CFT기둥과 합성보로 구성된 CJS합성구조시스템의 유한요소해석 연구
Finite Element Analysis Study of CJS Composite Structural System with CFT Columns and Composite Beams
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper presents the effect on the inelastic behavior and structural performance of concrete and filled steel pipe through a numerical method for reliable judgment under various load conditions of the CJS composite structural system. Variable values optimized for the CJS synthetic structural system and the effects of multiple variables used for finite element analysis to present analytical modeling were compared and analyzed with experimental results. The Winfrith concrete model was used as a concrete material model that describes the confinement effect well, and the concrete structure was modeled with solid elements. Through geometric analysis of shell and solid elements, rectangular steel pipe columns and steel elements were modeled as shell elements. In addition, the slip behavior of the joint between the concrete column and the rectangular steel pipe was described using the Surface-to-Surface function. After finite element analysis modeling, simulation was performed for cyclic loading after assuming that the lower part of the foundation was a pin in the same way as in the experiment. The analysis model was verified by comparing the calculated analysis results with the experimental results, focusing on initial stiffness, maximum strength, and energy dissipation capability.
Abstract
This paper presents the effect on the inelastic behavior and structural performance of concrete and filled steel pipe through a numerical method for reliable judgment under various load conditions of the CJS composite structural system. Variable values optimized for the CJS synthetic structural system and the effects of multiple variables used for finite element analysis to present analytical modeling were compared and analyzed with experimental results. The Winfrith concrete model was used as a concrete material model that describes the confinement effect well, and the concrete structure was modeled with solid elements. Through geometric analysis of shell and solid elements, rectangular steel pipe columns and steel elements were modeled as shell elements. In addition, the slip behavior of the joint between the concrete column and the rectangular steel pipe was described using the Surface-to-Surface function. After finite element analysis modeling, simulation was performed for cyclic loading after assuming that the lower part of the foundation was a pin in the same way as in the experiment. The analysis model was verified by comparing the calculated analysis results with the experimental results, focusing on initial stiffness, maximum strength, and energy dissipation capability.
참고문헌 (29)
- Shen Q, "Performance and design of partially CFRP-jacketed circular CFT column under eccentric compression", Journal of Constructional Steel Research, 166, pp.105925~ (2020)
- Lin Y, "Experimental and numerical studies of the seismic behavior of a steel concrete composite rigid-frame bridge subjected to the surface rupture at a thrust fault", Engineering Structures, 205, pp.105~110 (2020)
- 박국동, "콘크리트 충전형 압축부재의 단면특성에 따른 구속효과 평가", 한국강구조학회 논문집, 22(4), pp.365~375 (2010), 한국강구조학회
- Moharrami M, "Finite element analysis of damage and failure of reinforced concrete members under earthquake loading", Earthquake Engng Struct Dyn, 46, pp.2811~2829 (2017)
- Azad S, "Numerical investigation of steel and composite beam-to-encased composite column connection via a through-plate", 31, pp.14~28 (2021)
- Farhad Ahadi Koloo, "Investigation of Proposed Concrete Filled Steel Tube Connections under Reversed Cyclic Loading", International Journal of STEEL STRUCTURES, 18(1), pp.163~177 (2018), 한국강구조학회
- Aghdamy S, "Effects of load-related parameters on the response of concrete-filled double-skin steel tube columns subjected to lateral impact", Journal of Constructional Steel Research, 138, pp.642~662 (2017)
- Abedini M, "Blast Performance of Concrete Columns Retrofitted with FRP using Segment Pressure Technique", Composite Structures, 260(2) (2020)
- Xu J, "Behaviour of ultra high performance fibre reinforced concrete columns subjected to blast loading", Engineering Structures, 118, pp.97~107 (2016)
- Asgarpoor M, "Investigation of various concrete material to simulate seismic response of RC structure", Structures, 29, pp.1322~1351 (2020)
- "LS-DYNA KEYWORD USER’S MANUAL VOl.1", Livemore Software Technology Corporation, ~ (2007)
- 유승운, "콘크리트 손상 소성모델을 이용한 FRP-콘크리트 합성보의 비선형 유한요소해석에서 여러 변수들의 영향", 한국산학기술학회논문지, 18(2), pp.697~703 (2017), 한국산학기술학회[DOI]
- Lee JH, "Large Crack Model and Its Numerical Algorithm for Damage Analysis of Dynamically Loaded Structures", Earthquake Engineering Society of Korea
- Daniel K. Coleman, "Evaluation of Concrete Modeling in LS-DYNA for Seismic Application", pp.2016
- Malvar LJ, "Concrete Material Modeling in Explicit Computations", Workshop on Recent Advances in Computational Structural (1996)
- Crawford JE, "Use and Validation of The Release Ⅲ K&C. Concrete Material Model in LS-DYNA" (2012), Karagozian&Case
- Wu Y, "Concrete fragmentation modeling using coupled finite element - meshfree formulations" (2013), Techno-Press
- Wu Y, "Performance of LS-DYNA Concrete Constitutive Models", 12th International LS-DYNA Users Conference
- Schwer L, "An Introduction to the Winfrith Concrete Model" (2010), Schwer Engineering & Consulting Services
- 김재요, "압축력을 받는 콘크리트에 대한 세 직교 응력 성분을 이용한 소성 모델", 콘크리트학회 논문집, 16(3), pp.345~356 (2004), 한국콘크리트학회
- Asgarpoor M, "Investigation of various concrete materials to simulate seismic response of RC structures", Structures, 29 (2020)
- Shin JU, "Multi-hazard performance criteria for non-ductile reinforced concrete frame buildings retrofitted with an FRP column jacketing system" (2017), Georgia Institute of Technology
- Lee HS, "Performance verification through finite element analysis (FEM) of steel link and eccentric frame-type progressive system that can respond to earthquakes step by step", pp.2020
- 임창규, "CFT와 합성보로 이루어진 CJS합성구조시스템의 내진성능 실험 연구", 한국지진공학회논문집, 26(2), pp.83~93 (2022), 한국지진공학회[DOI]
- Zhao MZ, "Modeling recommendations for RC and CFST sections in LS-Dyna including bond slip", Engineering Structures, 229, pp.111612~ (2021)
- Vulcu C, "Beam-to-CFT High-Strength Joints with External Diaphragm 1:Design and Experimental Validation", Journal of Structural Engineering, 143(5) (2017)
- Shin KJ, "Seismic Behavior of CFT Column-to-Beam Connections" (2008), Earthquake Engineering Society of Korea
- 이승우, "T 스티프너를 이용한 CFT기둥-H 형강보 실대형 접합부의 비선형 해석", 한국강구조학회 논문집, 14(6), pp.835~843 (2002), 한국강구조학회
- Rackauskaite E, "Model parameter sensitivity and benchmarking of the explicit dynamic solver of LS-DYNA for structural analysis in case of fire", Fire Safety Journal, 90, pp.123~138 (2017)