EQS 면진장치의 항복 후 강성을 고려한 면진 원전구조물의 지진응답
Seismic Responses of Seismically Isolated Nuclear Power Plant Structure Considering Post-Yield Stiffness of EQS Bearing
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The Eradi Quake System (EQS) is a seismic isolation bearing system designed to minimize forces and displacements experienced by structures subjected to ground motion. The EQS dissipates seismic energy through friction of Poly Tetra Fluoro Ethylene (PTFE) disk pad. In general, a force-displacement relationship of EQS has post yield stiffness hardening during large inelastic displacement. In this study, seismic responses of seismically isolated nuclear power plant (NPP) subjected to design basis earthquake (DBE) and beyond design basis earthquakes (150% DBE and 167% DBE) are compared considering the post yield stiffness hardening effect of EQS. From the results, it can be observed that if the post-yield stiffness hardening effect of EQS is increased, the displacement response of EQS is reduced, and the acceleration and shear responses of containment structures of NPP is increased.
Abstract
The Eradi Quake System (EQS) is a seismic isolation bearing system designed to minimize forces and displacements experienced by structures subjected to ground motion. The EQS dissipates seismic energy through friction of Poly Tetra Fluoro Ethylene (PTFE) disk pad. In general, a force-displacement relationship of EQS has post yield stiffness hardening during large inelastic displacement. In this study, seismic responses of seismically isolated nuclear power plant (NPP) subjected to design basis earthquake (DBE) and beyond design basis earthquakes (150% DBE and 167% DBE) are compared considering the post yield stiffness hardening effect of EQS. From the results, it can be observed that if the post-yield stiffness hardening effect of EQS is increased, the displacement response of EQS is reduced, and the acceleration and shear responses of containment structures of NPP is increased.
참고문헌 (16)
- 박형기, "폴리우레탄 스프링 복원형 디스크 받침의 동적거동에 대한 실험 및 해석적 연구", 한국지진공학회논문집, 15(2), pp.61~69 (2011), 한국지진공학회
- 유성문, "ICT센터 사례 연구를 통한 EQS의 건축 구조물 면진에 의 적용 연구", 한국지진공학회논문집, 17(2), pp.61~70 (2013), 한국지진공학회
- Federal Emergency Management Agency, "NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings(FEMA 274)Ch. 9", Seismic Isolation and Energy Dissipation, ~ (1997)
- Lysmer J, "A system for analysis of soil-structure interaction. SASSI 2000 theoretical manual", ~ (1999)
- "OpenSees: Open System of Earthquake Engineering Simulation" (2007)[URL]
- Hancock J, "An improved method of matching response spectra of recorded earthquake ground motion using wavelets", Journal of Earthquake Engineering, 10(S1), pp.67~89 (2006)
- U.S. Atomic Energy Commision, "Regulatory Guide 1.60. Design response spectra for seismic design of nuclear power plants", ~ (1973)
- Seok CG, "Seismic Response Evaluation of NPP Containment Structures According to Model Characteristics of The Isolation System", 석사, pp.2015
- 이유인, "원전 EQS 면진장치의 성능개선을 위한 연구", 한국지진공학회논문집, 19(1), pp.13~19 (2015), 한국지진공학회
- Jung DY, "Dynamic and Long-term Behavior Characteristics of Sliding Isolation Disk Bearing with Polyurethane and PTFE", 박사, pp.2011
- U.S. Nuclear Regulatory Commission, "Technical Considerations for Seismic Isolation of Nuclear Facilities(Draft)", ~ (2012)
- ASCE, "ASCE", SEI 4-16. Seismic analysis of safety-related nuclear structures
- Oh J, "An Experimental Study on the Characteristics of Bridge Bearing Using Polyurethane", Journal of Earthquake Engineering Society of Korea, 03, pp.134~141 (2008)
- Kang TW, "The Method of Optimal Stiffness Design for Eradi-Quake System", Journal of Korean Society of Civil Engineers, pp.286~289 (2009)
- Shim HH, "Friction and Wear Characteristics of PTFEPolyimide Composite", Journal of Korean Society of Tribologists and Lubrication Engineers, 11(4), pp.28~34 (1995)
- Oh J, "Compressive Horizontal Load Dependent Characterization Test of Isolation Disk Bearing", Journal of Korean Society of Civil Engineers, pp.2299~2302 (2009)