthquake is considered to be overly high since the Korea peninsula is generally conceived to be a low-seismicity region.
참고문헌 (16)
- AIK., "Korean Building Code, KBC 2009", Architectural Institute of Korea, ~ (2009)
- ICC, "International Building Code, IBC 2000. International Code Council", Country Club Hills, ~ (2000)
- Chung KR, "Eliminating special seismic boundary of special shear wall system using NLTHA", (Fall), pp.1~2 (2013), Korea Concrete Institute Conference
- "PEER Ground Motion Database"[URL]
- Comments on the seismic design provisions of the Korean Building Code 2009, Opinion paper, "Fardis MN", ~ (2014)
- AIK, "AIK 2000", Architectural Institute of Kor, ~ (2001)
- AIK, "Korean Building Code, KBC 2005", Architectural Institute of Korea, ~ (2005)
- AS, "AS 1170.4. Structural Design Actions Part 4: Earthquake Actions in Australia", Standards Australia, NSW, ~ (2007)
- Lam N, "Response spectral relationships for rock sites derived from the component attenuation model", Earthquake engineering & structural dynamics, 29(10), pp.1457~1489 (2000)
- Lam N, "Response spectrum modelling for rock sites in low and moderate seismicity regions combining velocity, displacement and acceleration predictions", Earthquake engineering & structural dynamics, 29(10), pp.1491~1525 (2000)
- Lumantarna E, "Bi-linear displacement response spectrum model for engineering applications in low and moderate seismicity regions", Soil Dynamics and Earthquake Engineering, 43, pp.85~96 (2012)
- CEN, "European Standard EN 1998-1:2004 Eurocode 8: Design of Structures for Earthquake Resistance, Part 1: General rules, seismic actions and rules for buildings", Comite European de Normalisation, ~ (2004)
- Federal Emergency Management Agency, "NEHRP Recommendation Provisions for Seismic Regulations for New Buildings and Other structures Part II: Commentary (FEMA 450-2)", ~ (2003)
- Wilson JL, "Earthquake design of buildings in Australia using velocity and displacement principles", Australian Journal of Structural Engineering, 6(2), pp.103~ (2006)
- "Korea Meteorological Administration"[URL]
- Looi DTW, "Earthquake loading model in the proposed National Annex to Eurocode 8 for peninsular Malaysia", IStructE Conference 2013 (2013)