굵은 골재를 이용한 3D 콘크리트 프린팅 기술개발에 대한 연구
Investigation on the Development of 3D Concrete Printing(3DPC) Technology Using Coarse Aggregation
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.
Abstract
Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.
참고문헌 (33)
- Agustí-Juan, I, "Potential benefits of digital fabrication for complex structures: environmental assessment of a robotically fabricated concrete wall", Journal of Cleaner Production, 154, pp.330~340 (2017)
- Bock, T, "The future of construction automation: Tech-nological disruption and the upcoming ubiquity of robotics", Automation, Construction, 59, pp.113~121 (2015)
- Buchli, J, "Digital in situ fabrication - challenges and opportunities for robotic in situ fabrication in architecture, construction, and beyond", Cement and Concrete Research, 112, pp.66~75 (2018)
- Buswell, R.A, "3D printing using concrete extrusion:A roadmap for research, construction, and beyond", Cement and Concrete Research, 112, pp.37~49 (2018)
- Buswell, R.A, "Freeform construction: Mega-scale rapid manufacturing for construction", Automation in Construction, 16(2), pp.224~231 (2007)
- Chen, M, "Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials", Construction and Building Materials, 189, pp.601~611 (2018)
- Espinosa, R.M, "Influence of the age and drying process on pore structure and sorption isotherms of hardened cement paste", Cement and Concrete Research, 36(10), pp.1969~1984 (2006)
- García de Soto, B, "Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall", Automation, Construction, 92, pp.297~311 (2018)
- Hamidi, F, "Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges", Construction and Building Materials, 218, pp.582~609 (2019)
- 황준필, "수중적층용 3D 콘크리트 프린팅 장비 개발에 대한 연구", 한국산업경영시스템학회지, 44(3), pp.10~21 (2021), 한국산업경영시스템학회
- Ji, G, "A 3D printed ready-mixed concrete power distribution substation: Materials and construction technology", Materials, 12(9), pp.1~14 (2019)
- Jiao, D, "Effect of constituents on rheological properties of fresh concrete: A review", Cement and Concrete Composites, 83, pp.146~159 (2017)
- Khoshnevis, B, "Automated Construction by Contour Crafting-Related Robotics and Information Technologies", Automation in Construction, 13(1), pp.5~19 (2004)
- Kwon, H.K, "Experimentation and analysis of Contour Crafting (CC) process using ceramic materials", pp.2002
- Le, T.T, "Hardened properties of high-performance printing concrete", Cement and Concrete Research, 42(3), pp.558~566 (2012)
- Lee, H. J, "Evaluation of the Mechanical Properties of a 3D-Printed Mortar", Materials, 12(24), pp.1~13 (2019)
- 이호재, "적층공법을 적용한 시멘트계 복합재료의 수축특성", 한국구조물진단유지관리공학회 논문집, 23(6), pp.99~104 (2019), 한국구조물진단유지관리공학회
- 이호재, "3D 프린팅 공법 적용을 위한 모르타르 구성성분 변화에 따른 레올로지 특성 연구", 한국건설순환자원학회 논문집, 6(1), pp.16~24 (2018), 한국건설순환자원학회[DOI]
- Li, X, "Preparation and microstructural characterization of a novel 3D printable building material composed of copper tailings and iron tailings,", Construction and Building Materials, 249, pp.1~11 (2020)
- Lim, J.H, "3D printing of curved concrete surfaces using Adaptable Membrane Formwork", Construction and Building Materials, 232, pp.1~10 (2020)
- Lim, S, "Developments in constructionscale additive manufacturing processes", Automation in Construction, 21, pp.262~268
- Liu, D.Y, "Freeze-thaw damage evaluation and model creation for concrete exposed to freeze-thaw cycles at early-age", Cement and Concrete Research, 312, pp.1~13 (2021)
- Ma, G, "Printable properties of cementitious material containing copper tailings for extrusion based 3D printing", Construction and Building Materials, 162, pp.613~627 (2018)
- Ma, G.W, "State-of-the-art of 3D printing technology of cementitious material: An emerging technique for construction", Science China Technological Sciences, 61(4), pp.475~495 (2018)
- Mechtcherine, V, "Testing pumpability of concrete using sliding pipe rheometer", Construction and Building Materials, 53, pp.312~323 (2014)
- Mechtcherine, V, "Large-scale digital concrete construction - CONPrint3D concept for on-site, monolithic 3D-printing", Automation in Construction, 107, pp.1~16 (2019)
- Paul, S.C, "A review of 3D concrete printing systems and materials properties: current status and future research prospects", Rapid Prototyping Journal, 24(4), pp.784~798 (2018)
- Rahul, A.V, "Evaluating the printability of concretes containing lightweight coarse aggregates", Cement and Concrete Composites, 109, pp.1~11 (2020)
- Roussel, N, "Rheological requirements for printable concretes", Cement and Concrete Research, 112, pp.76~85 (2018)
- Tay, Y.W.D, "Printability region for 3D concrete printing using slump and slump flow test", Composites Part B: Engineering, 174, pp.1~9 (2019)
- "Labor-productivity declines in the construction industry: Causes and remedies (Another Look)"[URL]
- Wangler, T, "Digital concrete: A review", Cement and Concrete Research, 123, pp.1~17 (2019)
- Woo, S.J, "Comparison of Properties of 3D-Printed Mortar in Air vs. Underwater", Materials, 14(19), pp.1~19 (2021)