혼-타의 수평틈새가 캐비테이션에 미치는 영향에 관한 수치적 연구
A Numerical Study on the Influence of the Horizontal Gap upon the Cavitation Behavior of a Horn Type Rudder
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Recently, as container ships become larger and faster, rudder cavitations are more frequently observed near the gap between the horn and rudder plates of the ships to cause serious damages to the rudder surface of the ship. The authors already have suggested through a series of model experiments and numerical computations that employment of an appropriate blocking device for gap flow may retard the gap cavitation. For examples, a cam device installed near the outer edges of the vertical gap or a water-injection device combined with a pair of half-round bars installed inside the gap can considerably reduce the gap cavitation. However, it is also found that effective blocking of the flow through the vertical gap results in growth of the cavitation near the horizontal gap instead. In the present study, effectiveness of the simultaneous blocking of the flow through the horizontal and vertical gaps of a horn type rudder in minimizing the damage by gap cavitation is studied. Additional blocking disks are inserted inside the horizontal gaps on the top and bottom of the pintle block and numerical computations are carried out to confirm the combined effect of the blocking devices.
Abstract
Recently, as container ships become larger and faster, rudder cavitations are more frequently observed near the gap between the horn and rudder plates of the ships to cause serious damages to the rudder surface of the ship. The authors already have suggested through a series of model experiments and numerical computations that employment of an appropriate blocking device for gap flow may retard the gap cavitation. For examples, a cam device installed near the outer edges of the vertical gap or a water-injection device combined with a pair of half-round bars installed inside the gap can considerably reduce the gap cavitation. However, it is also found that effective blocking of the flow through the vertical gap results in growth of the cavitation near the horizontal gap instead. In the present study, effectiveness of the simultaneous blocking of the flow through the horizontal and vertical gaps of a horn type rudder in minimizing the damage by gap cavitation is studied. Additional blocking disks are inserted inside the horizontal gaps on the top and bottom of the pintle block and numerical computations are carried out to confirm the combined effect of the blocking devices.
참고문헌 (14)
- Bu, K.T, "Numerical Simulation for the Rudder in Order to Control the Cavitation Phenomena", Journal of Ship and Ocean Technology, 8(1), pp.42~50 (2004)
- 최정은, "2차원 혼 타 단면의 간극유동 특성에 대한 연구", 대한조선학회 논문집, 44(2), pp.101~110 (2007), 대한조선학회
- 최정은, "혼 타 주위의 캐비테이팅 유동 특성에 대한 연구", 대한조선학회 논문집, 44(3), pp.228~237 (2007), 대한조선학회
- 이창섭, "초대형 컨테이너선박 방향타의 캐비테이션 수치계산 및 검증", 대한조선학회 논문집, 43(5), pp.568~577 (2006), 대한조선학회
- 김성표, "혼-타의 간극 캐비테이션 침식 저감을 위한 실험적 연구", 대한조선학회 논문집, 43(5), pp.578~585 (2006), 대한조선학회
- Oh, J.K, "Rudder Gap Cavitation and its Suppression Devices", Proc. of FEDSM2008, pp.10~14 (2008)
- 오정근, "차단 봉이 혼과 타판 사이에 대칭으로 배치된타의 틈새유동 수치해석", 대한조선학회 논문집, 46(5), pp.460~470 (2009), 대한조선학회
- Oh, J.K, "A Numerical Study for Reduction of Rudder Cavitation with Gap Flow Retadation", Proc. of 10th FAST2009, pp.51~62 (2009)
- Paik, B.G, "Experimental Study on the Gap Entrance Profile Affecting Rudder Gap Cavitation", Journal of Ocean Engineering, 35, pp.139~149 (2008)
- 백부근, "Semi-spade 타의 간극 캐비테이션에 대한 실험적 연구", 대한조선학회 논문집, 43(4), pp.422~430 (2006), 대한조선학회
- 서대원, "안정기 핀의 팁 보오텍스 캐비테이션 특성에미치는 날개 끝판의 효과", 대한조선학회 논문집, 45(1), pp.18~28 (2008), 대한조선학회
- Seo, D.W, "A Numerical Study for the Efficacy of Flow Injection on the Diminution of Rudder Cavitation", Proc. of 13th IMAM2009, pp.523~530 (2009)
- 서대원, "유체 공급장치를 활용한 간극유동 제어에 관한 수치적 연구", 대한조선학회 논문집, 46(6), pp.578~586 (2009), 대한조선학회
- Wilcox, D.C, "Turbulence Modeling for CFD" (1993), DCW Industries.