LRB 면진장치를 적용한 원전구조물의 지진응답에 따른 확률론적 연구
A Probabilistic Study on Seismic Response of Seismically Isolated Nuclear Power Plant Structures using Lead Rubber Bearing
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The seismically isolated nuclear power plants shall be designed for design basis earthquake (DBE) and considered to ensure safety against beyond design basis earthquake (BDBE). In order to limit the excessive displacement of the seismic isolation system of the seismically isolated structure, the moat is installed at a certain distance from the upper mat supporting the superstructure. This certain distance is called clearance to stop (CS) and is calculated from the 90th percentile displacement of seismic isolation system subjected to BDBE. For design purposes, the CS can be obtained simply by multiplying the median displacement of the seismic isolation system against DBE by scale factor with a value of 3. The DBE and BDBE used in this study were generated by using 30 sets of artificial earthquakes corresponding to the nuclear standard design spectrum. In addition, latin hyper cube sampling was applied to generate 30 sets of artificial earthquakes corresponding to maximum - minimum spectra. For the DBE, the median displacement and the 99th percentile displacement of the seismic isolation system were calculated. For the BDBE, the suitability of the scale factor was assessed after calculating the 90th percentile displacement of the seismic isolation system.
Abstract
The seismically isolated nuclear power plants shall be designed for design basis earthquake (DBE) and considered to ensure safety against beyond design basis earthquake (BDBE). In order to limit the excessive displacement of the seismic isolation system of the seismically isolated structure, the moat is installed at a certain distance from the upper mat supporting the superstructure. This certain distance is called clearance to stop (CS) and is calculated from the 90th percentile displacement of seismic isolation system subjected to BDBE. For design purposes, the CS can be obtained simply by multiplying the median displacement of the seismic isolation system against DBE by scale factor with a value of 3. The DBE and BDBE used in this study were generated by using 30 sets of artificial earthquakes corresponding to the nuclear standard design spectrum. In addition, latin hyper cube sampling was applied to generate 30 sets of artificial earthquakes corresponding to maximum - minimum spectra. For the DBE, the median displacement and the 99th percentile displacement of the seismic isolation system were calculated. For the BDBE, the suitability of the scale factor was assessed after calculating the 90th percentile displacement of the seismic isolation system.
참고문헌 (15)
- American Society of Civil Engineers (ASCE), "Seismic design criteria for structures, systems, and components in nuclear facilities, ASCE 43-05", ~ (2005)
- Assessment of base-isolated nuclear structures for design and beyond-design basis earthquake shaking, "Huang YN", ~, pp.Technical Report MCEER0-09-0008 (2009)
- SAP2000 linear and nonlinear static and dynamic analysis and design of three-dimensional structures, "Computer and Structures, Inc.", CSI, ~ (2004)
- "OpenSEES: open system of earthquake engineering simulation, pacific earthquake engineering center" (2007)[URL]
- Lee SJ, "Guidelines of designing LRB for a cable-stayed bridge to reduce seismic responses", Conference Proceeding of the Korean Society of Civil Engineers, pp.914~920 (2003)
- 송종걸, "납-고무 받침에 의해 면진된 원전구조물의 응답에 대한 Bouc-Wen 모델 및 지진특성의 영향", 한국지진공학회논문집, 21(2), pp.95~103 (2017), 한국지진공학회
- Hancock J, "An improved method of matching response spectra of recorded earthquake ground motion using wavelets", Journal of Earthquake Engineering, 10(S1), pp.67~89 (2006)
- 석철근, "마찰진자시스템의 마찰계수 변화에 따른 면진된 원전구조물의 거동특성 비교", 한국지진공학회논문집, 20(2), pp.125~134 (2016), 한국지진공학회
- Huang YN, "Maximum spectral demands in the near fault region", Earthquake Spectra, 24(1), pp.319~341 (2008)
- Stewart JP, "Representation of bidirectional ground motions for design spectra in building codes", Earthquake Spectra, 27(3), pp.927~937 (2011)[DOI]
- Boore DM, "Orientation-independent measures of ground motion", Bulletin of the Seismological Socirty of America, 96(4A), pp.1502~1511 (2006)[DOI]
- American society of civil engineers, "seismic analysis of safetyrelated nuclear structures, ASCE", SEI 4-16, 2017
- "Korea electric power industry code. KEPIC-STC seismic design isolations", Korea Electric Association, ~
- Technical considerations for the seismic isolation of nuclear facilities, "Kammerer AM", United States Nuclear Regulatory Commission (USNRC), ~, pp.NUREG-XXXX (2012)
- 김범수, "EQS 면진장치의 항복 후 강성을 고려한 면진 원전구조물의 지진응답", 한국지진공학회논문집, 20(5), pp.319~329 (2016), 한국지진공학회