본문 바로가기
KERD
논문KCI 등재

트러스 이론을 이용한 철근 콘크리트 전단벽의 비선형 거동해석

Nonlinear Behavior Analysis of RC Shear Wall Using Truss Theory

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류안전공학

초록

최근 전단벽의 변형성능을 증명하기 위한 관심이 성능 설계법을 위한 적당한 자료들을 얻기 위해서 증대되고 있다. 본 연구에서는 전단벽의 변형 성능을 평가할수 있는 방법을 제시하고자 한다. 전단벽의 변위는 전단과 휨 변형의 조합된 형태로 표현될 수 있다. 수정 변환각 트러스 모델과 휨이론을 이용하여 전단과 휨변형을 산정하였으며, 또한 축력과 많은 수직 및 수평보강근의 영향을 고려할 수 있는 트러스 모델을 구축하였다. 본 연구에서 제안한 방법의 정확성을 평가하기 위하여 기 수행된 7개의 실험결과를 해석하고 실험결과와 해석결과를 비교하였다. 비교결과, 본 연구에서 제안한 방법을 사용함으로써 전단벽의 변형성능을 적절히 예측할 수 있는 것으로 나타났다. 그러나 플랜지벽이 있는 경우에는 강도와 강성의 측면에서 플랜지벽의 영향을 과대평가하며 변위성능의 측면에서는 과소평가하는 것으로 나타났다.

Abstract

Recently, a concern to verify the displacement capacity of shear wall has been arised to produce suitable data for the performance based design. In this paper, a process is presented to evaluate the displacement capacity of shear wall. The displacement of shear wall is expressed as the superposition of shear and flexural deformation. Variable crack angle truss model with a modification and sectional analysis method are used in calculating shear and flexural displacement, respectively. In addition, the effect of axial force and the contribution of vertical and horizontal reinforcements in wall are considered in the analysis. The accuracy of proposed method is evaluated by the comparison calculation results with previous test results. From the comparison, it was shown that the hysteretic behavior of shear wall could be well predicted by using the process. In the case with flange wall, however, the method overestimates the contribution of flange wall for strength and stiffness and underestimates for displacement capacity.

참고문헌 (10)

  1. "철근콘크리트 부재의 균열 후 강성이론", 11
  2. "벽식구조 아파트에서의 이형벽체 구조성능 평가실험" (2001)
  3. "Behavior of Reinforced Concrete Structural Walls", 87(3), pp.23~31
  4. "Seismic Design of Reinforced Concrete and Masonry Buildings", inc., pp.1992~
  5. "Coupling beams of reinforced concrete shear walls", proceedings of asce, pp.~1971
  6. "Analytical model for predicting shear strength of squat wall", pp.~2001
  7. "UCFYBER:Cross Section Analysis Software for Structural Engineers" (1999), University of California
  8. "Analytical model for predicting shear strength of interior reinforced concrete beam-column joints for seismic resistance", 97(1), pp.35~44
  9. "Analytical model for predicting shear strengths of Exterior reinforced concrete beam-column joints for seismic resistance", 96(5), pp.846~857
  10. "Analytical model for predicting shear strengths of Exterior reinforced concrete beam-column joints for seismic resistance", 96(5), pp.846~857

관련 논문AI추천

이 간행물의 다른 논문 (8건)