유한요소해석을 활용한 비구조 조적벽의 면외방향 설계
Design for Out-of-Plane Direction of Nonstructural Masonry Walls Using Finite Element Analysis
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study proposed a simplified finite element analysis procedure for designing the nonstructural masonry wall in the out-of-plane direction. The proposed method is a two-step elastic analysis procedure by bilinearizing the behavior of the masonry wall. The first step analysis was conducted with initial stiffness representing the behavior up to the effective-yield point, and the second step analysis was conducted with post-yield stiffness. In addition, the orthotropic material property of the masonry was considered in the FE analysis. The maximum load was estimated as the sum of the maximum loads in the first and second step analyses. The maximum load was converted into the moment coefficients and compared with those from the yield line method applied in Eurocode 6. The moment coefficients calculated through the proposed procedure showed a good match with those from the yield line method with less than 6% differences.
Abstract
This study proposed a simplified finite element analysis procedure for designing the nonstructural masonry wall in the out-of-plane direction. The proposed method is a two-step elastic analysis procedure by bilinearizing the behavior of the masonry wall. The first step analysis was conducted with initial stiffness representing the behavior up to the effective-yield point, and the second step analysis was conducted with post-yield stiffness. In addition, the orthotropic material property of the masonry was considered in the FE analysis. The maximum load was estimated as the sum of the maximum loads in the first and second step analyses. The maximum load was converted into the moment coefficients and compared with those from the yield line method applied in Eurocode 6. The moment coefficients calculated through the proposed procedure showed a good match with those from the yield line method with less than 6% differences.
참고문헌 (16)
- "KDS 41 17 00. Seismic Building Design Code", Korea Construction Standards Center, ~ (2019)
- Milani G, "Homogenization approach for the limit analysis of out-of-plane loaded masonry walls", J Struct Eng(N Y), 132(10), pp.1650~1663 (2006)
- 김충만, "채움벽 두께에 따른 철근콘크리트 조적채움벽 골조의 면내하중에 대한 유한요소해석", 한국전산구조공학회논문집, 29(1), pp.85~93 (2016), 한국전산구조공학회[DOI]
- "KDS 41 34 03. General Design of Masonry Structure", Korea Construction Standards Center, ~ (2019)
- "KDS 41 34 04. Allowable Stress Design of Masonry Structure", Korea Construction Standards Center, ~ (2016)
- "KDS 41 34 05. Strength Design of Masonry Structure", Korea Construction Standards Center, ~ (2016)
- "KDS 41 34 06. Empirical Design of Masonry Structure", Korea Construction Standards Center, ~ (2016)
- MSJC, "Specification for Masonry Structures (TMS 602-11", ACI 530.1-11, The Masonry Society, Boulder, Colorado, the American Concrete Institute, Farmington Hills, Michigan, and the American Society of Civil Engineers, pp.2011, ~
- "EN, BSIBS. 1-1: Eurocode 6: design of masonry structures. General rules for reinforced and unreinforced masonry structures", CEN, ~ (2005)
- Fried A, "Concrete masonry designer’s handbook" (2014), CRC Press
- Vaculik J, "Unreinforced masonry walls subjected to out-of-plane seismic actions", ~ (2012)
- Johansen KW, "Yield-line formulae for slabs" (1972), CRC Press
- Baker LR, "Flexural behaviour of masonry panels-a State of the Art", In Australia, 27~55 (1985)
- Moreno-Herrera J, "Outof-plane design procedure for confined masonry walls", J Struct Eng (N Y), 142(2), pp.04015126~ (2016)
- Lourenço PB, "Continuum model for masonry : Parameter estimation and validation", J Struct Eng(N Y), 124(6), pp.642~652 (1998)
- ASTM International, "ASTM E518", E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry, 2010