Extension of Direct Displacement-Based Design to Include Higher-Mode Effects in Planar Reinforced Concrete Frame Buildings
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Now that problems with force-based seismic design have been clearly identified, design is inclined toward displacement-based methods. One such widely used method is Direct-Displacement-Based Design (DDBD). Yet, one of the shortcomings of DDBD is considering higher-mode amplification of story shear, moments, and displacements using equations obtained from limited parametric studies of regular planar frames. In this paper, a different approach to account for higher-mode effects is proposed. This approach determines the lateral secant stiffness of the building frames that fulfill the allowable inter-story drift without exceeding the desired story displacements. Using the stiffness, an elastic response spectrum analysis is carried out to determine elastic higher-mode force effects. These force effects are then combined with DDBD-obtained first-mode force effects using the appropriate modal superposition method so that design can be performed. The proposed design procedure is verified using Nonlinear Time History Analysis (NTHA) of twelve planar frames in four categories accounting for mass and stiffness irregularity along the height. In general, the NTHA response outputs compared well with the allowable limits of the performance objective. Thus, it fulfills the aim of minimizing the use of NTHA for planar frame buildings, thereby saving computational resources and effort.
Abstract
Now that problems with force-based seismic design have been clearly identified, design is inclined toward displacement-based methods. One such widely used method is Direct-Displacement-Based Design (DDBD). Yet, one of the shortcomings of DDBD is considering higher-mode amplification of story shear, moments, and displacements using equations obtained from limited parametric studies of regular planar frames. In this paper, a different approach to account for higher-mode effects is proposed. This approach determines the lateral secant stiffness of the building frames that fulfill the allowable inter-story drift without exceeding the desired story displacements. Using the stiffness, an elastic response spectrum analysis is carried out to determine elastic higher-mode force effects. These force effects are then combined with DDBD-obtained first-mode force effects using the appropriate modal superposition method so that design can be performed. The proposed design procedure is verified using Nonlinear Time History Analysis (NTHA) of twelve planar frames in four categories accounting for mass and stiffness irregularity along the height. In general, the NTHA response outputs compared well with the allowable limits of the performance objective. Thus, it fulfills the aim of minimizing the use of NTHA for planar frame buildings, thereby saving computational resources and effort.
참고문헌 (18)
- Priestley MJN, "Myths and fallacies in earthquake engineering-conflicts between design and reality", Bulletin of the New Zealand National Society for Earthquake Engineering, 26(3), pp.329~341 (1993)
- Sullivan TJ, "The current limitation of displacement-based design", M.Sc, pp.2005
- Dynamic behavior of reinforced concrete frames designed with direct displacement-based design, "Pettinga JD", IUSS press, 162~, pp.Report No.: ROSE-2005 (2005), 02
- Displacement-based design methodology applied to RC Building frames, "Loeding S", UCSD, 296~, pp.Report No.: SSRP-98(06) (1998)
- Suarez V, "Evaluation of Displacement-Based Seismic Design of Reinforced Concrete Building Frames", Ph.D., pp.2014
- Amaris AD, "Dynamic amplification of seismic moments and shear forces in cantilever walls", M.Sc., pp.2002
- Sullivan TJ, "Direct displacement-based design of frame-wall structures", Journal of Earthquake Engineering, 10(01), pp.91~124 (2006)
- Cheng F, "Matrix Analysis of Structural Dynamics" (2000), Marcel Dekker
- Kowalsky MJ, "A displacement‐based approach for the seismic design of continuous concrete bridges", Earthquake engineering & structural dynamics, 31(3), pp.719~747 (2002)[DOI]
- Alvarez JC, "Displacement-based design of continuous concrete bridges under transverse seismic excitation", M.Sc., pp.2004
- Priestley MJN, "Displacement-Based Seismic Design of Structures", IUSS, 721~ (2007)
- MacGregor JG, "Reinforced concrete:Mechanics and design", pp.1151~ (1997), Prentice Hall
- Ali MM, "Structural developments in tall buildings: current trends and future prospects", Architectural Science Review, 50(3), pp.205~223 (2007)[DOI]
- "FEMA-356. Prestandard and commentary for the seismic rehabilitation of buildings", Federal Emergency Mangament Agency, ~ (2000)
- Kappos AJ, "Problems associated with direct displacement-based design of concrete bridges with singlecolumn piers, and some suggested improvements", Bulletin of Earthquake Engineering, 10(4), pp.1237~1266 (2012)[DOI]
- "FEMA P-1051. NEHRP recommended seismic provisions: design examples", Federal Emergency Mangament Agency, ~ (2016)
- Saleh Malekpour, "Application of the Direct Displacement Based Design Methodology for Different Types of RC Structural Systems", International Journal of Concrete Structures and Materials, 7(2), pp.135~153 (2013), 한국콘크리트학회[DOI]
- Karimzada NA, "Performance-based seismic design of reinforced concrete frame buildings: Direct Displacement-Based Approach", MSc, pp.2015