응답스펙트럼을 활용한 감쇠장치 예비 설계절차 제시
Preliminary Design Procedure for Practical Application of Dampers Using Earthquake Response Spectrum
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
n this study, a design procedure for the practical application of the dampers to building structures under earthquake loads was presented by using earthquake response spectrum. Nonlinear time history results using a 10 story building structure installed with damper verified the effectiveness of the proposed procedure by showing that the structural response could be reduced to the target performance level for seismic loads. Since the proposed design procedures are based on response spectrum seismic analysis result of the original structure, the capacity, location and the number of damper and the consequent response reduction effects can be preliminarily determined without performing the nonlinear time history analysis.
Abstract
n this study, a design procedure for the practical application of the dampers to building structures under earthquake loads was presented by using earthquake response spectrum. Nonlinear time history results using a 10 story building structure installed with damper verified the effectiveness of the proposed procedure by showing that the structural response could be reduced to the target performance level for seismic loads. Since the proposed design procedures are based on response spectrum seismic analysis result of the original structure, the capacity, location and the number of damper and the consequent response reduction effects can be preliminarily determined without performing the nonlinear time history analysis.
참고문헌 (9)
- Kasai K, "Peak response prediction rule for a SDOF elasto-plastic system based on equivalent linearization technique", Journal of Structural Constructure Engineering, 571, pp.53~62 (2003)
- Filiatrault A, "Seismic design spectra for friction-damped structures", Journal of Structural Engineering, 116(5), pp.1334~1355 (1990)
- 이상현, "건축구조물의 층전단력 분포에 기초한 마찰감쇠기의 최적설계", 한국지진공학회논문집, 9(6), pp.21~30 (2005), 한국지진공학회
- Miguel LFF, "Simultaneous optimization of force and placement of friction dampers under seismic loading", Engineering Optimization, 48(4), pp.582~602 (2016)
- Nabid N, "A practical method for optimum seismic design of friction wall dampers", Earthquake Spectra (2017)
- Ben-Haim, "Convex models of uncertainty in applied mechanics" (1990), Elsevier
- Wu Z, "Design spectra for actively controlled structures based on convex models", Engineering Structures, 18(5), pp.341~350 (1996)
- Shinozuka M, "Maximum structural response to seismic excitations", Journal of Engineering Mechanics, 96, pp.729~738 (1970)
- 노지은, "감쇠장치를 사용한 경주지진과 유사한 특성을 가지는 지반가속도로 가진된 단주기구조물 내진성능보강", 한국지진공학회논문집, 20(7), pp.503~508 (2016), 한국지진공학회