비보강 조적식 구조의 형상에 따른 내진성능 평가 해석
Effect of Physical Shape on Seismic Performance of URM Structures
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Unreinforced masonry (URM) buildings are known to be highly vulnerable to seismic loadings. Although significant physical variation may exist for URM buildings that fall into a same structural category, a single set of fragility curves is typically used as a representation of the seismic vulnerability of the URM structures. This study investigates the effect of physical variation of URM structures on their seismic performance level. Variables that describe the physical variation of the structure are defined based on the inventory analysis. Seismic behavior of the structures is then monitored by changing the variables to investigate the effect of each variable. The analysis results show that among the variables considered the seismic performance of URM building depends on the variation of the width, the aspect ratio, and the number of story. The need for further research on the modeling of the connections between the walls and diaphragms and the torsional effect is also addressed.
Abstract
Unreinforced masonry (URM) buildings are known to be highly vulnerable to seismic loadings. Although significant physical variation may exist for URM buildings that fall into a same structural category, a single set of fragility curves is typically used as a representation of the seismic vulnerability of the URM structures. This study investigates the effect of physical variation of URM structures on their seismic performance level. Variables that describe the physical variation of the structure are defined based on the inventory analysis. Seismic behavior of the structures is then monitored by changing the variables to investigate the effect of each variable. The analysis results show that among the variables considered the seismic performance of URM building depends on the variation of the width, the aspect ratio, and the number of story. The need for further research on the modeling of the connections between the walls and diaphragms and the torsional effect is also addressed.
참고문헌 (11)
- National Institute of Building Science, "HAZUS-MH MR3Multi-Hazard Loss Estimation Methodology: Earthquake Model, Technical Manual", ~ (2003)
- Park J, "Rapid seismic damage assessment of railway bridges using the response-surface statistical model", Structural Safet, 47(2), pp.1~12 (2014)
- Seo J, "Use of response surface metamodels to generate systems level fragilities for existing curved steel bridges", Engineering Structures, 52, pp.642~653 (2013)
- Inventory of Essential Facilities in Mid-America. Mid-America Earthquake Center Project SE-1 Final Report, "French S", ~ (2000)
- Park J, "Seismic fragility analysis of low-rise unreinforced masonry structures", Engineering Structures, 31(1), pp.125~137 (2009)
- ASCE, "FEMA 356. Prestandard and commentary for the seismic rehabilitation of buildings" (2000), Federal Emergency Management Agency
- Response modification applications for essential facilities, Mid-America Earthquake Center Project ST-4 Final Report, "Craig JI", ~ (2002)
- Prestandard and Commentary for the Seismic Rehabilitation of Buildings, "Federal Emergency Management Agency", ~, pp.Report 356 (2000)
- ABAQUS, "ABAQUS documentation, Dassault Systemes", ~ (2011)
- Wen YK, "Uniform hazard ground motions for Mid-America cities", Earthquake Spectra, 17(2), pp.359~384 (2001)
- Prakash V, "DRAIN-2DX base program description and user guide. Ver. 1.10" (1993), Department of Civil Engineering, University of California