인산석고 시멘트 혼합토의 공학적 환경적 특성 연구
A Study on the Engineering and Environmental Characteristics of Phosphogypsum-Cement-Soil Mixtures
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study aimed to investigate the engineering and environmental characteristics of phosphogypsum-cement-soil mixtures composed of phosphogypsum, soil, and a small amount of cement was analysed on the basis of the unconfined compression test, the tensile strength test, the freezing and thawing test, the wetting and drying test, SEM and EDS analysis, XRD analysis and Leaching test. The specimens were manufactured with soil, cement and phosphogypsum. The cement contents was 10 %, and the phosphogypsum contents was 10, 20, 30, and 40 % by the weight of total dry soil. Each specimen was manufactured after curing at constant temperature and humidity room for 3, 7 and 28 days, after which the engineering characteristics of phosphogypsum-cement-soil mixtures were investigated using the unconfined compression test, the tensile strength test, the freezing and thawing test, the wetting and drying test. The basic data were presented for the application of phosphogypsum-cement-soil mixtures as construction materials. To investigate the environmental characteristics, leaching test was performed and the leaching test results were far below than of regulatory requirement of Waste Management Act in Korea. Therefore the results show that phosphogypsum is environmentally safe and can be used as construction materials in environmental aspect.
Abstract
This study aimed to investigate the engineering and environmental characteristics of phosphogypsum-cement-soil mixtures composed of phosphogypsum, soil, and a small amount of cement was analysed on the basis of the unconfined compression test, the tensile strength test, the freezing and thawing test, the wetting and drying test, SEM and EDS analysis, XRD analysis and Leaching test. The specimens were manufactured with soil, cement and phosphogypsum. The cement contents was 10 %, and the phosphogypsum contents was 10, 20, 30, and 40 % by the weight of total dry soil. Each specimen was manufactured after curing at constant temperature and humidity room for 3, 7 and 28 days, after which the engineering characteristics of phosphogypsum-cement-soil mixtures were investigated using the unconfined compression test, the tensile strength test, the freezing and thawing test, the wetting and drying test. The basic data were presented for the application of phosphogypsum-cement-soil mixtures as construction materials. To investigate the environmental characteristics, leaching test was performed and the leaching test results were far below than of regulatory requirement of Waste Management Act in Korea. Therefore the results show that phosphogypsum is environmentally safe and can be used as construction materials in environmental aspect.
참고문헌 (17)
- Ahmed, A., "Investigation of recycled gypsum in conjunction with waste plastic trays for ground improvement", Construction and Building Materials, 25, pp.208~217 (2011)
- Blight,G.E., "Waste gypsum as an embankment material", Proc. of the Seventh International Conference on Soil Mechanics and Foundation Engineering, pp.39~43 (1969)
- Chamberlain, E. J, "Effect of freeze-thaw on the permeability and macrostructure of soils", Proceedings International Symposium on Frozen Soil Impacts on Agricultural Range and Forest Lands, pp.145~155 (1990)
- Garg, M, "Environment hazard mitigation of waste gypsum and chalk: Use in construction materials", Construction and Building Materials, 25, pp.944~949 (2011)
- Jo, B. W, "The study on the development of construction materials with chemical by-product gypsum", Proc. of the Korean Concrete Institute Conference, pp.351~354 (2000)
- Kellsen, K. O, "Heat curing and post-heat curing regimes of high-performance concrete: influence on microstructure and C-S-H composition", Cement and Concrete Research, 26(2), pp.295~307 (1996)
- 김영익, "시료 크기에 따른 CSG재료의 압축강도 및 미세 구조 특성", 한국농공학회논문집, 52(4), pp.93~101 (2010), 한국농공학회
- 김영상, "인산석고-EPS 조각을 활용한 경량혼합토의 공학적 특성", 한국지반환경공학회 논문집, 10(6), pp.19~25 (2009), 한국지반환경공학회
- Kim, W. B, "Geotechnical characterization of artificial aggregate made from phosphogymsum as a drainage material", 석사, pp.2010
- Koo, J. W, "A Laboratory study for reclamation of salt-affected soils by gypsum amendment and water management practices", Journal of the Korean Society of Agricultural Engineers, 26(2), pp.85~96 (1984)
- Lee, Y. S, "The engineering and environmental properties for utilization of phosphogypsum as embankment materials", Journal of the Korean Geotechnical Society, 17(4), pp.331~339 (2001)
- Mun, K. J, "The strength properties of cement matrix containing high-volume wasted phosphogypsum with binder types", Proc. of the Korean Concrete Institute Conference, pp.881~884 (2006)
- Oh, Y. I, "Geotechnical characteristics and environmental effect of reclaimed land by utilizing waste gypsum", The KSCE Journal of Civil Engineering, 21(1C), pp.19~26 (2001)
- Pericleous, M. I, "Resilient modulus in civil engineering", Journal of Materials in Civil Engineering, 8(1), pp.7~10 (1996)
- Petrukhin, V. P, "Gypsum and Saline Soils", Proc. of the Thirteenth International Conference on Soil Mechanics and Foundation Engineering, pp.265~266 (1994)
- Taha, R, "Utilization of by-product gypsum in road construction", 박사, pp.1989
- Wrench, B. P, "Compressibility of neutralized phosphogypsum", Proc. of the Eleventh International Conference on Soil Mechanics and Foundation Engineering, 통권 : 3, pp.1321~1326 (1985)