적층방향에 따른 3D프린팅 콘크리트의 면내 및 면외 구조성능 평가 연구
In-Plane and Out-of-Plane Test and FEM Analysis of 3D Printing Concrete Specimens According to Stacking Direction
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, the structural performance of the specimen fabricated through 3D printing was evaluated through monotonic loading experiments analysis to apply to 3D printed structures. The compression and flexural experiments were carried out, and the experimental results were compared to the finite element model results. The loading directions of specimens were investigated to consider the capacity of specimens with different curing periods, such as 7 and 28 days. As a result, the strength tended to increase slightly depending on the stacking direction. Also, between the 3D-printed panel composite and the non-reinforced panel, the bending performance depended on the presence or absence of composite reinforcement.
Abstract
In this study, the structural performance of the specimen fabricated through 3D printing was evaluated through monotonic loading experiments analysis to apply to 3D printed structures. The compression and flexural experiments were carried out, and the experimental results were compared to the finite element model results. The loading directions of specimens were investigated to consider the capacity of specimens with different curing periods, such as 7 and 28 days. As a result, the strength tended to increase slightly depending on the stacking direction. Also, between the 3D-printed panel composite and the non-reinforced panel, the bending performance depended on the presence or absence of composite reinforcement.
참고문헌 (14)
- Development of innovative design, material and equipment for 3D printing small buildings, "freeform members", Lee SM, 2021
- de Laubier R, "Will 3D Printing Remodel the Construction Industry" (2018), The Boston Group
- European Construction Sector Observatory, "Trend paper series, intergrating digital innovations in the construction sector", European Commission, ~ (2019)
- 정석재, "3D프린팅 기술의 건축분야 활용 동향과 경제성에 관한 연구", 한국산학기술학회논문지, 15(10), pp.6336~6343 (2014), 한국산학기술학회[DOI]
- 2017 3D printing industry status and trend analysis, "Korea Association for ICT Promotion", Ministry of Science and ICT, ~ (2017)
- Joh C, "Buildability and Mechanical Properties of 3D Printed Concrete", Materials, 13(21), pp.4919~ (2020)
- "The first 3D printed house with earth GAIA"[URL]
- cube specimens), , 2020
- "ASTM C1314. Standard test method for compressive strength of masonry prisms, American society for testing and materials", ~ (2009)
- "ASTM C1609. Standard test method for flexural performance fiber-reinforced concrete (using beam with third-point lodaing)", ~ (2009)
- "BS EN 1052-3. Method of test for masonry-part 3: determination of initial shear strength", ~ (2002)
- "ASTM C293. Standard test method for flexural strength of concrete (using simple beam with center-point lodaing)", ~ (2002)
- 문아해, "CFT기둥과 합성보로 구성된 CJS합성구조시스템의 유한요소해석 연구", 한국지진공학회논문집, 26(2), pp.71~82 (2022), 한국지진공학회[DOI]
- "LS-DYNA keyword user’s manual volume 2 material models", Livermore software technology corporation(LSTC), ~ (2012)