실험자료를 기반한 국내 원형단면 철근콘크리트 휨교각의 손상수준 별 횡변위비 산정
Estimation of Drift Ratio by Damage Level for Flexural RC Piers With Circular Cross-Section Based on Experimental Data in Korea
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to determine fragility curves, the limit state of piers for each damage level is suggested in this paper based on the previous test results in Korea, including our test results. In previous studies, the quantitative measures for damage levels of piers have been represented by curvature ductility, lateral drift ratio, or displacement ductility. These measures are transformed to lateral drift ratios of piers for consistency, and the transformed values are compared and verified with our push-over test results for flexural RC piers with a circular cross-section. The test specimens are categorized concerning the number of lap-splices in the plastic hinge region and whether seismic design codes are satisfied or not. Based on the collected test results in Korea, including ours, the lateral drift ratio for each pier damage level is suggested.
Abstract
In order to determine fragility curves, the limit state of piers for each damage level is suggested in this paper based on the previous test results in Korea, including our test results. In previous studies, the quantitative measures for damage levels of piers have been represented by curvature ductility, lateral drift ratio, or displacement ductility. These measures are transformed to lateral drift ratios of piers for consistency, and the transformed values are compared and verified with our push-over test results for flexural RC piers with a circular cross-section. The test specimens are categorized concerning the number of lap-splices in the plastic hinge region and whether seismic design codes are satisfied or not. Based on the collected test results in Korea, including ours, the lateral drift ratio for each pier damage level is suggested.
참고문헌 (16)
- Lee JH, "Development of Post-earthquake Safety Evaluation Manual for Buildings", National Disaster Management Institute, ~ (2012)
- Korea National Railway, "Bridge Seismic Design Criteria in Korea(KDS 24 17 10)", Ministry of Land, Infrastructure and Transport, ~ (2016)
- AASHTO, "AASHTO LRFD Bridge Design Specifications", ~ (2020)
- HAZUS, "Multihazard Loss Estimation Methodology, Technical Manual", National Institute of Building for the Federal Emergency Management Agency, 5.13~5.20 (2020)
- Dutta A, "Seismic Fragility Analysis of Highway Bridges", INCEDE-MCEER Center-to-Center Workshop on Earthquake Engineering Frontiers in Transportation Systems (1998)
- 정영수, "철근콘크리트 교각의 연성능력에 따른 지진취약도", 콘크리트학회 논문집, 19(1), pp.91~102 (2007), 한국콘크리트학회
- Korea Facilities Safety Corporation, "Seismic Performance Evaluation Guidelines for Existing Facilityes", Ministry of Land, Transport and Maritime Affairs, ~ (2011)
- International Conference of Building Officials, "Uniform Building Code", ICBO, ~ (1997)
- Earthquake Engineering Society of Korea, "General Seismic design (KDS 17 10 00)", Ministry of Land, Infrastructure and Transport, ~ (2018)
- 박창규, "철근콘크리트 교각의 내진성능평가를 위한 심부구속철근비에 관한 연구", 박사, 구조공학, pp.2005
- Park JY, "Evaluation of Seismic Performance for RC Bridge Piers According to Longitudinal Steel Connection Method", Journal of the Korea Concrete Institude, 14(2), pp.323~329 (2002)
- Chung YS, "Quasi-Static Test for Seismic Performance of R", C Bridge Piers with Lap Splices, 2001, pp.13(1), 877~882
- Kim H, "Quasi-Static Test for Seismic Performance of Reinforced Concrete Bridge Piers with Lap Splice", Journal of the Korea Concrete Institude, pp.941~946 (2002)
- Seok SG, "The Experimental Study on Seismic Performance of RC Bridge Columns with Longitudinal Steel Lap Splice", Journal of the Korea Concrete Institude, 13(1), pp.553~559 (2001)
- Chung YS, "Seismic Performance Evaluation of Full-size Non-seismic Circular RC Bridge Piers with Longitudinal Steel Lap splice", 16(5), pp.697~707 (2004)
- 이대형, "주철근 겹침이음된 형상비 4.0의 원형 철근콘크리트 교각의 내진성능평가", 대한토목학회 논문집A, 22(5-A), pp.1193~1202 (2002), 대한토목학회