반복하중을 받는 대각보강 콘크리트 연결보의 이력거동 예측을 위한 매개변수 결정방법
Calibration of Parameters for Predicting Hysteretic Behavior of Diagonally Reinforced Concrete Coupling Beams
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The coupled shear wall system with coupling beams is an efficient structural system for high-rise buildings because it can provide excellent ductility and energy dissipation to the buildings. The objective of this study is to simulate the hysteretic behavior of diagonally reinforced concrete coupling beams including pinching and cyclic deteriorations in strength and stiffness using a numerical model. For this purpose, coupling beams are modeled with an elastic beam element and plastic spring element placed at the beam ends. Parameters for the analytical model was calibrated based on the test results of 6 specimens for diagonally reinforced concrete coupling beams. The analytical model with calibrated model parameters is verified by comparing the hysteretic curves obtained from analysis and experimental tests.
Abstract
The coupled shear wall system with coupling beams is an efficient structural system for high-rise buildings because it can provide excellent ductility and energy dissipation to the buildings. The objective of this study is to simulate the hysteretic behavior of diagonally reinforced concrete coupling beams including pinching and cyclic deteriorations in strength and stiffness using a numerical model. For this purpose, coupling beams are modeled with an elastic beam element and plastic spring element placed at the beam ends. Parameters for the analytical model was calibrated based on the test results of 6 specimens for diagonally reinforced concrete coupling beams. The analytical model with calibrated model parameters is verified by comparing the hysteretic curves obtained from analysis and experimental tests.
참고문헌 (19)
- Naish D, "Reinforced Concrete Coupling Beams Part1 : Testing", ACI Structural Journal, 110(6), pp.1057~1066 (2013)
- Vu NS, "Effective Stiffness of Reinforced Concrete Coupling Beams", Engineering Structures, 76, pp.371~382 (2014)
- Paulay T, "Coupling Beams of Reinforced Concrete Shear Walls", Journal of the Structural Division, 97(3), pp.843~862 (1971)
- Paulay T, "Diagonally Reinforced Coupling Beams of Shear Walls", pp.579~598 (1974), ACI
- Tassios TP, "On the Behavior and Ductility of Reinforced Concrete Coupling Beams of Shear Walls", ACI Structural Journal, 93(6), pp.711~720 (1996)
- Galano L, "Seismic Behavior of Short Coupling Beams with Different Reinforcement Layouts", ACI Structural Journal, 97(6), pp.876~885 (2000)
- Fortney PJ, "Investigation on Effect of Transverse Reinforcement on Performance of Diagonally Reinforced Coupling Beams", ACI Structural Journal, 105(6), pp.781~788 (2008)
- Wallace JW, "Modeling Issues for Tall Reinforced Core Wall Buildings", Structural Design of Tall and Special Buildings, 16(5), pp.615~632 (2007)
- Analytical Modeling of Reinforced Concrete Walls for Predicting Flexural and Coupled-Shear-Flexural Responses, "Orakcal K", Pacific Earthquake Engineering Research Center, ~ (2006)
- Barbachyn SM, "Analytical Evaluation of Diagonally Reinforced Concrete Coupling Beams under Lateral Loads", ACI Structural Journal, 109(4), pp.497~507 (2012)
- Hindi RA, "Shear Capacity of Diagonally Reinforced Coupling Beams", Engineering Structures, 26(10), pp.1437~1446 (2004)
- Lim E, "Cyclic Tests of Reinforced Concrete Coupling Beam with Intermediate Span-Depth Ratio", ACI Structural Journal, 113(3), pp.515~524 (2016)
- Lignos DG, "Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading", Journal of Structural Engineering, 137(11), pp.1291~1302 (2011)
- "OpenSees. software" (2010)[URL]
- Lowes LN, "Modeling Reinforced-Concrete Beam-Column Joints Subjected to Cyclic Loading", Journal of Structural Engineering, 129(12), pp.1686~1697 (2003)
- ACI Committee 318, "Building Code Requirements for Structural Concrete and Commentary", American Concrete Institute, ~ (2014)
- Han SW, "Cyclic Performance of Precast Coupling Beams with Bundled Diagonal Reinforcement", Engineering Structures, 93, pp.142~151 (2015)
- The Effects of Strength and Stiffness Degradation on Seismic Response, "Federal Emergency Management Agency", ~ (2009)
- Lignos DG, "Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading", Journal of Structural Engineering, 137(11), pp.1291~1302 (2011)