경계요소를 가진 철근콘크리트 전단벽의 비선형 해석을 위한 간편 모델
A Simple Model for the Nonlinear Analysis of an RC Shear Wall with Boundary Elements
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
경계요소를 가지는 철근콘크리트 전단벽의 비선형 해석을 위한 간편 모델을 제안하였다. 이 간편 모델은 전단벽의 휨 및 전단 거동을 스프링요소로 나타낸 거시적 모델이다. 휨거동은 벽체의 단면해석을 기초로 한 모멘트강도와 회전능력을 벽체 양단의 수직 스프링요소로 나타내었다. 경계요소를 가지는 전단벽은 휨거동에 의해 지배되므로 전단거동은 휨거동에 바탕하여 변수를 계산하였고 중앙부 수평 스프링요소로 나타내었다. 제안된 모델은 전단벽 정적이력시험 결과와 비교한 후 비선형동적해석을 수행하여 사용된 이력법칙 및 변수들의 타당성을 조사하였다. 비선형동적해석을 이용한 변수연구를 통하여 내진성능평가의 주요변수인 요구값과 성능값에 미치는 영향을 검토하였다. 그 결과 전단력-전단변형 관계에서 약간의 차이가 있지만 전단벽의 전체거동은 잘 일치하였으며, 주요 변수의 변화에 대해 요구값과 성능값도 일정하게 변화하므로 제안된 해석모델은 경계요소를 가진 철근콘크리트 전단벽에 알맞은 것으로 판단된다.
Abstract
A simple model for reinforced concrete shear walls with boundary elements is proposed, which is a macro-model composed of spring elements representing flexure and shear behaviors. The flexural behaviour is represented by vertical springs at the wall ends, where the moment strength and rotational capacity of the wall are based on section analysis. The shear behaviour is represented by a horizontal spring at the wall center, where the key parameters for the shear behavior are based on the flexural behaviour since the shear walls with boundary elements are governed by the flexure. The proposed model was prepared with the results of hysteretic tests of the shear walls, and then the reliability of the hysteretic rule and variables was investigated by nonlinear dynamic analyses. Using parametric study with nonlinear dynamic analyses, the effect of the variables on demand and capacity, which are major parameters in seismic performance evaluation, are investigated. Results show that the measured and calculated shear forces versus the shear distortion relationships are slightly different, but the global response is well simulated. Furthermore, the demand and capacity are also changed in a similar way to the change in the major parameters so that the proposed model may be appropriate for reinforced concrete shear walls with boundary elements.
참고문헌 (28)
- "FEMA 273, NEHRP guidelines for the seismic rehabilitation of buildings", Federal Emergency Management Agency, ~ (1997)
- "Element 10: A stiffness and strength degrading element developed for the SAC steel program, distributed with DRAIN-2DX by the National Information Service for Earthquake Engineering"[URL]
- DRAIN-2DX base program description and user guide – Version 1.10, "Prakash, V.", Structural Eng. Mechanics and Materials, Dept. of Civil Eng., Univ. of California, ~, pp.Report No. UCB (1993), SEMM-93[DOI]
- "Element 07: A stiffness-degrading/pinching element intended for reinforced concrete members, distributed with DRAIN-2DX by the National Information Service for Earthquake Engineering"[URL]
- Wallace, J.W., "Ductility and Detailing Requirements of Bearing Wall Buildings", Journal of Structural Engineering, ASCE, 118(6), pp.1625~1644 (1992)
- Wallace, J.W., "New Methodology for Seismic Design of Reinforced Concrete Shear Walls", Journal of Structural Engineering, ASCE, 120(3), pp.863~884 (2004)
- 대한건축학회, "건축구조기준 및 해설, KBC 2009", ~ (2009)
- "ACI 318, Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary (318R-08)", American Concrete Institute, ~ (2008)
- 강수민, "철근콘크리트 특수전단벽의 변위기초설계를 위한 항복변형성능 평가", 대한건축학회논문집 구조계, 26(10), pp.69~79 (2010), 대한건축학회
- Analytical models for predicting the lateral response of RC shear walls: Evaluation of their reliability, "Vulcano, A.", EERC, University of California, ~, pp.Report No. UCB (1987), EERC-87[DOI]
- Numerical modeling and capacity design of earthquake-resistant reinforced concrete walls, "Linde, P.", Institute of Structural Engineering, Swiss Federal Institute of Technology (ETH), ~, pp.Report No. 200 (1993)
- Kabeyasawa, T., "US-Japan cooperative research on R", C full-scale building test, Part 5: Discussion on dynamic response system, 1984, pp.6, 627~634
- Analytical modeling of R, "C structural walls", Vulcano, A., 1988, Report No. UCB[DOI]
- Orakcal, K., "Nonlinear modeling of RC structural walls", 7th US National Conference on Earthquake Engineering (2002)
- Hueste, M.B.D., "Evaluation of a four-story reinforced concrete building damaged during the Northridge Earthquake", Earthquake Spectra, 13(3), pp.387~414 (1997)
- Massone, L.M., "Load-deformation responses of slender reinforced concrete walls", ACI Structural Journal, 101(1), pp.103~113 (2004)
- Numerical modeling and parametric investigation of R, "C coupled wall-frame systems under seismic loading", Alama, M.S., 1992, Report UMCEE 92-20
- "ICC International building code", International Code Council Inc, ~ (2000)
- Kim, T.W., "Performance assessment of reinforced concrete structural walls for seismic loads, Structural Research Series - No. 634" (2004), Dept. of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign
- Kent, D.C., "Flexural members with confined concrete", Journal of Structural Division, ASCE, 97(7), pp.1969~1990 (1971)
- Mander, J.B., "Theoretical stress-strain model for confined concrete", Journal of Structural Engineering, ASCE, 114(8), pp.1804~1825 (1988)
- Burns, N.H., "Load-deformation characteristics of beam-column connections in reinforced concrete, Structural Research Series - No.234" (1962), Department of Civil Engineering, University of Illinois at Urbana-Champaign
- Otani, S., "Analysis of the full scale seven story reinforced concrete test structure, In Earthquake Effects on Reinforced Concrete Structures: US-Japan Research, SP-84" (1985), American Concrete Institute
- Hysteretic Behavior of Reinforced Concrete Framed Walls, "Wang, T.Y.", EERC, University of California, ~, pp.Report No. UCB (1975), EERC-75[DOI]
- Earthquake Resistant Structural Walls - Test of Isolated Walls, Report to National Science Foundation, "Oesterle, R.G.", Portland Cement Association, ~ (1976)
- Displacement-Based Design of Reinforced Concrete Structural Walls: An Experimental Investigation of Walls with Rectangular and T-Shaped Cross-Sections, "Thomsen, J.H.", Department of Civil and Environmental Engineering, Clarkson University, ~, pp.Report No. CU (1995), CEE-95[DOI]
- Development of ground motion time histories for phase 2 of the FEMA, "SAC steel project", Somerville, P., 1997, Report No. SAC[DOI]
- Luco, N., "Effects of random connection fractures on the demands and reliability for a 3-story pre-Northridge SMRF structure", Proc., 6th US National Conference on Earthquake Engineering (1998)