시료 크기에 따른 CSG재료의 압축강도 및 미세 구조 특성
Unconfined Compressive Strength and Micro-Structure Properties of CSG Materials Due to Specimen Size
2
조회
0
다운로드
2
인용
0
참고문헌
초록
The purpose of this study is to provide basic data for utilization in environment-friendly and economically outstanding CSG construction method by physical and mechanical properties of CSG materials including characteristics of uniaxial compressive strength, microscopic structure and freezing and thawing resistance in accordance with the cement content and curing time of the cement, and size of specimen. In this study, specimens with cement content of 4, 6, 8 and 10% of the total weight were, and, in order to examine the characteristics of the sizes of specimen, specimens with φ50×100 ㎜, φ100×200 ㎜ and φ150×300 ㎜ were manufactured to assess the features including compressive strength, microscopic structure, freezing and thawing, and degree of wet-dry. As results, it was found that with greater size specimen or contents of cement in the specimen, compressive strength, freezing and thawing resistance, and wet-dry resistance increase. Moreover, reactive products for each size of specimen were examined and it was possible to verify that some typical needle structured ettringite was generated due to blending of cement through microscopic structure analysis such as SEM and EDS analysis.
Abstract
The purpose of this study is to provide basic data for utilization in environment-friendly and economically outstanding CSG construction method by physical and mechanical properties of CSG materials including characteristics of uniaxial compressive strength, microscopic structure and freezing and thawing resistance in accordance with the cement content and curing time of the cement, and size of specimen. In this study, specimens with cement content of 4, 6, 8 and 10% of the total weight were, and, in order to examine the characteristics of the sizes of specimen, specimens with φ50×100 ㎜, φ100×200 ㎜ and φ150×300 ㎜ were manufactured to assess the features including compressive strength, microscopic structure, freezing and thawing, and degree of wet-dry. As results, it was found that with greater size specimen or contents of cement in the specimen, compressive strength, freezing and thawing resistance, and wet-dry resistance increase. Moreover, reactive products for each size of specimen were examined and it was possible to verify that some typical needle structured ettringite was generated due to blending of cement through microscopic structure analysis such as SEM and EDS analysis.
참고문헌 (23)
- Airey, D. W., "Triaxial testing on naturally cemented carbonate soil", Journal of Geotechnical Engineering Division, 119(11), pp.1379~1398 (1993), ASCE
- Bae, K. U., "Laboratory and in-situ mix designs for applications of the CSG method", 석사, pp.2006
- Bressani, L. A., "Damage to soil during triaxial testing", Proc. of the 12th Int. Conf. on Soil Mech. and Found. Engrg., Rotterdam, pp.17~20 (1989)
- Catton M. D., "Farly soil-cement research and development", J. of the High-way Div., pp.1~15 (1959), ASCE
- 채교익, "흙-벤토나이트 혼합물의 투수특성", 한국농공학회논문집, 45(1), pp.55~62 (2003), 한국농공학회
- Chang, T., "Effect of particle contact bond on shear modulus", J. Geotech. Eng., 188(8), pp.1216~1233 (1992), ASCE
- Cho, J. G., "A study on the physical characteristics of soil-cement", Journal of the Korea Society of Agricultural Engineers, 16(3), pp.3533~3538 (1974)
- Clough, W. G., "Silicate-stabilized sands", J. Geotech. Eng. Div., 105(1), pp.65~82 (1979), ASCE
- Do, D. H., "Improvement of soil-cement with additives", Journal of the Korea Society of Agricultural Engineers, 21(1), pp.63~77 (1980)
- Gens, A., "Conceptual bases for a constitutive model for bonded soils and weak rocks. In: Geotechnical engineering of hard soils-soft rocks", pp.485~494 (1993)
- 한재명, "환경친화형 親水護岸블록 수리특성", 한국해안·해양공학회논문집, 19(2), pp.179~182 (2007), 한국해안,해양공학회
- Hou, Y. J., "Centrifuge modelling of cutoff wall for CFRD built in deep overburden", In Proc. of Int. Conf. of Hydropower, pp.86~92 (2004)
- Kellsen, K. O., "Heat Curing and post-heat curing regimes of high-performance concrete: influence on microstructure and C-S-H composition", Cement and Concrete Research, 26(2), pp.295~307 (1996)
- Kim, J. Y., "A study on the effects of molding water content and cement content on unconfined compressive strength of soil cement mixtures", Journal of the Korea Society of Agricultural Engineers, 17(1), pp.3685~3701 (1975)
- 김기영, "Cemented Sand and Gravel 재료의 강도특성", 한국지반공학회논문집, 21(10), pp.61~72 (2005), 한국지반공학회
- 김상철, "시멘트 혼합토의 강도 특성", 한국농공학회논문집, 47(3), pp.49~56 (2005), 한국농공학회
- Kong, K. Y., "Study on the mechanical properties of low mix soil-cement", Journal of the Korea Society of Agricultural Engineers, 43(6), pp.127~134 (2001)
- Reddy, K. R., "Constitutive modelling of cemented sand", Mech. of Mat., 14(2), pp.155~178 (1992)
- Suh, W. M., "A study on the effects of molding pressure on the compressive strength and durability of soil-cement mixture", Journal of the Korea Society of Agricultural Engineers, 20(1), pp.4575~4591 (1978)
- Tashio, H., "Design concept of trapezoid-shaped CSG dam. in: Roller Compacted Concrete Dams", pp.457~464 (2003)
- Watanabe, K., "Strength charateristics of cement mixed gravel evaluated by large triaxial compression test", Proc. 3rd Int. Symp. on Deformation Characteristics of Geomaterials, pp.683~693 (2003)
- 연규석, "CSG 재료의 압축강도 특성 및 동결융해 저항성", 한국농공학회논문집, 52(1), pp.51~59 (2010), 한국농공학회
- 윤준노, "폐활성탄을 사용한 다공성 콘크리트의 물리․역학적 성질", 한국농공학회논문집, 51(4), pp.21~27 (2009), 한국농공학회