Stiffness Degradation Induced by Seismic Loading on a RC Shear Wall
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This research describes a quantitative procedure used to estimate the effect of concrete cracking on stiffness degradation of concrete shear walls and provides analytical references for the seismic design of concrete shear walls. As preliminary research on the seismic response of concrete shear walls, nonlinear transient analysis was performed with commercial FE software. The study presents the nonlinear time history analysis results in terms of concrete damage and cracking behavior induced by seismic input motions. By varying the input motions, concrete strength and shear wall thickness, the seismic responses of a shear wall were examined with nonlinear time history analysis, and the progressive cracking behavior and corresponding hysteresis loop were described. Based on the analysis results, frequency and stiffness degradation of the shear wall from progressive concrete damage and cracking were captured with respect to the seismic levels. The results of this study suggest that stiffness degradation from concrete cracking should be appropriately considered when determining the seismic capacity of RC shear wall structures.
Abstract
This research describes a quantitative procedure used to estimate the effect of concrete cracking on stiffness degradation of concrete shear walls and provides analytical references for the seismic design of concrete shear walls. As preliminary research on the seismic response of concrete shear walls, nonlinear transient analysis was performed with commercial FE software. The study presents the nonlinear time history analysis results in terms of concrete damage and cracking behavior induced by seismic input motions. By varying the input motions, concrete strength and shear wall thickness, the seismic responses of a shear wall were examined with nonlinear time history analysis, and the progressive cracking behavior and corresponding hysteresis loop were described. Based on the analysis results, frequency and stiffness degradation of the shear wall from progressive concrete damage and cracking were captured with respect to the seismic levels. The results of this study suggest that stiffness degradation from concrete cracking should be appropriately considered when determining the seismic capacity of RC shear wall structures.
참고문헌 (17)
- "ACI 349. Code Requirements for Nuclear Safety-related Concrete Structures and Commentary", American Concrete Institute, ~ (2001)
- Arel, H. Ş., "Ageing management and life extension of concrete in nuclear power plants", Powder Technology, 321, pp.390~408 (2017)
- "ASCE", SEI 43. (2005), Seismic Design Criteria for Structures, Systems and Components in Nuclear Facilities, 2005
- Choubey, R. K., "Effect of shear-span", depth ratio on cohesive crack and double-K fracture parameters of concrete, 2014, pp.2(3), 229~247
- DCD, "Design control document for the AP1000", U.S. Nuclear Regulatory Commission, ~ (2011)
- Habasaki, A., "Multi-Axial Loading Test for RC Wall of Reactor Building", SMiRT-15, H03, 1999
- Hiroshi, T., "Multi-Axis Loading Test on RC Shear Walls Overview and Outline of Two Directional Horizontal Loading Test", Transactions on SMiRT 16, ~ (2001)
- Kusama, K., "Simulation Analysis of Shaking Table Test for RC Seismic Shear Wall in Multi-Axis Loading Tests. SMiRT 17", ~ (2003)
- Mistri, A., "Condition assessment of fire affected reinforced concrete shear wall building–A case study", Advances in concrete construction, 4(2), pp.89~105 (2016)
- "NUREG", CR-6926, Evaluation of the Seismic Design Criteria in ASCE, U.S. Nuclear Regulatory Commission, pp.2007, ~
- Shojaei, F., "Seismic vulnerability assessment of low-rise irregular reinforced concrete structures using cumulative damage index", Advances in concrete construction, 5(4), pp.407~422 (2017)
- Sogbossi, H., "Impact of reinforcement-concrete interfaces and cracking on gas transfer in concrete", Construction and Building Materials, 157, pp.521~533 (2017)
- Syed, S., "Seismic fragility of RC shear walls in nuclear power plant part 2 : Influence of uncertainty in material parameters on fragility of concrete shear walls", Nuclear Engineering and Design, 295, pp.587~596 (2015)
- Torita, H., "Shaking table test of RC box-type shear wall in multi-axes loading", 13th World Conference on Earthquake Engineering (2004)
- US-APWR, "Design document. Seismic Design Bases of the US-APWR Standard Plant. MUAP-10001, Rev. 4", Mitsubishi Heavy Industries, Ltd, ~ (2011)
- Wang, S., "Analytical evaluation of the dome-cylinder interface of nuclear concrete containment subjected to internal pressure and thermal load", Engineering Structures, 161, pp.1~7 (2018)
- Zhou, Y., "Stochastic seismic response and stability reliability analysis of a vertical retaining wall in front of the pumping station of a nuclear power plant using the probability density evolution method", Nuclear Engineering and Design, 334, pp.110~120 (2018)