기계학습기반 기둥 파괴유형 분류모델을 활용한 학교건축물의 내진보강전략 구축
Machine Learning-Based Retrofit Scheme Development for Seismically Vulnerable Reinforced Concrete School Buildings
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Many school buildings are vulnerable to earthquakes because they were built before mandatory seismic design was applied. This study uses machine learning to develop an algorithm that rapidly constructs an optimal reinforcement scheme with simple information for non-ductile reinforced concrete school buildings built according to standard design drawings in the 1980s. We utilize a decision tree (DT) model that can conservatively predict the failure type of reinforced concrete columns through machine learning that rapidly determines the failure type of reinforced concrete columns with simple information, and through this, a methodology is developed to construct an optimal reinforcement scheme for the confinement ratio (CR) for ductility enhancement and the stiffness ratio (SR) for stiffness enhancement. By examining the failure types of columns according to changes in confinement ratio and stiffness ratio, we propose a retrofit scheme for school buildings with masonry walls and present the maximum applicable stiffness ratio and the allowable range of stiffness ratio increase for the minimum and maximum values of confinement ratio. This retrofit scheme construction methodology allows for faster construction than existing analysis methods.
Abstract
Many school buildings are vulnerable to earthquakes because they were built before mandatory seismic design was applied. This study uses machine learning to develop an algorithm that rapidly constructs an optimal reinforcement scheme with simple information for non-ductile reinforced concrete school buildings built according to standard design drawings in the 1980s. We utilize a decision tree (DT) model that can conservatively predict the failure type of reinforced concrete columns through machine learning that rapidly determines the failure type of reinforced concrete columns with simple information, and through this, a methodology is developed to construct an optimal reinforcement scheme for the confinement ratio (CR) for ductility enhancement and the stiffness ratio (SR) for stiffness enhancement. By examining the failure types of columns according to changes in confinement ratio and stiffness ratio, we propose a retrofit scheme for school buildings with masonry walls and present the maximum applicable stiffness ratio and the allowable range of stiffness ratio increase for the minimum and maximum values of confinement ratio. This retrofit scheme construction methodology allows for faster construction than existing analysis methods.
참고문헌 (35)
- Choi I, "Optimal retrofit quantity of exterior steel brace methods on minimizing seismic loss for non-ductile reinforced concrete school buildings in Korea", Bull Earthquake Eng, 22, pp.1055~1079 (2023)
- O’Reilly GJ, "Seismic assessment and loss estimation of existing school buildings in Italy", Engineering Structures, 168, pp.142~162 (2018)
- Al-Bukhaiti K, "Effect of the axial load on the dynamic response of the wrapped CFRP reinforced concrete column under the asymmetrical lateral impact load", PLoS One, 18(6) (2023)
- Shin J, "Numerical column model for damaged non-ductile reinforced concrete frame repaired using FRP jacketing system", J Earthq Eng Soc Korea, 22(5), pp.291~298 (2018)
- Kim KM, "Seismic Performance Evaluation of Existing Low-rise RC Frames with Non-seismic Detail", J Earthq Eng Soc Korea, 17(3), pp.97~105 (2013)
- Shin J, "Forced vibration testing of full-scale non-seismic reinforced concrete frame structure retrofitted using FRP jacketing system", J Earthq Eng Soc Korea, 22(5), pp.281~289 (2018)
- Shin KJ, "Seismic-strengthening effect of steel shear wall with circular opening through shaking table test on reinforced concrete frame", The Regional Association of Architectural Institute of Korea, 18(2), pp.107~114 (2016)
- Wang Y, "Experimental and numerical investigations of the seismic performance of reinforced concrete frames strengthened with CFRP sheets", Buildings, 13(9), pp.2195~ (2023)
- Shin J, "Dynamic response of a full-scale reinforced concrete building frame retrofitted with FRP column jackets", Engineering Structures, 125, pp.244~253 (2016)
- Song MA, "Seismic Performance Evaluation of the Low-Rise Buildings with Different Seismic Retrofit Procedures", J Earthq Eng Soc Korea, 20(7_spc), pp.553~560 (2016)
- Ozkul TA, "Effect of shear wall on seismic performance of RC frame buildings", Eng Fail Anal, 100, pp.60~75 (2019)
- Berry M, "PEER structural performance database user’s manual (version 1.0)", University of California, ~ (2004)
- Yoshikawa H, "Modeling of Inelastic Behavior of RC Structures Under Seismic Loads", pp.35~368 (2001), American Society of Civil Engineers
- Sezen H, "Shear strength model for lightly reinforced concrete columns", J Struct Eng, 130(11), pp.1692~1703 (2004)
- Sheikh SA, "Flexural behavior of confined concrete columns", Journal Proceedings, 83(3), pp.389~404 (1986)
- Mo YL, "Seismic behavior of RC columns with various tie configurations", J Struct Eng, 126(10), pp.1122~1130 (2000)
- Priestley MJ, "Strength and ductility of concrete bridge columns under seismic loading", Structural Journal, 84(1), pp.61~76 (1987)
- Bažant ZP, "Failure of slender and stocky reinforced concrete columns : Tests of size effect", Materials and Structures, 27, pp.79~90 (1994)
- Behavior of RC Columns and Composite Columns using High Strength Concrete, "Korea Road Research Institute", Korea Expressway Corporation, ~ (1999)
- Shi Q, "Seismic performance of square concrete columns reinforced with grade 600 MPa longitudinal and transverse reinforcement steel under high axial load", Structures, 32, pp.1955~1970 (2021)
- Mo YL, "Seismic behavior of RC columns with various tie configurations", J Struct Eng, 126(10), pp.1122~1130 (2000)
- Wang X, "Experimental investigation on the effect of reinforcement ratio to capacity of RC column to resist lateral impact loading", Systems Engineering Procedia, 1, pp.35~41 (2011)
- Grgić N, "The shake-table study of the effect of longitudinal reinforcement ratio on the behavior of concrete cantilever columns : Rütteltischuntersuchung über den Einfluss des Längsbewehrungsverhältnisses auf das Verhalten von Betonkragarmen", Materialwissenschaft und Werkstofftechnik, 49(5), pp.606~618 (2018)
- Karaton M., "Numerical investigation of the effect on ultimate loading capacity of different longitudinal reinforcement ratios of a RC portal frame", J Struct Eng, 1(3), pp.147~154 (2018)
- Kim S, "Machine Learning-Based Rapid Prediction Method of Failure Mode for Reinforced Concrete Column", J Earthq Eng Soc Korea, 28(2), pp.113~119 (2024)
- Mirmiran A, "Effect of column parameters on FRP-confined concrete", Journal of Composites for construction, 2(4), pp.175~185 (1998)
- Spoelstra MR, "FRP-confined concrete model", Journal of composites for construction, 3(3), pp.143~150 (1999)
- Shin J, "Seismic damage mitigation strategy using an FRP column jacketing system in gravity-designed reinforced concrete building frames", Composite Structures, 279, pp.114700~ (2022)
- Fam AZ, "Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes", Structural Journal, 98(4), pp.451~461 (2001)
- Popovics S, "A numerical approach to the complete stress-strain curve of concrete", Cement and concrete research, 3(5), pp.583~599 (1973)
- Mander JB, "Theoretical stress-strain model for confined concrete", J Struct Eng, 114(8), pp.1804~1826 (1988)
- Richart FE, "A study of the failure of concrete under combined compressive stresses", Univ. of Illinois, Eng. Experimental Station, (185) (1928)
- Gardner NJ, "Triaxial behavior of concrete", ACI L, 66(2), pp.136~146 (1969)
- Shin J, "Seismic mobile shaker testing of full-scale RC building frames with high-strength NSM-FRP hybrid retrofit system", Composite Structures, 226, pp.111207~ (2019)
- Fiorato AE, "An investigation of the interaction of reinforced concrete frames with masonry filler walls", pp.1971