함수비를 고려한 모래의 상대밀도 추정을 위한 Fall Cone 관입량의 적용
Application of Penetration in Fall Cone Test to Estimate Relative Density with Variation of Water Content for Sand
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Relative density, used to express dynamics condition of sand quantitatively, is measured by RI Test, Standard Penetration Test and Cone Penetration Test. Each measurement method has demerits, which is complicated or needs a specific analysis instrument and an analysis of expert. Also the ground is in wet condition commonly because of an unsaturated zone between a saturated zone and a surface, so the behaviour of the ground has different engineering properties unlike the dry ground and it diminishes accuracy of measuring relative density. In this study, the correlation between relative density and penetration of fall cone test in dry condition and wet condition with variation of water content was analyzed and a simple measuring method for relative density was suggested. As a result, there were difference of penetration between dry sands and wet sands, the correlation between relative density and penetration showed linear expression and relative density could be measured by the linear relation.
Abstract
Relative density, used to express dynamics condition of sand quantitatively, is measured by RI Test, Standard Penetration Test and Cone Penetration Test. Each measurement method has demerits, which is complicated or needs a specific analysis instrument and an analysis of expert. Also the ground is in wet condition commonly because of an unsaturated zone between a saturated zone and a surface, so the behaviour of the ground has different engineering properties unlike the dry ground and it diminishes accuracy of measuring relative density. In this study, the correlation between relative density and penetration of fall cone test in dry condition and wet condition with variation of water content was analyzed and a simple measuring method for relative density was suggested. As a result, there were difference of penetration between dry sands and wet sands, the correlation between relative density and penetration showed linear expression and relative density could be measured by the linear relation.
참고문헌 (23)
- American Society for Testing and Materials, "D4253-00 Standard Test method for maximum indexdensity of soils using a vibratory table", ASTM, ~ (2000)
- American Society for Testing and Materials, "D4254-00 Standard Test method for maximum indexdensity of soils and calculation of relative density", ASTM, ~ (2000)
- Busscher, W. J., "Correction of cone index for soil water content differences in a coastal plain soil", Soil & Tillage Reserch, 43, pp.205~217 (1997)
- Cha, B. G., "Unsaturated shear strength characteristics of Nak-dong River silty sand", 석사, pp.2011
- Feng, T. W., "Fall-cone penetration and water content relationship of clays", Geotechnique, 50(2), pp.181~187 (2000)
- JSF T-161 : Test method for minimum and maximum densities of sands, "Japaness Committee of Soils Mechanics and Foundation Engineering", 174~175 (1990)
- 이재형, "Fall cone과 수화열을 이용한 흙-시멘트 혼합물의 상 변화 연구", 한국지반공학회논문집, 20(9), pp.18~25 (2004), 한국지반공학회
- 김태형, "습윤 모래에서 인장강도의 예측 (I) : 이론", 한국지반공학회논문집, 24(6), pp.27~35 (2008), 한국지반공학회
- Koumoto, T., "Theory and practice of the fall cone test", Geotechnique, 51(8), pp.701~712 (2001)
- Korean Standard, "KS F 2345 : Testing method for relative density of cohesionless soils", ~ (2004)
- Kwon, O. K, "An experimental study on the determination of the relative density", 석사, pp.1986
- Lambe, T. W., "Soil Mechanics", pp.30~31 (1979), John Wiley & sons
- 김태형, "Tensile Strength of Unsaturated Sand", JOURNAL OF ENGINEERING MECHANICS-ASCE, 135(12), pp.1410~1419, ASCE-AMER SOC CIVIL ENGINEERS
- Lu, N., "Tensile strength characteristics of unsaturated sands", Journal of Geotechnical and Geoenvironmental Engineering, 133(2), pp.144~154 (2007)
- 박재성, "휴대용콘의 선단저항값을 이용한 모래의 상대밀도 및 내부마찰각 추정", 한국농공학회논문집, 54(4), pp.137~145 (2012), 한국농공학회[DOI]
- Richefeu, V., "Shear strength properties of wet granular materials", Physical Review, 73(5), pp.051304~ (2006)
- 손영환, "Fall cone을 이용한 풍화토의 풍화도 측정(실트질 모래에 대하여)", 한국농공학회논문집, 50(1), pp.63~71 (2008), 한국농공학회
- 손영환, "풍화토층의 구분을 위한 시험법의 적용", 한국농공학회논문집, 51(3), pp.63~69 (2009), 한국농공학회
- Song, H. D., "Triaxial compression characteristics of unsaturated sands with poor particle size distribution", 석사, pp.2011
- 송영우, "폴콘을 이용한 유류 오염 점토지반의 전단강도 예측", 지하수토양환경, 15(6), pp.107~113 (2010), 한국지하수토양환경학회
- Wood, D. M., "Some fall-cone tests", Geotechnique, 35(1), pp.64~68 (1985)
- Wroth, C. P., "Correlation of index properties with some basic engineering properites of soils", Canadian Geotechnical Journal, 15(2), pp.137~145 (1978)
- Zentar, R., "Fall cone test to characterize shear strength of organic sediments", Journal of Geotechnical and Geoenvironmental Engineering, 135(1), pp.153~157 (2009)