헌치를 이용하여 보강된 RC 보-기둥 외부접합부의 반복이력 특성
Hysteresis Characteristics of RC Exterior Beam-Column Joint Retrofitted with Haunch
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
To investigate the cyclic characteristics of the retrofitted exterior joints of RC frame with haunch, 70% scaled 6 beam-column exterior joint subassemblies were designed according to design guideline according to 1988 and tested with cyclic loading up to 3.5% story drift ratio. During the experiments axial forces are applied to columns to simulate gravity load. Experimental results shows that the strength of retrofitted specimens was increased steadily until 2.5% story drift ratio and their strengths increased more than 1.7 times of the non-retrofitted in case that main bar was bent away from exterior joint. The joint strength and effective stiffness of the retrofitted specimen was increased and results in more deformation capacity compared to the non-retrofitted.
Abstract
To investigate the cyclic characteristics of the retrofitted exterior joints of RC frame with haunch, 70% scaled 6 beam-column exterior joint subassemblies were designed according to design guideline according to 1988 and tested with cyclic loading up to 3.5% story drift ratio. During the experiments axial forces are applied to columns to simulate gravity load. Experimental results shows that the strength of retrofitted specimens was increased steadily until 2.5% story drift ratio and their strengths increased more than 1.7 times of the non-retrofitted in case that main bar was bent away from exterior joint. The joint strength and effective stiffness of the retrofitted specimen was increased and results in more deformation capacity compared to the non-retrofitted.
참고문헌 (10)
- Experimental results of repaired and retrofitted beam-coulumn joint tests in lightly reinforced concrete frame buildings, "Beres A", NCEER, ~, pp.Technical Report NCEER-92-0025 (1992)
- Gravityload-designed reinforced concrete Buildings: Seismic evaluation of existing construction and detailing strategies for improved seismic resistance, "Hoffmann GW", NCEER, ~, pp.Technical Report NCEER-92-0016 (1992)
- Calvi GM, "Experimental test on a three story RC frame designed for gravity only", 12th European Conference on Earthquake Engineering (2001), Elsevier Science Ltd
- Priestley MJN, "Displacement Based Seismic Assessment of Existing Reinforced Concrete Moment Resisting Frames", Pacific Conference of Earthquake Engineering, 2, pp.225~244 (1995)
- 이영욱, "비내진설계된 우리나라 RC 외부 접합부의 횡저항 능력에 관한 실험", 한국지진공학회논문집, 14(4), pp.29~36 (2010), 한국지진공학회
- FEMA, "Prestandard and commentary for the seismic rehabilitation of buildings (FEMA 356)", ~ (2000)
- Pampanin S, "Development and validation of a metallic haunch seismic retrofit solution for existing underdesigned RC frame buildings", Earthquake Engineering Structutural Dynamics, 35, pp.1739~1766 (2006)
- Ministry of Construction, "RC structural design guideline by strength design method", ~ (1998)
- Ministry of Land. Infrastructure and Transport, "Korea Building Code", ~ (2016)
- Park R, "Reinforced Concrete Structures" (1975), John Wiley &Sons