표준압밀시험에 의한 점토의 초기탄성계수 산정
The Estimation of Initial Elastic Modulus of Clay by Standard Consolidation Test
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Unlike artificially created homogeneous materials, the process of calculating the elastic modulus of natural soil involves the possibility of errors. Because the stress-strain behavior of soil is nonlinear, the secant modulus of elasticity is often used based on 1/2 of the stress at failure. Since soil has the property of changing its elastic modulus depending on the confining pressure, numerical analysis models that analyze its behavior inevitably include complex elements. The hyperbolic model, which relatively accurately simulates the behavior immediately after loading in soft ground, assumes that the stress-strain curve of the consolidated undrained triaxial test is hyperbolic and requires the slope of the tangent line at the starting point. However, the slope of the initial tangent in the stress-strain curve obtained from an actual triaxial test is difficult to have regularity according to changes in confining pressure. Additionally, due to the characteristics of a hyperbola, even small changes in related factors cause large changes in the hyperbola. Therefore, there is a lot of randomness in the process of calculating model parameters from the triaxial test results, which causes large differences in the results. Therefore, the method of calculating the initial elastic modulus by the consolidation test presented in this study is also used to verify the method by the triaxial test. It can be applied. However, since this study was applied to only one sample showing typical consolidation characteristics, it is necessary to check samples with various physical properties in the future.
Abstract
Unlike artificially created homogeneous materials, the process of calculating the elastic modulus of natural soil involves the possibility of errors. Because the stress-strain behavior of soil is nonlinear, the secant modulus of elasticity is often used based on 1/2 of the stress at failure. Since soil has the property of changing its elastic modulus depending on the confining pressure, numerical analysis models that analyze its behavior inevitably include complex elements. The hyperbolic model, which relatively accurately simulates the behavior immediately after loading in soft ground, assumes that the stress-strain curve of the consolidated undrained triaxial test is hyperbolic and requires the slope of the tangent line at the starting point. However, the slope of the initial tangent in the stress-strain curve obtained from an actual triaxial test is difficult to have regularity according to changes in confining pressure. Additionally, due to the characteristics of a hyperbola, even small changes in related factors cause large changes in the hyperbola. Therefore, there is a lot of randomness in the process of calculating model parameters from the triaxial test results, which causes large differences in the results. Therefore, the method of calculating the initial elastic modulus by the consolidation test presented in this study is also used to verify the method by the triaxial test. It can be applied. However, since this study was applied to only one sample showing typical consolidation characteristics, it is necessary to check samples with various physical properties in the future.
참고문헌 (21)
- Alpan, I., "The empirical evaluation of the coefficient K0 and K0·R", Soil and Foundation, 7(1), pp.31~40 (1967)
- American Standard Testing Material, "ASTM D4767-11 : 2020 Standard test method for consolidated undrained triaxial compression test for cohesive soils", ~ (2020)
- Brooker, E. W., "Earth pressures at rest related to stress history", Canadian Geotechnical Journal, 2(1), pp.1~15 (1965)
- Duncan, J. M., "Nonlinear analysis of stress and strain in soils", Jounal of the Soil Mechanics and Foundation Division, 96(SM5), pp.1629~1653 (1970)
- Kenney, T. C., "Discussion of “Geotechnical properties of glacial lake clays”", Journal of the Soil Mechanics and Foundations Division, 85(3), pp.67~79 (1959)
- Kim, Y. S., "Characteristics of undrained static shear behavior for sand due to aging effect", Journal of the Korean Geotechnical Society, 20(6), pp.137~150 (2004)
- Korean Agency for Technology and Standards, "KS F 2346 : 2022 Test method for unconsolidated undrained strength of cohesive soils in triaxial compression test", ~ (2022)
- Kwon, B. H., "A Study on the beginning point of secondary compression in consolidation theory", Journal of the Korean Society of Agricultural Engineers, 65(6), pp.51~63 (2023)
- Lee, K. S., "The estimation of the constrained modulus and the coefficient of consolidation from the piezocone penetraition test data", Journal of the Korean Geoenvironmental Society, 8(4), pp.47~55 (2007)
- Leonards, G. A., "Compressibility of clay", Journal of the Soil Mechanics and Foundations Division, 90(SM5), pp.133~155 (1964)
- Lim, S. H., "Final settlement prediction methods of embankment on soft clay by back analysis", Master, pp.1999
- Mesri, G., "Coefficient of secondary compression", Journal of Soil Mechanics and Foundations Division ASCE, 99(SM1), pp.123~137 (1973)
- "GTS NX USER MANUAL > Mesh > Property, Coordinate, Function > Material > Material Property(General)"[URL]
- Oh, B. S., "Evaluation of deformation characteristics of residual soils under K0 condition at full strain ranges", Journal of The Korean Society of Hazard Mitigation, 12(5), pp.121~126 (2012)
- Park, C. S., "Characteristics of shear strength parameters of various soils by direct shear test", Tunnel and Underground Space, 31, pp.584~595 (2018)
- Roscoe, K. H., "Engineering Plasticity", pp.535~609 (1968), Cambridge University Press
- Roscoe, K. H., "On the Yielding of Soils", Geotechnique, 8, pp.22~53 (1958)
- Tan, S. A., "Hyperbolic method for settlement in clays with vertical drains", Canadian Geotechnical Journal, 31, pp.125~131 (1994)
- Terzaghi, K., "Die Berechnung der Durchlässigkeitsziffer des Tones aus dem Verlauf der Hydrodynamischen Spannungserscheinungen, Sitz, Akademie der Wissenschaften", Mathematish-Naturwissenschaftliche, 132, pp.125~138 (1923)
- Sharma, L. K., "Evaluating the modulus of elasticity of soil using soft computing system", Engineering with Computer: An International Journal for Simulation-Based Engineering, 33(3), pp.497~507 (2017)
- Yoon, H. K., "Field elastic wave and electrical resistivty penetrometer for evaluation of elastic moduli and void ratio", Journal of the Korean Society of Civil Engineers C, 30(2C), pp.85~93 (2010)