한국 표준설계스펙트럼의 감쇠보정계수에 대한 연구
A Study on the Damping Correction Factors for the Korean Standard Design Spectrum
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, we develop and propose damping correction factors for the Korean standard design spectra. The newly proposed Korean standard design spectra has been given only for 5% damping ratio. But in practice, engineers need design spectra for damping values other than 5%. To obtain design spectra for various damping values from the standard spectra, damping correction factors are derived. These factors modify the shape of design spectra in accordance with the damping ratio. Response spectra for various damping values are calculated from the earthquake records that had been used to calculate standard design spectra. They consist of 55 records from 18 earthquakes occurred in overseas intraplate regions and Korea. The regressed spectra for the damping values ranging from 0.5% to 50 % are compared with standard spectra at three regions acceleration, velocity and displacement sensitive regions. The regression analysis of these data rendered formula for damping correction factors. Finally, a single formula for damping correction factors is recommended that is valid for both horizontal and vertical design spectra and that is applicable to the entire range of periods. One thing to note that recommended damping correction factors is valid for the design spectrum of the rock grounds because the design spectra was developed based on the earthquake records of the rock ground.
Abstract
In this study, we develop and propose damping correction factors for the Korean standard design spectra. The newly proposed Korean standard design spectra has been given only for 5% damping ratio. But in practice, engineers need design spectra for damping values other than 5%. To obtain design spectra for various damping values from the standard spectra, damping correction factors are derived. These factors modify the shape of design spectra in accordance with the damping ratio. Response spectra for various damping values are calculated from the earthquake records that had been used to calculate standard design spectra. They consist of 55 records from 18 earthquakes occurred in overseas intraplate regions and Korea. The regressed spectra for the damping values ranging from 0.5% to 50 % are compared with standard spectra at three regions acceleration, velocity and displacement sensitive regions. The regression analysis of these data rendered formula for damping correction factors. Finally, a single formula for damping correction factors is recommended that is valid for both horizontal and vertical design spectra and that is applicable to the entire range of periods. One thing to note that recommended damping correction factors is valid for the design spectrum of the rock grounds because the design spectra was developed based on the earthquake records of the rock ground.
참고문헌 (19)
- U.S. Nuclear Regulatory Commission (NRC), "Design Response Spectra for Seismic Design of Nuclear Power Plants (Regulatory Guide 1.60)", 5~9 (2014)
- American Association of State Highway and Transportation Officials (AASHTO), "Guide Specifications for Seismic Isolation Design", AASHTO, 28~ (2000)
- Federal Emergency Management Agency (FEMA), "NHERP Guidelines for the seismic rehabilitation of buildings (FEMA 273)", FEMA, 22~23 (1997)
- Federal Emergency Management Agency (FEMA), "Improvement of nonlinear static seismic analysis procedures (FEMA 440)", FEMA, 5~6 (2005)
- Federal Emergency Management Agency (FEMA), "NEHRP Recommended Seismic Provisions for Seismic Regulations for New Buildings and Other Structures (FEMA P-750)", FEMA, 221~222 (2009)
- Comite EuropEen de Normalisation, "Eurocode 8: Design of Structures for Earthquake Resistance, Part 1: General Rules Seismic Actions and Rules for Buildings", ComitE EuropEen de Normalisation, 40~ (2004)
- Japan Road Association, "Standard Specification for Highway Bridges of Japan", Japan Road Association, 7~ (2002)
- EESK, "The Research of Seismic Design Code(II)", Ministry of Construction and Transportation, ~ (1997)
- Korea Road Association, "Korean Highway Bridge Design Code(Limit state design) Cable Bridge part", Ministry of Construction and Transportation, 10~ (2014)
- 김재관, "국내외 판내부 지진기록을 이용한 한국 표준수평설계스펙트럼의 개발", 한국지진공학회논문집, 20(6), pp.369~378 (2016), 한국지진공학회
- 김재관, "국내외 판내부 지진기록을 이용한 한국 표준수직설계스펙트럼의 개발", 한국지진공학회논문집, 20(6), pp.413~424 (2016), 한국지진공학회
- "Ministry of Public Safety and Security"[URL]
- Architectural Institute of Korea, "Korean Building Code And Commentary 2016", ~ (2016)
- Applied Technology Council (ATC), "Seismic evaluation and retrofit of concrete buildings", ~ (1996)
- "Domestic Earthquake List"[URL]
- Kenneth W, "NGA Ground Motion Model for the Geometric Mean Horizontal Component of PGA, PGV, PGD and 5% Damped Linear Elastic Response Spectra for Periods Ranging from 0.01 to 10 s", Earthquake Spectra, 24(1), pp.139~171 (2008)[DOI]
- Boore DM, "Orientation-Independent Measures of Ground Motion", Bulletin of the Seismological Society of America, 96(4A), pp.1502~1511 (2006)
- American Society of Civil Engineers (ASCE), "Minimum Design Loads for Buildings and Other Structures. ASCE", SEI 7-10;Site-specific Ground Motion Porcedures for Seismic Design, 2010, pp.207~209
- Davenport WB Jr., "Probability and random processes: an introduction for applied scientists and engineers", pp.542~ (1970), McGraw-Hill