마찰복원형 지진격리장치가 설치된 케이블교량의 성능기반 내진설계법 개선(II-내진설계 절차 제안)
Improvement of the Performance Based Seismic Design Method of Cable Supported Bridges with Resilient-Friction Base Isolation Systems (II-Proposal for the Seismic Design Procedure)
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In a previous paper, ambient vibration tests were conducted on a cable stayed bridge with resilient-friction base isolation systems (R-FBI) to extract the dynamic characteristics of the bridge and compare the results with a seismic analysis model. In this paper, a nonlinear seismic analysis model was established for analysis of the bridge to compare the difference in seismic responses between nonlinear time history analysis and multi-mode spectral analysis methods in the seismic design phase of cable supported bridges. Through these studies, it was confirmed that the seismic design procedures of the “Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges” is not suitable for cable supported bridges installed with R-FBI. Therefore, to reflect the actual dynamic characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure is proposed that applies the seismic analysis method differently depending on the seismic isolation effect of the R-FBI for each seismic performance level.
Abstract
In a previous paper, ambient vibration tests were conducted on a cable stayed bridge with resilient-friction base isolation systems (R-FBI) to extract the dynamic characteristics of the bridge and compare the results with a seismic analysis model. In this paper, a nonlinear seismic analysis model was established for analysis of the bridge to compare the difference in seismic responses between nonlinear time history analysis and multi-mode spectral analysis methods in the seismic design phase of cable supported bridges. Through these studies, it was confirmed that the seismic design procedures of the “Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges” is not suitable for cable supported bridges installed with R-FBI. Therefore, to reflect the actual dynamic characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure is proposed that applies the seismic analysis method differently depending on the seismic isolation effect of the R-FBI for each seismic performance level.
참고문헌 (16)
- 길홍배, "마찰복원형 지진격리장치가 설치된 케이블교량의 성능기반 내진설계법 개선(I-실 교량 실험 결과 분석)", 한국지진공학회논문집, 24(4), pp.157~167 (2020), 한국지진공학회[DOI]
- Ministry of Land, Infrastructure and Transportation, "Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges", ~ (2016)
- Ali HM, "Seismic energy dissipation for cablestayed bridges using passive devices", Earthquake Engineering and Structural Dynamics, 23(8), pp.877~893 (1994)
- AASHTO, "Design procedures for seismically isolated bridge", Dynamic Isolation System, Inc, ~ (1994)
- 신영석, "지진격리장치를 갖는 PSC I형 거더교량의 지진거동 특성 및 경제성 분석", 한국전산구조공학회논문집, 21(2), pp.145~151 (2008), 한국전산구조공학회
- Ha DH, "Earthquake response characteristics of seismically isolated bridges with frictional bearings", KSCE Journal of Civil Engineering, 20(6-A), pp.937~944 (2000)
- 유성문, "ICT센터 사례 연구를 통한 EQS의 건축 구조물 면진에 의 적용 연구", 한국지진공학회논문집, 17(2), pp.61~70 (2013), 한국지진공학회
- 김범수, "EQS 면진장치의 항복 후 강성을 고려한 면진 원전구조물의 지진응답", 한국지진공학회논문집, 20(5), pp.319~329 (2016), 한국지진공학회
- 박형기, "폴리우레탄 스프링 복원형 디스크 받침의 동적거동에 대한 실험 및 해석적 연구", 한국지진공학회논문집, 15(2), pp.61~69 (2011), 한국지진공학회
- Asgari B, "Application of isolation systems in the seismic control of cable-stayed bridges : A state-of-the-art review. Latest Trends on Engineering Mechanics, Structures, Engineering Geology", International Conference on Geography and Geology (2010)
- 이유인, "원전 EQS 면진장치의 성능개선을 위한 연구", 한국지진공학회논문집, 19(1), pp.13~19 (2015), 한국지진공학회
- AASHTO, "Guide Specifications for Seismic Isolation Design (third editoin)", ~ (2010)
- Bang IS, "Experiences of Sliding Disk Bearing in Korea", 7th World Congress on Joints Bearings and Seismic Systems for Concrete Structures (2011)
- MidasIT Co, "Analysis Reference", ~
- Park YJ, "Random vibration of hysteretic systems under bi-directional ground motions", The Journal of the International Association for Earthquake Engineering, 14(4), pp.543~557 (1986)
- Cho YW, "A systematic approach to the geometric control (construction engineering) for long span cablestayed bridges", Korean Society of Steel Construction, pp.68~76 (2011)