KDS 41 20 00의 기둥 띠철근 간격 변화가 건물골조 시스템의 변형의 적합성에 미치는 영향
An Effect of Column Stirrup Spacing Change in KDS 41 20 00 on the Deformation Compatibility of Building Frame Systems
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
There have been meaningful changes in column stirrup spacing by KDS 41 20 00 in 2022, which is to decrease one of the spacing limits from the minimum section dimension to half of the minimum section dimension. Decreased column stirrup spacing increases the seismic shear resistance of columns and the seismic performance of the entire building. Among the effects of the column stirrup spacing change, this study focused on deformation compatibility in the seismic design of building frame system buildings with ordinary shear walls for seismic design category D. The beams and columns in building frame systems shall satisfy moment and shear strength, or deformation capability induced by seismic design displacement for satisfaction of the deformation compatibility. The commentary of KDS 41 17 00 describes that the deformation compatibility check can be ignored if the members in moment frames are upgraded to intermediate section details. The study showed that the deformation compatibility of columns was satisfied without additional consideration if the building frame systems were designed by the decreased column spacing in KDS 41 20 00. However, beams adjacent to walls needed further consideration, such as the recommendation of commentary in the code.
Abstract
There have been meaningful changes in column stirrup spacing by KDS 41 20 00 in 2022, which is to decrease one of the spacing limits from the minimum section dimension to half of the minimum section dimension. Decreased column stirrup spacing increases the seismic shear resistance of columns and the seismic performance of the entire building. Among the effects of the column stirrup spacing change, this study focused on deformation compatibility in the seismic design of building frame system buildings with ordinary shear walls for seismic design category D. The beams and columns in building frame systems shall satisfy moment and shear strength, or deformation capability induced by seismic design displacement for satisfaction of the deformation compatibility. The commentary of KDS 41 17 00 describes that the deformation compatibility check can be ignored if the members in moment frames are upgraded to intermediate section details. The study showed that the deformation compatibility of columns was satisfied without additional consideration if the building frame systems were designed by the decreased column spacing in KDS 41 20 00. However, beams adjacent to walls needed further consideration, such as the recommendation of commentary in the code.